similar to: forced ring on dial?

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

I have a problem that is almost certainly nat-related, but I can't figure out what's happening. Since moving the Sipura behind a NAT server (Linksys), I am no longer able to call between the two lines on the same Sipura. When I dial one extension from the other, it rings, but immediately after I pick up the ringing phone, the call is uncerimoniously dumped. I can tell the call

Is any one else having problems with Voicepulse today? Suddenly, I can't register and calls to my Voicepulse numbers get a fast busy. Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Following a(n apparently) failed attempt to upgrade a BT102, the phone is now brain-dead. Although it still has enough smarts to get a dhcp address and try to download the firmware and config, it never gets past the blue screen, nor will it respond to pings or port 80. Short of sending it back to Grandstream, is there any way to recover the phone? TIA Bruce Komito High Sierra Networks, Inc.

Greetings, I tried to build astcc, but the Makefile is looking for Asterisk/AGI.pm. Anyone have any idea where this file is supposed to be and where it comes from? I've dragged in everything I can think of from cvs, and * is otherwise running fine. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

I've been using realtime to store my voicemail configuration in a mysql table for several months now, and have had no problems...until today. A few weeks ago, I upgraded to the latest CVS and today I noticed voicemail is not updating the password when the user changes it through option 0. I'm not sure when this started happening, but I assume it was sometime after I upgraded. Has anyone

Since connecting a PRI to a Digium T100P, I have been seeing the following messages in syslog every few minutes: Jun 4 06:51:54 pbx asterisk[13435]: WARNING[1209214400]: chan_zap.c:6176 in zt_pri_error: PRI: Read on 56 failed: Unknown error 500 Jun 4 06:51:54 pbx asterisk[13435]: NOTICE[1209214400]: chan_zap.c:6913 in pri_dchannel: PRI got event: 8 on span 1 Sometimes, these messages come out

If you have a PRI terminated in a Cisco router talking SIP to * and would be willing to share your Cisco config, please respond. Also, I would be interested in knowing what version of IOS you are using. We are using an NM-HDV in a 3640. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Hi all, I bought a couple phones for really cheap just for a simple solution. I'm trying to get a few 7910 to work with *. I'm just not sure how to get them to work. The 7910 just sits there "configuring IP" Here is a copy of my skinny.conf. the extensions.conf is default. I just want to bring the system up in default before a start making changes. Do I need to make

If you have any experience using * (or VoIP in general) with DirecWay, please respond privately. I am particularly interested in experiences in Latin America. TIA! Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

If you have used * to support a pri as pri_net (as opposed to pri_cpe), either to talk to another * system or a PBX of some sort, I would be very interested in hearing about your experiences. Imparticular, I would like to know that it works before I invest in the extra hardware. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 284-5800 ext 115

Greetings, I have a new * system installed and everything works as it should except for one annoying little problem: I can't play any sound files. What this means is that when an extension script gets to the point where it should play a sound file (voicemail greeting, auto-attendant, whatever), the caller hears a click and then silence. According to the * log, the sound file is being

I have a PRI with a bunch of DID numbers on it. When I dial one of the DID numbers from the outside, the call is correctly routed, either to the auto-attendant or to the correct extension. However, all the caller hears until the call is answered is silence, i.e., no ringing. That's not so bad with the auto-attendant, because it answers right away, but it's kind of a problem for the

I am trying to figure out why calls between SIP devices and the PSTN are being regularly dropped after anywhere from 2-15 minutes. I have turned on everything I can think of, but I don't see any obvious reasons for the drops. All I can see from turning on debug and verbosity is two messages advising of a destroyed call, followed by normal-looking SIP and ZAP termination messages. The first

I've got someone sat in a home-office with an SPA921 behind NAT, and most probably a firewall. I've got a STUN-server running, and calling in from the SPA921 to our Asterisk box works fine - though I had to open the firewall for UDP traffic on port 10000-20000. Calling from our Asterisk to the SPA921 doesn't work. I'm guessing this is due to the NAT/firewall on the other side,

Hello, I was running a very simple test setup with * HEAD 7/15/2004 on Fedora Core 2 and things were working fine. Today I upgraded to RC1 and my asterisk service will no longer start. I downloaded the tarball, extracted, ran 'make', ran 'service asterisk stop', ran 'make install', removed all files in /etc/asterisk, ran 'make samples' and then ran 'service

Has anyone tried out the Linksys RT31P2 with Asterisk? Seems like a really great solution for remote users... even supports QoS. Too bad it doesn't also have VPN functionality built in. Here's a link to the product: http://www.linksys.com/products/product.asp?prid=652&scid=29 -Ron -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have several SIP devices (Sipuras) that are working fine with *, except for one annoying little problem. Occassionally, after being registered for some period of time, the Sipura returns a 404 Not Found to (I assume) an INVITE request. Of course, this makes the extension appear busy. When this happens, I check the Sipura and it is thinks it is still registered and I check * and it shows

When I enable NOTIFY messages in my SIP device (Sipura), Asterisk reports: handle_request: Unknown SIP command 'NOTIFY' from 'xxx.xxx.xxx.xxx' When I disable NOTIFY messages, * reports the device UNREACHABLE, followed by REACHABLE every couple of minutes. I think I want NOTIFY on, because the Sipura is behind a NAT server, but the constant stream of warnings from * make me think