similar to: Asterisk and Zaptel for 2.6 kernel

Hi Everybody Any significant changes to CVS HEAD over the last couple of days. I've got two asterisk boxes - both on public IP but one is dynamic. The one on dynamic IP registers at the other one - that part is fine. Calls going from the one with dynamic to the static one goes fine. Call the other way results now in: Failed to authenticate user "1101"

Hello folks, i upgraded to the actual CVS head from yesterday (27.5.) but can not get incoming SIP calls from my provider (sipgate). If someone calls my number, my asterisk responds with the following error: May 27 21:30:21 NOTICE[1114606512]: chan_sip.c:6351 handle_request: Failed to authenticate user "<CallerID>" <sip:<CallerID>@217.10.66.11>;tag=as38e9693c I

Hello, I just noticed an error in the current version of Klaus-Peter Junghanns bristuff package, especially in the HFC module. Everytime I try to unload the HFC module with "modprobe -r" I got a kernel panic and the complete server hangs up so I need to do a hard reset. Regards, Julian Pawlowski

Hello! Please, help me, I''m totally lost choosing basic budget server for XEN. The variants are Sun (X2200 M2 or Sun X2250 M2) or maybe HP Proliant DL160 G5p. Or maybe some IBM server? Which X2200 configuration will perform better, two Opteron dual-core 22xx or single quad-core 23xx? Which one performing better nowadays, Opteron or Xeon? I know that 2-3 years ago Opteron was the

Hello, I would like to use my existing HST Saphir V S2M PCI with Asterisk. Unfortunately I could not find any information about the usage with Asterisk. Does someone know if it's possible to use it? Do I need to do something special? Regards Julian Pawlowski

> I'd like to create the following: a user picks up the phone > (gets a dial tone), dials '0' for an 'outside' line, gets a > second (different?) dialtone, and is able to enter an > external phone number. Klaus-Peter Junghanns has something like this on his page: http://83.137.99.170/jn/relaunch/asterisk/page19.html It didn't work for me correctly so I

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

I was just wondering if someone has experiences to use Asterisk in an existing Ericsson MD110 environment. Particulary I'd like to know if it is possible to use the MD110's system phones directly connected to Asterisk. I'm not very familiar with it but would it be possible to use ADSI with these phones? Are they more like analog or more like digital phones or is the protocol even more

Hi - Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time. System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below: Is there anything magic about Portuguese ISDN? The PCI bus in the

Hi there! I just try to play with die wake-up function described in http://www.voip-info.org/wiki-Asterisk+tips+wake-up Everything looks fine but there seem to be missing some soundfiles like "wakeup-menu". Where can I get these files in order to make this feature usable? Regards Julian Pawlowski

Hi there, I just finished work on my current PBX dialplan configuration. I didn't find anything compareable yet so I think it might be interesting for someone else too. Short overview: - seperation of the numbers in blocks (just definded) - error/cause handling - advanced access control (even vor ISDN Zap clients) - access levels - denylist with national number blocks (for Germany) -

Hi guys! I just try to compile Asterisk with "make all" and get the following lines multible times: cli.c:31:19: build.h: No such file or directory dlfcn.c:40:25: mach-o/dyld.h: No such file or directory dlfcn.c:41:26: mach-o/nlist.h: No such file or directory dlfcn.c:42:28: mach-o/getsect.h: No such file or directory Can someone tell me what's exactly missing?

Hi, I was wondering if anyone has had good experiences using R on Linux with dual AMD64 (Opteron) processors. I'm thinking of buying a couple of such servers, but I'd like to make sure R would work fine. The "R Installation and Administration" guide notes that there may be some problems with BLAS libraries. That's all I could find about R on AMD64. Please share your

hi all, i have a probably very stupid question/problem. for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP

Hi, I was asked to create a Queue which instead of playing MoH it generates the ringing tone. I had a look around but could find anything, I would welcome and help. Regards Mateusz

I am getting the "Segmentation fault" when using hclust in R-1.9.1 running under SuSe 9.0 64-bit kernel on a dual opteron system with 8G of RAM. I was wandering if anybody could offer any insight? Thanks, mario.

Full_Name: Dr. Hans A. Kestler Version: 1.8.1. OS: Linux, Win, Mac OSX Submission from: (NULL) (134.60.73.116) The code below produces after a different number of iterations i the following error: Error in optim(par = rep(0.5, length(edges)), loglik, method = "L-BFGS-B", : non-finite value supplied by optim This was reproducible on different machines (Mac G4 OSX, AMD Opteron

Hi there, linux got so many distro, but which one that have more compability with the Asterisk? Regards, Freddys

Hi, we are setting a 120-channel conference server and would like to learn if someone already did this (hardware, problems, etc...) Best regards, PauloHM

Hi, I am planning to buy a new PC for computing simulations in R under Linux. I was searching the web/mailing list-archives for useful hints about the "optimal" choice of hardware - surprisingly I found no recent topics. As far as I know, R doesn't use threads, so I think that there should be no benefit in choosing a dual-processor machine. So the remaining affordable choices