similar to: "Caller ID" question

Running the latest * CVS and Cisco 7960G and 7940G phones with SIP 6.3 image. I have figured out how to turn on the DND feature through the Settings>Call Preferences>Do Not Disturb - Yes then Save. This puts the phone into DND On and shows a DND image above the far right soft key which you use to turn off DND. There should be a better way. An on/off toggle of the soft key that it

For the archives... In trying to play GSM files in Windows (Windows XP for me, but in general) I found no help on Google, so when I figured it out I thought I would post it here. Q: How do I play GSM Files in Windows? A: Use Quicktime, it supports the GSM audio format directly. Andy Farnsworth farnsaw@stonedoor.com

During debugging of H323 trunk side (using Jeremy Macnamara's H323 driver in ~/channels/h323) a couple of things come don't quite work as advertised... 1/ the following line in extensions.conf explicitly sets the outgoing caller ID (required in my case for downstream GK processing..) exten => _1NX.,1,SetCallerID,6400047602100 exten => _1NX.,2,Dial,H323/${EXTEN:1} what

Is there a proper and accepted way to go about setting an E164 compliant caller ID (ANI) ? Currently, we're using just the Set(CALLERID(num)=XX) where XX is some E164 compliant number like 3539146632431 or some such. Is there another way we should be doing that or is that proper? N.

I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed "/DEFAULT_CIDRINGS 2"/ Is there something i'm missing ? My Cisco 7960 just shows "asterisk" Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local usecallerid=yes callerid=asreceived

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

As usual, this is most likely a easy question, but here it goes any way: How can I change the caller id on a transferred call so the called party knows the call has been transferred from a colleague and it's not coming directly from our outside lines? The story goes like this: 1) Client calls. All phones ring. 2) Someone picks up the phone. 3) The phone gets transferred to someone. 4) The

Hi folks, I think my little agi script is ready for the big one-oh-oh. Available at http://muware.com/asterisk is cid_rewrite-1.0.0. This agi-script does the following: - Standardize incoming caller-id numbers to adhere to US dialing code; NANPA numbers are reformatted to 1+10, international numbers become 011<country-code><number> (this is customizable with a little PHP knowledge).

Hi there, I have a new asterisk working in New Zeland and everything is working well except when an incoming call to the PSTN hangs up, asterisk wont hang up the zap trunk (X100P). I have found this information: http://bugs.digium.com/bug_view_page.php?bug_id=0001474 Which discusses my problem and i have made sure that i have the latest info in the indications.conf as follows: [general]

Hello everybody! I am having the following problem and since I am a beginner in playing with asterisk, i can't solve it: I am trying to integrate my existing H.323 network in real world telephony by ISDN cards. The problem is that i DON'T want to change all e164 numbers in my h.323 network and my ISDN provider doesn't accept those identities (CIDs). So, i have to spoof the outgoing

I've looked through the archives - and see questions similar to mine, but no answers. What, if anything, can be done to get the incoming Caller ID to be presented on the Budgetone's Caller ID display? In all other respects the phone+Asterisk seem to be extremely happy with each other.

I've got asterisk able to make and receive calls via the Internet via E164 lookups. If I get such a call - I'd like to display the original phone number on my phone. In the log is the following - which displayed '601' on my phone. The caller was +886288097680 - am I getting the wrong ClID because of my end or the caller end?

ENUM lookups at e164.org return a IP route for ALL toll-free numbers. I was surprised to observe that ALL toll-free numbers get a hit at e164.org. It appears that ALL toll-free prefixes have been delegated, thereby publishing an IP route for YOUR TOLL-FREE NUMBERS, my toll-free numbers, and even toll-free numbers that have not been allocated. :-) See below Should I care? Even though this

e164.org is a public name service which provides ENUM.164, a method devised by the IETF and ITU to allow an ordinary telephone to be connected to an Internet type network and provided dialling service from other, regular telephones. Unlike many other "free" voice over IP systems, e164.org allows users who have a regular telephone line, to also hook themselves up to the Internet

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

So I just saw this VoIP-centric article at slashdot (http://slashdot.org/article.pl?sid=04/05/22/1840220) which mentions e164.org. It's a "non-profit public DNS root designed to map phone numbers to Internet protocols." Is anyone on this list actually using this? They have asterisk config instructions: http://www.e164.org/config.php I wonder if someone can help me understand

I have an asterisk box and SIP / IAX2 phones. To call out, users have to add 0 (zero) before a real telephone number. That means, that if they want to call someone that has a number 123456, they have to call 0-123456. Simple, right? This has a serious drawback though - when someone calls us from the number 123456, we see the callerID 123456, and we're unable to use the callback/redial

Hi my name is Will Velez. Does Asterisk support E164? Thanks

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

Hello everyone, I playing around with ENUM and have configured * to query a few sources for testing purposes (fierymoon, e164.arpa, e164.org). I'd like to know if there is a way to query these servers manually (ie outside of asterisk via nslookup or equivalent) to find out if particular exchanges are listed with wildcards, so as to terminate calls to those prefixes (I'm not trying to