similar to: BroadVoice usage?

Today, We have added INVITE Authentication. This seems to bring a large amount of problems to people in the way since they can't make outbound calls. Here's what needs to be done. You need to add three variables to your peers or friends, username, authuser, and secret. username=<phonenumber> authuser=<phonenumber> secret=<registration password> Dan

HELP! Ok, so I have the following SIP.CONF: [general] context=default port=5060 bindaddr=10.1.1.200 externip = XX.XXX.XX.XX localnet=10.0.0.0/255.0.0.0 disallow=all allow=ulaw allow=g729 allow=g726 allow=alaw register => ##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234 [sip.broadvoice.com] type=peer host=sip.broadvoice.com fromdomain=sip.broadvoice.com

I did a quick google search of the lists site and couldn't find a definitive answer, so if it's there, I apologize for asking again. Starting about noon yesterday, I am no longer able to send/receive calls via Broadvoice. When calling in, I get a fast busy, and when calling out I get the following error: -- Executing Dial("SIP/112-572a",

I have searched the list and cannot find a sip 400 solution posted that solves my problem. If anyone has any thoughts or suggestions on the following I would greatly appreciate it. I didn't have this error before Broadvoice made their changes this weekend. Now when I make a call it connects but, I cannot hear anything on the other end... The full message I have is: 8 headers, 0 lines

I just signed up for the BroadVoice service a few hours ago, but for the life of me I can't get any incoming voice. The incoming connection is fine as it rings my extension from outside, but I can't hear anyone talking. Outgoing voice is working fine though. I've been looking through the archives, but I haven't found a solution to the problem yet. I even tried another router

I understand there has been some issues sending DTMF tone through Broadvoice. Can some provide me with symptoms? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.700 / Virus Database: 457 - Release Date: 6/6/2004

We are trying to determine how to build out an IVR system we are working on. The system needs to be able to handle probably at most 5-10 concurrent calls at peak times. Other times we are just looking for a reliable service. For incoming calls we've been using BroadVoice VOIP and before that VoicePulse VOIP. VoicePulse's IAX service started dropping DTMF inputs that we were processing

I set up an asterisk box with a broadvoice sip connection for incoming connections it works great when I use a cell phone, vonage line, calling card to call the asterisk box, but when I try to call it from our verizon land line it is busy and asterisk logs do not show incoming call. Any ideas on what the issue is? Thanks! Randy

They say on their website that they allow you to use your own device provided you give them the MAC address. Has anyone tried using * with it? Looks like they have quite a few rate centers and also phone support... Their website is horrible though... Just wondering, it'd be good to get user experiences from different providers other than IconnectHere and BroadVoice... -Chris

Is anyone signed up with Vonage and using an asterisks box?? Also what VOIP providers would anyone recommend? -- James Moran Potential Technologies http://www.potentialtech.com

Hi, We've been using Broadvoice with * for several months, mostly successfully. However, sometime last weekend (Sat, Dec 4 - Mon, Dec 6), BV seems to have stopped passing DTMF on incoming calls. We've not made any changes to the * system during this time. We even switched to using their DC server instead of the usual LA server, with no effect on the problem. We have applied the

Hello all, When I call the Broadvoice number all is good. When I try to call out through DISA on my broadvoice line i get the following: Executing Dial("SIP/147.135.0.129-0815bc60", "SIP/16037862111@proxy.bos.broadvoice.com|30") in new stack -- Called 16037862111@proxy.bos.broadvoice.com -- Got SIP response 480 "Temporarily Not Available" back from

Hi all, I am trying to configure my Asterisk PBX to connect to a broadvoice account. I want incoming calls to go to the "s" extension and to ultimately have outbound calls routed through my broadvoice account(s). I cannot for the life of me get this to register correctly. I am currently receiving this message on the console: Failed to authenticate on Register to

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

Egad, not again with Broadvoice! Anyhow, I recently installed AAH and configured my TDM11B and got that and some SIP phones working. I still have some issues to work out, etc, but my current problem is Broadvoice. I have checked out all of the online resources, including the recent list exchange about the recent changes made by Broadvoice. However, the one thing I have found to be consitent in

Is anyone else experiencing 404 errors on outbound dial with Broadvoice? I've followed the instructions posted by Broadvoice to configure sip.conf, and inbound calling works fine. Every time I try to dial out, I get a 404 "Not Found" error. Here are the relevant sections from my configs. sip.conf: context=broadvoice-in register =>

Hi list, I'm in central-europe and signed yesterday a broadvoice account. My Asterisk box is CVS 2005-08-25. Problem I face is: "Failed to authenticate on REGISTER to 'phonenumber@sip.broadvoice.com' (Tries 2)" then "Registration for 'phonenumber@sip.broadvoice.com' timed out" and finaly "Giving up forever to register

All, I have been fighting with my dialplan for hours now, and google searches talk lots but offer nothing in terms of explication for this. I have my SIP peer set up and working with Broadvoice: [sip.broadvoice.com] type=peer user=phone host=sip.broadvoice.com fromdomain=sip.broadvoice.com fromuser=5555551234 secret=password defaultuser=5555551234 insecure=port,invite context=broadvoice

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

Hello, Have a weird problem when using asterisk (1.0.6). There are certain numbers I cannot dial when using asterisk with my broadvoice account. No problems with inbound. With outbound calls, I can call some numbers (for example broadvoice customer support number) and unsuccessfully with some. However, when I configure my account directly on x-lite, I dont see these outbound problems. Here is a