similar to: SS7 status report 2

All, is anyone using Bayonne in conjunction with Asterisk? I'm currently using only Bayonne, but I'm investigating the possibilities of switching the telephony frontend over to Asterisk, and have Asterisk route the IVR tasks to Bayonne through H323. Anyone care to share his views on this approach? Any pointers or do's and don'ts? All info is greatly appreciated! Regards,

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page

Hi, Does Asterisk support SS7? Google shows an old new post from Feb. 2002 stating that OpenSS7 would help add SS7 support to Asterisk, but presently OpenSS7 seems to be dead and I can't seem to find anything about it at Asterisk or Digium's sites. What happened? -- Regards, Tais M. Hansen ComX

Hi, I've posted this question on OpenSS7 mailing list but I didn't get a clear answer. I have a system running asterisk using Digium T400P card. Can this same card be used with OpenSS7 project to carry SS7 links? Is there any difference between these two cards? -- Matteo D'Amato Network/Telecom Administrator Intelco Communication Inc

Hi, one month ago, I announced, that I will look at the openss7 project in order to use it together with asterisk. It took a while for me to check the capabilities of and around the project. Since the openss7 project consists of only one person, and when there was just silence for a long time in the project's mailing list, I doubted, whether it was a good idea to consider using openss7. In

Hi, Is this card the same as the T410P, after all, it's made by Digium. There's one prior reference on the mailint list[1] but it didn't answer the question. There was also an SS7 status report[2] last June but it's doesn't seem to have lead anywhere either. There was post saying an SS7 release was immenent last September[3], but then silence. Any info anyone would like to

Hello.. I have a customer who wants to connect 2 PBX's over IP.. The setup should look like this: [PBX] <-- SS7 --> [Asterisk] <-- IAX --> [Asterisk] <-- SS7 --> [PBX] Since there are no SS7 cards , I was thinking at a way of carrying the E1 data as bulk...Can I do that ? How ? Is possible a scenario like this ? I'm thinking of IAX because I don't

Hi all, Does somebody know what's new with SS7 and * ? I'm very interested. Is it ready ? I'm prepared to pay if necessary. Thanks, Angel.

Has anyone tried to get dialogic ss7 trunking to work with Asterisk? I did some googling but nothing helpful turned up... Could a person get an intel dialogic and get * to see it like a zap channel? And use it for incoming and outgoing trunk access? -- respectfully, Joseph ------=============

Hello. I am new to this forum. If this issue has been discussed already, please inform me, but my STFW have indicated that it has not. If SS7 were available on * would it make commercial sense to use it? There are case studies on the web (courtesy of the Death Star :->) for ISPs with 10,000+ subscriber lines showing clear cost savings in transitioning from PRI to SS7 controlled IMT. My

Does anyone know of a device that will take an SS7 link and convert it to a PRI? -- respectfully, Joseph - (606) 477-2355 x140 ------=============

In reference to an old post from 2002: http://www.marko.net/asterisk/archives/0203/0103.html How does one go about doing this? Also, what is the present status of the OpenSS7 stack in Asterisk? What can it do now? And is there any possibility in the future of developing a DS3 card for it, if only for the purpose of mostly DACSing? Which is still a level of intelligent call control on the

I thought everyone should know this. Jorge, After reading your page in the http://voip-info.org/tiki-index.php?page=Asterisk+SS7 please advise Your U.S. customers that SS7 is not done the same way as in the rest of the world and the requirements are different. The U.S carrier's require 2 redundant links. I know this first hand because we run an SS7 network. CARDOSO Jorge Miguel wrote:

When are 'we' going to have this solution Steve? :) You keep talking about it, and we keep asking when it's going to come about. I know myself, SS7 will be a make or break for our continued use of Asterisk. Even if we had some price indications would be good, and/or a timeframe? Don't want to seem pushy, but it's been on the cards for quite some time now. Ben -----Original

> > >On Thu, 2003-11-13 at 16:50, Freddi Hansen wrote: > > >>>> >Freddi Hansen wrote: >>> >>> >>>>> >> with boards from Aculab, we are replacing Aculab boards with Digium >>>>> >> boards BUT we would need more >>>>> >> Digium boards IF we could use both Digium and Aculab cards in

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server with Digium E1 cards ( 4 port cards). This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total

I'm making outbound calls by placing call files in the asterisk outgoing directory. At times, the call would be hung by SS7 without even attempting (due to error in the outgoing number). I get the following on console: -- Attempting call on ss7/9297210213 for s at croom:1 (Retry 1) -- Sent IAM CIC=22 ANI=9134904821 DNI=9297210213 RNI= -- SS7 hangup 'SS7/callserver/22'

>Freddi Hansen wrote: >> with boards from Aculab, we are replacing Aculab boards with Digium >> boards BUT we would need more >> Digium boards IF we could use both Digium and Aculab cards in the same >> server. The reason being that >> TE410P doesn't support SS7-ISUP so we continue using only Aculab cards >> in the servers that must support >>

Hi all, I'm being requested to deploy an?IVR service?using SS7. I've deployed Asterisk before using ISDN connection, but never with SS7. Can anyone explain me the different between using ISDN and SS7 ? What need I do now to change to use SS7 ?. Many thanks, Giang -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Sangoma a104 card have in product specyfication support for Line protocol SS7 , http://www.sangoma.com/products/p_aft-104-specs.htm [..] Line protocols Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC. [..] Anyone of you guys use line protocol SS7 for E1/T1 termination in asterisk ? As far I know asterisk don't have support for SS7 signaling, but my telco wants to setup