similar to: NetJet and RAS

Hi, I'm not sure if I just missed something somewhere along the way, but I noticed while I was going through the CVS logs that there is an option in the wcfxs module to set an "opermode" - which apparently might help with echo issues around the globe (like the ones I'm seeing - some times). So I'd love to use it and give it a go. Apparently, there are some options that

As a follow up to my previous post, I have now identified what is causing the bug with the grandstream phones. When the line faxdetection=incoming is in the zapata.conf file, the grandstream phones will not ring, nor connect a call to the zaptel interface. Can anyone else confirm this bug? I'm going to play with the different options (incoming/outgoing/both) to see if it makes a

I am trying to set up somthing so I can dial into my asterisk box, and have it behave as a modem bank. Is there anything like that already, or am I going to have to write my own. I checked googls and found no leads, but thought I would ask here before I tried writing my own, just to make sure I wasnot reinventing the wheel. Thank you in advance for any responses. -Chris

hi! I'm trying to get zapras working in GSM csd network. Whenever a dialup call is initiated from the mobile to the * gateway the following appears in the log and zapras terminates. Phone gives the error dialup not answered. ==> /var/log/messages <== pppd[2310]: Plugin zaptel.so loaded. pppd[2310]: Zaptel Plugin Initialized pppd[2310]: Using zaptel device 'stdin' pppd[2310]:

Hi, I'm confused as anything by this bug. I'm hoping that it is just something screwy in my config. I have 1 Cisco 7960 and several Grandstream BT101 & 102's, and a Digium TDM31B. I'm running the latest CVS (CVS-HEAD-05/27/04-17:22:40) of both Asterisk and the Zaptel driver on Fedora Cora 1. When I make an outgoing call on the Cisco phone, everything works fine. I'm

I'm trying to use ZapRAS to enable ppp connection through my E1. After the ZapRAS command is executed, all sound is crappy on all lines! The only solution is to reboot the machine (or halt it, and then power it on since Digium's hardware doesn't like reboots). Anyone know how this can happen?! I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late though) not to work

I'm trying to use a Teles (netjet) ISDN BRI card with asterisk 1.2.9.1 Anyone was able to use this card with asterisk? I couldn't find much information about it. Any help?

My need to do this through asterisk is simply the ability to provide me access with no additional cost to my customer. It seems like a nice thing to include as long as authentication is done well. I have worked on a dozen or more types of switches and all of them have supported this or had the capabilty through hardware or licensing. I am trying to get around opening and closing the firewall,

Hello all! Sirrix AG, Saarbr?cken (manufacturer of the Sirrix.PCI4S0 4-port ISDN card for Asterisk) has released the new Asterisk dialplan command PPPD (app_pppd). It allows to connect a Linux PPP daemon to an arbitrary digital (ISDN) Asterisk channel to provide RAS dialin and dialout. The PPPD command has successfully been tested with Sirrix.PCI4S0 cards and a standard ISDN4Linux ipppd "on

Hi, I know we've talked about this phone to death. I have pretty good voice quality, with and without WEP enabled, using the G729a codec and DLink & Netgear access points. I am facing one obstacle that is driving me insane. Does anyone have the call hold feature working? If you do... how did you make it work? The instructions say to press the left button to place the call on hold,

OK... so I'm not sure what I'm looking at. I've had the good old echo problems on my Rev C FXO again this morning, so I thought I'd attempt some debugging, though I'm not sure what I'm looking at. This call has echo. Channel: 2 File Descriptor: 20 Span: 1I> Extension: Dialing: no Context: incoming Caller ID string: "External Call" <99999999> Destroy:

Hi, I don't know if this is possible - but can I set up asterisk to answer the FSO line after one or two rings rather than four? I haven't (yet) found a configuration variable to let me do this... Thanks in advance, Andrew _________________________ Andrew Yager Real World Technology Solutions Real People, Real SolUtions (tm) ph: (02) 9945 2567 fax: (02) 9945 2566 mob: 0405 15 2568

Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing

I been having a issue with call parking. I can park calls from internal extensions. But call from the outside can not be parked. When I recieve call from the outside I press the # key and nothing happens. Does any one have any thoughts? P.S. I am allowing the to be transferable. James --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com).

Well, it has been a long time since I used my NetJet S cards with asterisk (moved to the quad PRI card) but I am trying to get this working again for home use. Basically, what I am using is this: Linux 2.6.8.1: config lines: # ISDN subsystem CONFIG_ISDN=y # Old ISDN4Linux CONFIG_ISDN_I4L=y # CONFIG_ISDN_PPP is not set CONFIG_ISDN_AUDIO=y # CONFIG_ISDN_TTY_FAX is not set CONFIG_ISDN_DRV_HISAX=y

Hi, Is there a way to drop the ANSI colour strings from log files? In particular, I've got JSON logging throwing logs over to ES, but they have the ANSI colour escape sequences. Ideally I don't want to lose coloured logs from the console though, and I can't "see" a way to do this. Ast 16 at the moment… Andrew -------------- next part -------------- An HTML attachment was

Hi everyone, I have set up a Samba PDC (2.2.3a) that works fine. However, I still have NT Machines acting as RAS server. After switching from the former NT PDC to the Samba PDC, RAS Dial-In fails due to missing dial-in permissions. I found nothing in the docs about that, and only a post by Gerald Carter on this list saying he'd try to look into it, dated June 2001. Is it possible to

Hi ! I?m trying to figure out if it?s possible to add a W2K3 Server into a Samba 3.0 Domain and then have the RAS-Service on the W2K3 server authenthicate against the Samba Domain. Bringing the 2K3 into the Domain was not much of a problem, working fine so far, i can log on using Domain users etc. But i?ve been trying for a week now and i can?t get the RAS Service working properly. It always

Hi, I realise this is an old question, but I’m struggling to get my head around it. The ERD suggests that endpoints can link to multiple AoRs In what situation would you actually use this? Given that mapping of inbound calls is primary done to the endpoint, it looks to me like most of the scenarios where this might be beneficial are actually not possible? One example I had envisaged was being

Hi, I am searching for information on how to set up an NT4 RAS server to authenticate users against a Samba 3 PDC. Right now we have 2 domain controllers and the plan is to phase them out. We want to set up samba as the PDC, but we need RAS to work for the time being. Is there a way to do this? We are going to use the LDAP backend for samba. Is it also possible to have our NT4 BDC stay