similar to: chan_capi 0.3.3 compiling error

Hello, I already searched on the mailing list, but I didn't found a solution to my problem. I can't install chan_capi anymore. It has been running very well but then I run into trouble. so I decided to update to the latest CVS version of asterisk and of chan_capi. But now I can't compile chan_capi anymore. I'm running SuSE 9.0 and I think the problem is caused by an update that

I just downloaded chan_capi.0.3.4a.tar.gz but it will not compile on my system (Suse 9.1). I compiled and installed Asterisk and it is running, did I miss a configuration or dependency for Chan_Capi somewhere ? cheers, Mike linux:/usr/src/chan_capi-0.3.4a # make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES

Hi there, the subject says it all... I get the following error messages: ---- mmielke@pbx:~/chan_capi-0.3.5> make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO -c -o chan_capi.o chan_capi.c

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io

Hi, I am trying to install chan_capi, with asterisk (cvs) on Suse 9.0, but I get the following error: ====== linux:/usr/src/chan_capi-0.3.1 # make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include/asterisk -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN -DDEFLECT_ON_CIRCUITBUSY -DCAPI_SYNC -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO

Hi I use RH 9 + asterisk v1.0 stable + 2 PCI fritz cards + chan_capi 3.5 and it works fine, Since my users want fax fonctionnality and customers know 1 of the msm as fax number I wanted to try the chan_capi-0.3.5 patch if I patch chan_capi and run make, I get an error message , as you can read below, orginal chan_capi compile works, when patched I get an error, no CID ? Any idea ? anybody

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misdn

I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch of errors. (By the way, can I use chan_capi for ISDN card with winbond w6692cf chipset?) I'm not a linux expert, still :-) Before compiling, when I type "modprobe capi" to load capi module, and then "lsmod", i get list of modules: capi 6208 0 kernelcapi 30496 1

Hi all, i'm tryinf to install chan_capi but i get this error root@obelix:/usr/src/chan_capi-0.3.5# make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i586 -DNEVER_EVER_EARLY_B3_CONNECTS -DCAPI_ES -DCAPI_GAIN -DDEFLECT_ON_CIRCUITBUSY -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

When I saw the update for Cisco Phone RTP issue I thought I would try it. Unfortunately chan_capi wont compile on this update. Can anyone recommend a good * release for Capi, Bri ISDN and Cisco 7940's SIP 6.3. Or will CHAN_CAPI also be updated ? Running Eicon Diva Bri Cards. Error: chan_capi.c:1187: too many arguments to function 'ast_dsp_process'

Just tried compiling chan_capi 0.3.4 under CVS Head and get the following errors. chan_capi.c:60: `__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__' undeclared here (not in a function) chan_capi.c:61: `__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__' undeclared here (not in a function) chan_capi.c:62:

Could someone please comment on the current state of chan_capi, chan_misdn and chan_modem channel drivers in terms of functionality and stability. Specifically, which channel driver would be best for a passive PCI HFC or W6692 ISDN card. The chan_misdn wiki claims that chan_capi distinguishes between junghanns and non-junghans cards, and that chan_misdn is better suited for general misdn

I am trying to compile chan_capi 3.3.4a, but I end up with lots of gibberish. Near the top it states that capi20.h doesn't exist. Searching for the file, several show up: # find / -name capi20.h -print /usr/src/linux-2.4.21-144/include/config/isdn/capi/capi20.h /usr/src/linux-2.4.21-231-include/smp/include/config/isdn/capi/capi20.h

I did the following: - chan_capi-0.3.5/Makefile: uncommented CFLAGS+=-DDEFLECT_ON_CIRCUITBUSY - recompile asterisk + chan_capi - added /etc/asterisk/capi.conf: deflect=0800123456 ; some 0800 test number - in etc/asterisk/extensions.conf under [tcom-in]: exten => 98765,1,capiCD(0800123456) - made both b channels busy by outcalling on both lines (ISND BRI) - called my msn (98765) by mobile

I've got a brand new Eicon Diva Server BRI card and I want to configure it with Asterisk. I managed to get asterisk and zaptel to compile and install, I've compiled and installed the drivers for the Diva card and now I need to compile and install the chan_driver for chan_capi. Unfortunately this fails miserably. I get the following messages: I'm using: Kernel 2.6.16.37.4,

Hi, I have a problem for install chan_capi My pc: Suse 9.1, with asterisk current stable en cvs I have download http://www.junghanns.net/asterisk/downloads/chan_capi.0.3.5.tar.gz And the path from http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2 And patch the chan_capi # cd chan_capi-0.3.5 # patch -p1 < chan_capi-0.3.5-patch.diff # make /for install My error

Hi, I'm trying to make work chan_capi with last asterisk CVS. I installed last zaptel,libpri,last cvs ana patched chan_capi 0.35 with the patch kindly suggested me by Jason Williams: http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2 First I received error 127 that I resolved commenting the line CC=gcc-2.95 but now I have this error: chan_capi.c: In function `load_module':

Hi all, I?m using * with a Suse 8.1 (kernel 2.4.19-4GB). My hardware are a Eicon Diva 2.01 PCI and a Eicon Diva Server 4BRI; I have installed the drivers wich came with the distribution using the distro installer (yast2). I?m experiencing problems with outgoing calls so I?ll try with chan_capi instead of chan_modem. The point is that I?m having problems with the compilation:

hello, sometimes my capi_channel stop works - e.g. when i try to call number which does not exist ( typo error ) and i must restart asterisk. following lines appears in the log files : ERROR[393234]: File chan_capi.c, Line 1050 (capi_request): no free channel on controller 1! will continue searching. ERROR[393234]: File chan_capi.c, Line 1050 (capi_request): no free b channel on controller 1!