similar to: Problems with X100P

I'm trying to switch from one call to another incoming call from PSTN. When I'm getting a "beep" I press flash but instead of swithing to the second call, I'm getting a dial tone. even if I press *0, I cannot connect to the second call. Anybody had this problem? Tx, Bogdan

I'm running into errors when using Enum lately. I can't figure out what the problem might be as I've had Enum up and running in the past. I'm running the latest CVS-Head compiled version. I've also tried using the new Enum function with the same results. When doing a lookup on a number that exists in the enum server I get the following results: -- Executing

Hi. I have a x100p card installed on my asterisk box... my zapata.conf file includes the following lines: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 echocancel=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 Basically, the zapata.conf file generated by make samples. Then in my extensions.conf I have this: [default] include => demo And demo is

I am trying to find an example of how to set up my FXS Station Card in my Asterisk. I have (1) XP100P I have (1) tdm20B (2 Port FXS) Could someone tell me if this is correct? /etc/zaptel.conf fxsks=1 fxoks=2 fxoks=3 loadzone=us defaultzone=us /etc/asterisk/zapata.conf [channels] ; language=en ; ;X100P Port 1 context=inbound-analog signalling=fxs_ks usecallerid=yes echocancel=yes

Hello All, I am getting a set of errors when I boot Asterisk that I have not been able to solve. What is causing these error(s)? Asterisk boot output: ============== Asterisk CVS-04/10/04-21:44:51, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= [

I'm having trouble getting festival to work with asterisk. We are running debian (sarge) and got asterisk from CVS. Here's what I'm using as far as festival goes. Debian (Sarge) gcc version 3.3.4 (Debian 1:3.3.4-3) Connected to Asterisk CVS-HEAD-07/28/04-21:08:19 festival-1.4.3-release.tar.gz speech-tools_1.2.3.orig.tar.gz I got patches for both of these. Speech tools

I'm replacing a Merlin for a client and they have a PagePal Intercom that I would like to reuse. Here is what I know about it: It has a screw-down wires that goto rj-11 (This was told to me over the phone) that went into one of the Merlin ports. I tried bring it up with fxo_ks and fxo_ls (assuming it was analog and autoanswered) but no luck. I would be happy to replace if anyone knows of

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm testing a telephone connected to FXS port of a Sangoma A200 card. But I'm observing that callerid is not working. The configuration that I'm using in chan_dahdi.conf is the following one: - --------------------------------------------------------------------- ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

Hi asterisk users, I have a inssue with incoming calls with wcfxo card, while receiving a call, I?ve configured my dialplan to forward the call to all mi home voip extensions and that works just fine, but while in the call, after a few seconds, the pbx starts the simple switch once more and keeps ringing the voip extensions log as follows:

I just purchased a T100p from digium and a Carrier Access Access Bank 1 channel bank (12fxs/12fxo). I have the setup partially working thanks to some help from IRC. However I still have the following issues I can't seem to resolve 1. When calling into the system from the PSTN call hangup is not detected. * leaves line in use until it is shutdown. 2. When calling an analog phone connected to

Since e164.org added DNC and ADDRESS records my enum configuration has failed. Using both the old EnumLookup app and the new ENUMLOOKUP function, the lookups have consistantly failed since e164.org added E2U+ADDRESS and E2U+DNC records. Mar 6 17:39:44 WARNING[14222]: enum.c:235 parse_naptr: NAPTR Regex match failed. Mar 6 17:39:44 WARNING[14222]: enum.c:354 enum_callback: Failed to parse naptr

I have two X100P cards that were working just fine for months. When I run modprobe wcfxo today I got the following error: ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.19/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.19/misc/wcfxo.o: insmod wcfxo failed The output of dmesg said that wcfxo:Out of space to write register 06 with e0. What?s

I can either get the TE100P working or the 3 X100P clones working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel

Hi list First of all could you please explain loop-start and ground-start for me? What are they used for? Next, I have the following configurations: dahdi-channels.conf : context=pstn-channels signalling=fxs_ks channel=>130 context=phone-channels signalling=fxo_ks channel=>127 chan_dahdi.conf : [channels] cidsignalling=dtmf cidstart=dtmf signalling=fxo_ls pulsedial=no

I am trying to configure a channel bank with 24 ports of FXS., but appear to be hitting a roadblock? This worked on v1.4.xx but now just get "SimpleSwitch" and immediate=no/yes don't seem to make a difference?, no matter if under top section, under channel, etc. Chan_dahdi.conf: [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

So I took a chance with an X100P knock-off on eBay. I'm running Asterisk + FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel 2.6.16.16. Everything has been fine up until now. I compile the 1.2.5 Zaptel drivers without a problem, get the udev configuration in, modprobe zaptel, and finally modprobe wcfxo. At this point, I get the message: ZT_CHANCONFIG failed on channel

[root@server ~]# modprobe zaptel [root@server ~]# modprobe wcfxo ZT_CHANCONFIG failed on channel 1: No such device or address (6) FATAL: Error running install command for wcfxo [root@server ~]# ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address

Hi, I have already installed the X100P drivers but when I make to make call call, I always get No channel type registered for 'Zap'. Any idea how to solve this problem? It seems that the Zap module is not loaded but I have already load the driver by modprobe zaptel > modprobe wcfxo > ztcfg -vv thanks -------------- next part -------------- An HTML

Dear List members, After succesfully installing the * on a couple of systems, and putting them on test, I observed that there is an intermittent call drop on PSTN line. The systems are - Dell Optiplex P3/500MHz/128MB - Built-in ethernet - 1 X100P (Motorolla chip) card on PCI - 10G HDD etc. - Asterisk April 17 CVS. - 2 Mediatrix FXS ATA (4 phones) - 2 Grandstream phones. - sip.conf, zaptel.comnf