similar to: Advanced access control and cause handling

Hi - Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time. System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below: Is there anything magic about Portuguese ISDN? The PCI bus in the

Hi Folks, just updated my current Dialplan available on http://capi4linux.thepenguin.de/download/asterisk/config/ It now heavily uses ODBC database (MySQL) to hold most of the data like extensions and incoming connection numbers. An example databasefile is also included. The denylist has also been updated for future and current settings of the german telecom regulator. Again I added many

I've got Zaphfc working running Asterisk v. 0.7.2 Then I have tried with Asterisk V. 1.0 and the latest from CVS - with no succes. Has anybody got zaphfc working with newer version than 0.7.2 ? NR -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040616/32481fca/attachment.htm

Hi folks, I just wanted to use Klaus-Peter Junghanns' great bri-stuf to work with the actual cvs head (26.05.2004). You can download my modified patched version of it under http://capi4linux.thepenguin.de/download/asterisk/ I think it works fine at the moment but I'm not sure if it's all perfect *g* ;-) Regards, Julian Pawlowski

> The bristuff distribution comes with a install.sh script > (./install.sh) > which downloads, compiles the required software on your system. > > If you want to do it manually, look into download.sh to see the exact > cvs checkout options which downloads the required asterisk and libpri > versions. Yes, I know which libpri/asterisk versions bristuff downloads when using

Hello, I just noticed an error in the current version of Klaus-Peter Junghanns bristuff package, especially in the HFC module. Everytime I try to unload the HFC module with "modprobe -r" I got a kernel panic and the complete server hangs up so I need to do a hard reset. Regards, Julian Pawlowski

Hello folks, i upgraded to the actual CVS head from yesterday (27.5.) but can not get incoming SIP calls from my provider (sipgate). If someone calls my number, my asterisk responds with the following error: May 27 21:30:21 NOTICE[1114606512]: chan_sip.c:6351 handle_request: Failed to authenticate user "<CallerID>" <sip:<CallerID>@217.10.66.11>;tag=as38e9693c I

Hello, I've been using * for quite a while using AVM C4 card and a few Grandstream Budgetone 102 hard phones plus couple of HandyTone 286. Echo is a big problem. I am getting used to it, but some users complain. Anyone has experience w/ regards to echo comparing the AVM C4 with two HFC-cards? Before shelling out time and money, maybe someone else already has done so, and could tell me if

I'm having issues with compiling libvirt on OSX 10.12  ~/Development/github/libvirt/ [master] make /Library/Developer/CommandLineTools/usr/bin/make all-recursive Making all in . Making all in gnulib/lib /Library/Developer/CommandLineTools/usr/bin/make all-am make[3]: Nothing to be done for `all-am'. Making all in include/libvirt make[2]: Nothing to be done for `all'. Making all in

> I'd like to create the following: a user picks up the phone > (gets a dial tone), dials '0' for an 'outside' line, gets a > second (different?) dialtone, and is able to enter an > external phone number. Klaus-Peter Junghanns has something like this on his page: http://83.137.99.170/jn/relaunch/asterisk/page19.html It didn't work for me correctly so I

Hi all, I've run into an issue we have with dovecot versions 2.0.12 through 2.0.14 on latest CentOS 6.2 when dealing with Maildirs located on NFS partitions. Although I saw Mr. Egbert's thread, his resolution does not work on our end. When dealing with users with over 500 messages in any of their Maildir folders, they occasionally receive an error from the server: Internal error

I was just wondering if someone has experiences to use Asterisk in an existing Ericsson MD110 environment. Particulary I'd like to know if it is possible to use the MD110's system phones directly connected to Asterisk. I'm not very familiar with it but would it be possible to use ADSI with these phones? Are they more like analog or more like digital phones or is the protocol even more

Something I noticed on a 2.1.7 director test cluster (two directors, three backends): 'doveadm proxy kick user' will kick all connections for that user on that director only. Any additional connections on other directors will remain active unless the command is run on all directors. Are the proxy and director sub-commands intended to be separate and distinct in their operation? If so,

Try using the dlls from windows 95 cd, I'm not talking about the dcom95 dlls, but the dlls win95 installs in c:windows/system. > > > puoti@inwind.it wrote: > > Did you use only win95 dlls? If you used dlls from any other version of > > win, htere could be problems with dcom 95. > I used dll's only from dcom95 which are listed at appdb.winehq.org > > Without

Hi, I have a strange problem, after some time my asterisk server starts using more and more CPU resource and after some time it becomes unusable. I need to kill the asterisk process before it renders the whole system unusable. I have a few SIP phones, IAX trunk to other system and voicemail running on that server. Now, how do I troubleshoot, which part of asterisk is causing the load on CPU ?

Hello, I would like to use my existing HST Saphir V S2M PCI with Asterisk. Unfortunately I could not find any information about the usage with Asterisk. Does someone know if it's possible to use it? Do I need to do something special? Regards Julian Pawlowski

Hi there! I just try to play with die wake-up function described in http://www.voip-info.org/wiki-Asterisk+tips+wake-up Everything looks fine but there seem to be missing some soundfiles like "wakeup-menu". Where can I get these files in order to make this feature usable? Regards Julian Pawlowski

All, I have been trying to get CAPI4Linux working on my machine and being frank am failing miserably! I am looking for any help available, I am real newbie (so please be gentle) and choose to run Mandrake 9.2 as it appears quite friendly (or so I thought!). I have been following the guidance found at http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI for the AVM card (actually I

HEY, I have started a Centralized Deny List. If you wish to help out and contribute just send your deny list to denylist@acnsnet.com Am working on cron job now for automatic update of list. Also the url for the list is http://www.acnsnet.com/~denylist Will also be having a zipped and tarball archive of the list. Chuck ============================================== Charles Williams (Owner)

Hi Everybody Any significant changes to CVS HEAD over the last couple of days. I've got two asterisk boxes - both on public IP but one is dynamic. The one on dynamic IP registers at the other one - that part is fine. Calls going from the one with dynamic to the static one goes fine. Call the other way results now in: Failed to authenticate user "1101"