similar to: Zhone Zplex issues

I've got a Wildcard T100P along with a Zhone Zplex 10 24S/O which has been working fine for me now for a while. These have been pulled out of a working Asterisk installation (as they were no longer required) to use at home only to find that the fan noise is too loud. As such I'm looking to sell off this hardware and replace it with some combination of fanless hardware that will allow me to

Mine has been working well, but the only problem is that it doesn't support callerid (from the POTS side). > -----Original Message----- > From: John Schmerold [mailto:john@katy.com] > Sent: Tuesday, 5 August 2003 12:37 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Zhone Zplex 10 units > > Thanks for the Zplex heads up. > > Steven

This may be a long shot, but I suppose it can't hurt to ask! I have seen chatter regarding Zhone channel banks amongst the asterisk users primarily. In all of my searching I am guessing that the majority of people using the Zhone's are probably reading this, and with the support that I have seen from Zhone so far this is probably my best bet, I recently picked one up for a project

Hi. I was wondering if the zplex in the dev kit could be configured to have all fxs ports, instead of the standard 8 fxo + 16 fxs. If so, anyone managed to do that? Matteo. -- Matteo Brancaleoni Powered by RedHat Linux 8.0 Linux User #153521 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w-- O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+ G e

hello all, I still experience the random off-hook on my fxo cxhannels, i am using a zplex-10b channel bank. which does not allow me to call out. The situation still persists...this is what i have in the zapata.conf [channels] context=internal context=incoming context=default usecallerid=no usecallwaiting=no signalling=fxs_ks channel=1-8 signalling=fxo_ks channel=16-24 but i still have the the

Hi I have the last firmware for zplex, if you like i send it to you, about the second question 24s means 24 extensions so you can configurate as you wish as fxo or fxs. Att Yelson Vivas

hello * users, i am using a zplex 10b(8fxosand 16fxs) connected to a T100 digium card, RH8.0. soon after running * i get this warning "file chan_zap.c,line 4155 (ss_thread):CallewrID returned with error on channel 'zap/7-1' then executes the other applications itself. --executing Wait("Zap/7-1","1") in new stack. -- executing..... it gives the same warning

Greetings, I have just purchased several Astra 390 phones ready for asterisk. I have placed a line with adsi=yes in the Zapata.conf file just before channel => 13 I have also added an extension exten => 6199,1,ADSIProg(asterisk.adsi) exten => 6199,2,Hangup in the extensions.conf file. When I try to program the phone I get the following: Asterisk CVS-03/28/04-12:02:10,

I have just make zhone set2default to factory default setting. What do i have to do to make T1 interface zhone match with T100P.

HI Asterisk Gurus I'm connecting my * server to a zplex 10B, I'm using a slot on my TE410P card as T1 to connect my server to the channel bank (i use a cross cable), the zplex doesn't show any alarm neither the server. I'm trying to make calls from (ext 1) from the channel bank, to other (ext 2) in the same channel bank, but when I dial the ext number, the dialtone doesn't

I came across this hack while looking through chan_zap.c. Is this still applicable for those w/ zplex cb's? Is it a maybe need or an absolutely need? Any background info would be appreciated. Sincerely, Andy Hester Consero (817)375-1244 (817)937-7977

I've just received a brand new zhone z-plex 10b. At first, I was able to login using the default (admin/zhone), and started exploring with the configuration, trying to set it up to work with the TE410P. Somehow the admin password was changed, but I don't know what it is anymore. So now I'm stuck at the login prompt, and can't get back to the CLI.... Is there a way to reset the

Is there a way to initiate a transfer using an analog handset? For instance I'm looking for a way to do something like the following: External call comes in and is answered by user A. After talking to the caller they determine that the caller really needs to speak to user B. Is there any way for user A to initiate a transfer to user B, using only their analog handset? Now to make

I have been playing with Asterisks for about 6 months, and have fallen in love with it. I have finally taken the plunge and gotten a T100P and a Zhone Zplex-10B (24FXS) channel bank. I have read everything that I can find on the mailing list, checked wiki, even searched the web with google. I believe that most everything is configured right The drivers load without error, and asterisks

I'm hoping that someone else has seen this problem. Running CVS version from 03/08/03 20:00 T100P -> Zplex-10 All internal call routing seems to work fine. Atempts to make calls on the FXO interface fail. Asterisk picks up the correct number dialed but there seems to be a problem with the Zplex transmitting that number on the POTS line. All attempts to dial out fail with the LEC giving

Hi, I have a mint, like-new (used only once) Zhone Z-Plex channel bank for sale. It has 16 FXS and 8 FXO (part number: Z-PLEX-10-24S/O). It functions as a channel bank, router, and CSU/DSU, combining T1, analog voice, and data. D4, SF, and ESF line formats are supported with AMI or B8ZS coding. It has dual T1 jacks, one ethernet jack, one serial port, one V.35 port, and 24 analog pairs

Hi Everybody I'm connecting a zplex 10B to a TE410P card on my asterisk server (i use a cross cable), the zplex doesn't show any alarm neither the server. I'm trying to make calls from 1 line from the channel bank, to another, but when I dial the ext number, the dialtone doesn't stop... every way i make the call and the called extension rings but when i pick up the phone i just

We were just testing forwarding one of our numbers to a VoIP CLEC and ran into an issue that we've seen before but never figured out the cause of. It seems if you call us and immediately hang up - or if the call is forwarded by Verizon (which stills rings about ? of one time) the Zhone detects the ring and answers the call.. The Zhone however DOESN"T detect that it's no longer

I've got a Zhone 24 port FXS to configure. The configuration is beyond stupid. The people that designed this unit should be chased down and fired. I'm going around in circles frigging with all the options. Does anyone have a config file for this unit that I can use as a starting point? -bill wlloyd@slap.net

I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is