similar to: MSN selection when dialout ISDN (ttyI* modem -interface, NOT CAPI)

Hi, I've got a big problem. I have 2 ISDN cards windbond I can make calls from sip phones on ISDN lines but only from one card channel B1 to isdn phone, and what ever ttyI* I choose only one of cards is choosen. How to bind /dev/ttyI to another ISDN card? Kind Regards, C. ---------------------------------------------------- Premiera filmu na DVD o ?yciu intryguj?cej Marleny Dietrich.

Hi, I am having some trouble with ISDN Dialout. Using a Netjet-s PCI Card. When in Minicom, the only way I can dialout is if i issue ATS18=1 First. Otherwise I get a BUSY message. So thats fine. But when I dialout from asterisk, I get an immediate hangup, so my guess is that asterisk is not issuing ATS18=1 to the ttyI device. Here are my configs, any input would be greatly appriciated.

Hi, i install the Asterisk PBX on a linux machine with i4l to connect to PSTN (EuroISDN). And i configure a very simple dial plan in extension.conf. After this, i connect with a SIP program to asterisk and would call my cellular phone, but got this error: -- Executing Ringing("SIP/ACzerniak-0904", "") in new stack -- Executing Dial("SIP/ACzerniak-0904",

Hi all, I compiled/installed chan_capi.so without problems. When I launch Asterisk, I get the following error: --- [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif: ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0 Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338

hi, klaus Console output: *CLI> -- Registered SIP '' at 192.168.16.114 port 12410 expires 1200 -- Executing Goto("SIP/ola-5a9c", "capiring|BYEXTENSION|1") in new stack -- Goto (capiring,81520400,1) -- Executing Dial("SIP/ola-5a9c", "CAPI/22545079:bBYEXTENSION|120|Ttr") in new stack == data = 22545079:b81520400 == capi request

Hi all, I have installed a test machine with asterisk in order to try it. I have a problem with capi channel (chan_capi 0.3.4a). When an external call directed to an internal Ip phone is not answered I obtain this warning repeated many times: .... .... Jul 12 16:13:43 WARNING[1209214400]: app_dial.c:302 wait_for_answer: Unable to forward frame Jul 12 16:13:43 WARNING[1209214400]: app_dial.c:302

Hi there, I searched in mailinglist and in web, but no answer to my problem... Only this post with no answers: http://lists.digium.com/pipermail/asterisk-users/2004-March/038994.html I'm using CVS Asterisk (05/17/04) with chan_capi 0.3.1. (multiple controller support). In my Asterisk-box there are 2 Fritzcards (module for second card compiled with changes on sourcecode found in the web).

hi when two calls are active on controller 2, chan_capi won't use controller 1. this is with AVM C2 roy -- Executing Goto("SIP/torgeir-b476", "capiring|BYEXTENSION|1") in new stack -- Goto (capiring,90044875,1) -- Executing Dial("SIP/torgeir-b476", "CAPI/22545066:bBYEXTENSION|120|Ttr") in new stack == data = 22545066:b90044875 ==

Hi all, i 've written a little Callgen script for generating calls through the outgoing spool directory. The calls goes over 8 ttyI devices to another pbx and come in through other 8 ttyI devices. But when i generate the calls, sometimes * register the calls but never initiate them. Especially when the files come to fast into the outgoing dir. What can be wrong ? Is it possible that the

I haven't managed to work this one out yet, so any assistance appreciated ... We want to be able to set the outgoing caller-id on, BRI according to the extension but haven't worked how with asterisk ? we have several hundred inbound numbers on these BRI so we are able o use any one these to sett on outdial. One other point I have been told should work, bu have no way of trying... In

Kudos to the CAPI developers. I would like to have multiple MSN's on my ISDN Bri lines. I see all the cool features but cannot find any examples or guides to build from. Currently running Diva Eicon Cards with CAPI from http://www.junghanns.net <http://www.junghanns.net/> I would like to route calls to sip phones via msn. Set up callgroups etc. Can anyone share

Hi, I can't make outgoing calls with CAPI (passive ISDN Fritz card). See Asterisk error below. Incoming calls and SIP to SIP calls do work. It looks like a msn mismatch in extensions.conf and capi.conf, but I can't find it. Can anyone help me find the problem? Thanks, Rob *CLI> -- Executing Dial("SIP/8112-1be9", "CAPI/356666666:BYEXTENSION") in new stack

Hi, I'm integrating Asterisk to legacy PBX via ISDN router. If I want to call legacy PBX internal extension I need to specify MSN as caller id and local number to call. I wonder if I can cal out via Fritz & CAPI on any msn I want, or are there any limitations - I've read something about 5 MSNs limitation and wonder if it still holds ? Thanks in advance, regards, Rob.

Hi all, I am trying to get Capi Dial to use a specific outgoing msn. I can't get it to work. If I make a test call to 0703241494 (same isdn line, just one of the other numbers) I don't get CLID at all. Any ideas? ; use 0703241432 as outgoing msn exten => _070.,1,Dial(CAPI/@0703241432:${EXTEN}|30|r) in capi.conf I have: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8

Hi, I'm currently using chan_capi-cm-0.6, with the following capi.conf: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 language=de [ISDN1] msn=8304490 incomingmsn=8304490 isdnmode=msn group=1 controller=1 softdtmf=1 context=demo echosquelch=1 echocancel=yes echotail=64 callgroup=1 devices=2 Each user has a different numer, e.g. 83044910, 83044911, 83044912 and so

Hello, i have asterisk with 2 internal isdn cards - handled by isdn4linux and i need to setup whol system like this route some call beggins with 0 or 00 - long distance through first card, route calls to mobile network via second card ( tehere is isdn gsm gateway connected).how i can do this using only isdn4linux (/dev/ttyi) ? regards Marian -- SUNTEQ s. r. o. Bojnicka cesta 35 # Prievidza

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i'm in debian sid 3.1 with kernel 2.6.7, * last cvs & chan_capi 0.3.4b; nt1+ with 2 bri in ptmp (http://www.voip-info.org/tiki-index.php?page=DDI) i tried to install avm c4 following step by step http://www.voip-info.org/tiki-index.php?page=Asterisk%20How%20to%20connect%20with%20CAPI step 1. i compiled capi 2.0 support in kernel

Hi, For the project I've used the Eicon DIVA card. It has 8 BRI ports, and for about 25% of the time there are 7 or 8 in use. So we want to replace it with an E1 card. Only issue is, replace it with what? The idea we have been playing with was to get a Digium E1 card (we already have bought lot of Quad E1 cards :-) and then just put it back to back against Asterisk server. And instead of

Hi! I need to run ols regressions with Huber-White sandwich estimators and the correponding standard errors, without an intercept. What I'm trying to do is create an ols object and then use the robcov() function, on the order of: f <- ols(depvar ~ ind1 + ind2, x=TRUE) robcov(f) However, when I go f <- ols(depvar ~ ind1 + ind2 -1, x=TRUE) I get the following error: Error in

Dear friends, In S-PLUS, we can use the following argument, but not in R. mode12 <- gam(score1 ~ lo(latitude) + lo(longitude)) I searched the help in S-PLUS, it says lo() Allows the user to specify a Loess fit in a GAM formula, but i didn't find the correponding function in R. Anybody knows how to do the similar task in R? Thanks very much. -- With Kind Regards, oooO:::::::::