similar to: sip register and nat

I have a SIP connection to Broadvoice and sometimes when I make outgoing calls from a SIP ATA-188 (could be the same number) (the ATA-188, is currently the only extension), there is no audio passed for 5-10 secs. I have set all the codec the same to 711u and also ensured canreinvite is set to no. Any suggestions? Places to look for? -------------- next part -------------- An HTML

Hello - I've been using Broadvoice with Asterisk for a couple of months with no issues. Today, it has stopped registering. The Sip Debug from CLI is below. It tries to register five times and then gives up. Any suggestions? As you might suspect, I have not been able to get Broadvoice on the phone and usually get cut off after being on hold about 5 minutes. Strategic portions of IP

Where does the date/time stamp from Caller ID come from? On my extensions ATA188 and IAX2 soft phone the caller id date / time is 12/30 12:00AM. The Linux time is correct. SayUnixTime return the correct time. Any Ideas? Does this work? Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

I just signed up for Broadvoice, and used a similar network configuration that I have on stanaphone, voipjet, and others. My asterisk box is behind a vanilla Linux masquerade (netfilter/ipchains) firewall. The SIP and IAX services have been working fine in both directions for the other SIP termination services. The Broadvoice inbound service worked immediately. (which to me is odd, inbound

Hi, I'm running Asterisk 1.8.11.1 @office. The Broadvoice service work fine with all 1.6 version and early 1.8 behind a NAT but about 2 months ago stop working. No made changes in the firewall NAT rules. Right now I'm @home via my Xlite softphone working fine without problems Any suggestions or thoughts? Alex Celi This is the info central*CLI> sip show peers Name/username

HELP! Ok, so I have the following SIP.CONF: [general] context=default port=5060 bindaddr=10.1.1.200 externip = XX.XXX.XX.XX localnet=10.0.0.0/255.0.0.0 disallow=all allow=ulaw allow=g729 allow=g726 allow=alaw register => ##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234 [sip.broadvoice.com] type=peer host=sip.broadvoice.com fromdomain=sip.broadvoice.com

Hi all, We seem to be having an interesting issue maintaining our registrations with Broadvoice. It seems to be related to the fact that Asterisk does not normally include authentication with its first REGISTER attempt. Normally, Broadvoice doesn't care, responds with a 401 Proxy Auth Required, and asterisk answers accordingly. However, if the account is already registered, Broadvoice

I have tried to replace these lines from ipchains to work with shorewall. # /NFS requires 111/tcp (sunrpc/portmapper) and *all* UDP ports./ # ipchains -A input -p tcp -s $SUBNET -i eth0 -d 0/0 111 -j ACCEPT ipchains -A input -p udp -s $SUBNET -i eth0 -d 0/0 -j ACCEPT # /These ports are required by bootp, tftpd, and PXE./ # /There are also a handful of udp ports that need to/ # /be open,

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

Hello Folks- Pretty new to the list here, got a lot of reading to do.. Does anyone know where I can find a decent HOWTO or set of instructions for running Asterisk and SIP clients thru firewall/NAT systems? I have a Asterisk box sitting behind a linux firewall at a remote location and have the 5060 and etc ports open as well at 16381-16391 UDP open and routed to the Asterisk box as well. I have

I've tried everything with the * box after this weekend. I have read every document on the problems people are having with them after this weekend as well, but none of them address my problem. I checked my settings in my sips which I have below as well, I have changed the host file a few times, but this was new to me and I never had modified it before. I have and the same results

Hello, Have a weird problem when using asterisk (1.0.6). There are certain numbers I cannot dial when using asterisk with my broadvoice account. No problems with inbound. With outbound calls, I can call some numbers (for example broadvoice customer support number) and unsuccessfully with some. However, when I configure my account directly on x-lite, I dont see these outbound problems. Here is a

Hi all, I've been trying to use BroadVoice as a SIP service provider. They don't officially support * but are helpful when it comes to answering questions for setup parameters. They claim they have no firewalls or access lists that need to be set up so I can get access to their servers. However, something's still not quite right when I use the parameters. It looks like our Asterisk

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

Hello, Please forgive me if I'm repeating this post. I have searched and looked for similar problem with a solution but have not see a similar one. My outgoing SIP and other channels work fine but the incoming/inbound SIP call goes straight to Broadvoice voicemail. I see that Broadvoice is registered when I look at the SIP registry. I have turned on SIP Debug and it is below. Anyone know

Hello all, When I call the Broadvoice number all is good. When I try to call out through DISA on my broadvoice line i get the following: Executing Dial("SIP/147.135.0.129-0815bc60", "SIP/16037862111@proxy.bos.broadvoice.com|30") in new stack -- Called 16037862111@proxy.bos.broadvoice.com -- Got SIP response 480 "Temporarily Not Available" back from

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Hello, I have asterisk setup with Broadvoice. It works great as PBX and Outgoing calling server for all local clients withing 192.168.1.0 network. My asterisk is running over NAT. I use linksys router. Now, I am trying to connect from outside to my asterisk server. I use Diax as iax client. For some reason I cannot connect to my server from outside. On my router I forward those ports to my

Is the Broadvoice service up? I just signed up with them and started receiving calls in no time but could not make calls. And after a few minutes I cannot even place calls. register => [number]:[password]@sip.broadvoice.com [broadvoice] type=peer fromuser=[number] host=proxy.lax.broadvoice.com fromdomain=sip.broadvoice.com context=from-broadvoice dtmfmode=inband any help would be

Hello All, I have 4 Broadvoice lines. If I call any of the lines it shows that is coming from the first line. exaple register=XXXXXXXXX1@sip.broadvoice.com:passwd:XXXXXXXXX1@sip.broadvoice.com register=XXXXXXXXX2@sip.broadvoice.com:passwd:XXXXXXXXX2@sip.broadvoice.com register=XXXXXXXXX3@sip.broadvoice.com:passwd:XXXXXXXXX3@sip.broadvoice.com