similar to: ISDN BRI with National (north america) Signalling

Hi, folks! Sangoma has an informal user survey up on their home page (at http://www.sangoma.com) asking if people would use their A500 card for North American BRI, if it were supported. I encourage anyone with an interest in voice BRI in North America to vote; this information will be used for deciding whether to make the investment in developing a National ISDN driver layer for it. Benefits to

Hi Guys! I got a Diva passive ISDN card and I can't get it work with asterisk 1.4, It is supported in the kernel as an isdn4linux device but I can't find "Modem" channel type when i type in: core show channeltypes. I'm guessing it is removed in asterisk 1.4. Tried with capi interface but it does not work :( Anybody got some idea how can i make it work or got a link to a

Dear all, I'm planning to buying Eicon Diva Server V-BRI for my asterisk server and run with chan_capi. Is anybody using that card ? Would appreciate any feedback. Bartosz

Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking for a CAPI compatible active BRI adapter capable of NT mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses requirements. However, at EUR 1387 for four BRI interfaces, it does not come cheap. Are there other users of similar hardware that can point me to alternatives ?

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log

Which PCIe cards work with North American BRI & Asterisk? Digium & Sangoma don't support it, according to everything I've read (their manuals and their tech support). I think I need National, maybe National 1 or National 2. I already got an NT-1. I'm getting a few ISDN phones to test the circuit. I ordered a Dialogic Diva Diva 4BRI - 8 PCI-E 4 Ports Quad 803-031-02B Gu...

Hello Everyone, I am once again wondering about EICON. I have had no success with the Diva Pro or Diva Pro PCI, so my question is, does anyone use an Eicon Server BRI card on Asterisk? Or would I be better off trying to get a split PRI? Regards, Greg

Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: "call failed: declined". Anyone have experience with this

Hi list, Does chan_capi work with kernel 2.6? The Eicon Diva server card loads fine judging from /var/log/messages but Asterisk gives an error when trying to load the chan_capi module. I'm using chan_capi-0.3.5, zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a msg that may be related and don't know

Hello everyone! I've got a Eicon Diva Server BRI card into my "*" box working just fine, but I wander if there's anything I can do to improve voice quality for my operators. I'm thinking something along the lines of "auto gain" and sudden noise suppression (like when you hit a fax machine or the other party accidently touches the dial pad on the phone). Does

We are experiencing slightly distorted audio with playing of recordings on our Asterisk server when the call comes in over our Eicon Diva Server BRI card. An example is an incoming call to IVR and playing some of the standard Asterisk voice prompts. Note that there is no audio problem with internal access to the same recording. Neither is there a problem with calls not involving the playing of

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

Hello Marc, Could you post the install details for the Diva PCI? I have a Diva Pro PCI 3.0 and I am looking to get it working... I am running Debian Testing. So far it appears there are a few things floating around but I am not certain which direction to go. I know I need to load the firmware first. I did manage to load the modules ok. Thanks, Greg -----Original Message----- From:

Hello everyone, I'm hoping someone can help me with this. I have a business customer in the U.S. (Michigan, AT&T Territory). I need to get 4 trunks into an asterisk Box. My intention is to use an Eicon Diva Server card with 2 BRI Circuits. The reason for this is that the business needs DID's on the trunks (20 of them). A full or fractional PRI is overboard for them, as they will

Hi! I'm trying to enable echo cancelation with my Eicon Diva Server 4 Bri card. I've enabled it from zapata.conf, (as I read from www.voip-info.org) ------------------------------- ; Enable echo cancellation echocancel=64 echocancelwhenbridged=yes echotraining=2000 ---------------------------- but nothing seems to change, echo is still present. Any idea? Should I enable/change something

Hello, I'm thinking of deploying Asterisk. I already have a handful of EICON Diva 2.01 PCI ISDN cards. I was thinking if it's possible to insert 4 such cards to my PC-Asterisk server (which I yet have to install) and use them as 4 lines in case anyone has to call me in / I have to call out using ISDN line(s)? Any reply appreciated. Tomek

Hello everyone, I'm using very simple setup to make and receive external ISDN calls through a softphone (x-lite version 3.0 - Win32) via an asterisk box. Hardware setup: - Dialogic Diva BRI (lspci yields: Network controller: Eicon Technology Corporation DIVA Server BRI-2M/-2F (rev 01)) - ISDN BRI line Software setup: - Redhat 9 - asterisk-1.4.16.2 - chan_capi-1.0.2 Asterisk configuration

asterisk-users-request@lists.digium.com is believed to have said: >chan_capi does not set the NT-mode. Your cards driver need to do that. >E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl >or set NT-mode in the config wizard. >chan_capi does not (need) to know anything about what protocol the card is >doing. CAPI is independent here. Ok.

What types of ISDN BRI cards work well in Europe (Guadeloupe, Martinique and France) ? For example: AVM C2 or AVM C4 or eicon Diva server 4 BRI? Any others? Which driver is appropriate? Ray Burkholder ray@oneunified.net http://www.oneunified.net 704 576 5101 -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. -------------- next part