similar to: loader.c:240 ast_load_resource: /usr/lib/asterisk/modules/chan_sip.so: undefined symbol: ast_moh_stop

This is a new install so it's a fresh checkout of everything. Does anyone know what might cause this error? [chan_sip.so]WARNING[16384]: File loader.c, Line 239 (ast_load_resource): /usr/lib/asterisk/modules/chan_sip.so: undefined symbol: ast_moh_stop -- BTEL Consulting 504-899-1387 or 850-484-4545 or 877-677-9643

Hi All, I am a newbie and having some trouble getting Asterisk to work. I have checked out zapata zaptel libpri and asterisk (both v1-0_stable and regular--in separate directories). All built according to the documentation I have found and installed correctly. I have modified/created zaptel.conf zapata.conf as attached. I get the following messages/error during asterisk startup. ==

Hello! Asterisk "CVS-HEAD-08/06/04-14:55:13" won't start on two of three different Gentoo machines. This is the output of gdb: ultra asterisk # gdb /usr/sbin/asterisk GNU gdb 6.0 Copyright 2003 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions.

Dear Asterisk developers, I run the same asterisk version on the home machine and on the work. On the home machine I have Slackware 10.0 (kernel 2.4.24) while on the work machine I have Mandrake 10.1 (kernel 2.6.8.1 <http://2.6.8.1>). When I run asterisk on the work machine, these warnings and error appear (there are no warnings or error at home): [ Booting......Oct 17 18:19:04

Hi everybody. I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7 My linux is a debian. It was working during a few days an suddenly (after a lot of reboot) I've got this error message that seems to be very popular but I couldn't find any answer on the net : ==============================================. Asterisk Dynamic Loader Starting: == Parsing

Hi all, I'm configuring meetme in asterisk but no luck. I dont have a digium card, so based on the wiki, i have to install the zaptel driver and enable the ztdummy on it. I compiled, install the module and enable it on the module.conf. When i tried to start the asterisk, asterisk wont start because of the error in loading the meetme module. Jun 16 15:36:56 WARNING[-1084989312]:

Hello everybody, I'm running Asterisk 1.2.24 on three servers which are configured almost identical. The servers use IAX to communicate between each other and SIP to communicate with the outside world through a Patton Smartnode 4960 gateway. One server has about 30 SIP phones registered, the other two servers have about 100 phones registered each. The "small" server runs fine

I have some problems starting asterisk with a hfc card using zaphfc: [chan_zap.so]Mar 8 17:53:06 WARNING[2447]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/chan_zap.so: undefined symbol: ast_retrieve_call_to_death Mar 8 17:53:06 WARNING[2447]: loader.c:391 load_modules: Loading module chan_zap.so failed! I'm using asterisk from debian/sid: Asterisk

I have had * installed for a couple of weeks now and am very impressed. I have got Zap, SIP and MGCP working and can call freely between them with just things like transfer still to sort out etc. I then though I would add H.323 support to my working system, having read the previous threads on the subject before I installed I installed the pre-reqs pwlib openh323 gnugk for h.323 gatekeeper

I'm trying to somewhat reduce the security risk of Asterisk, by loading less modules. In my installation I use SIP and IAX2 for incoming calls, and that's it. No voicemail, no call parking, it just plays back voice clips. I can remove /etc/asterisk/modules.conf modules one by one: ------------------------------------ [modules] autoload=yes noload => pbx_gtkconsole.so noload =>

Hi, I'm new to asterisk and try to get it work with capi.so. When I try to start asterisk with "asterisk -vvvvc" I get the following errors. I couldn't find any hint on the net what may be wrong in my configs. Has anybody got a hint? Here is the error output: [capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Jun 23

Hi, Yesterday evening I have done a full update of Asterisk on a test system. The version is CVS-08/25/03-15:55:51 After this operation I get some big problems: - the Voicemail2 application does not work anymore. I must disable it in modules.conf file in order to be able to start * without crashing. The following settings: noload => app_voicemail2.so noload => app_sayunixtime.so If

Hi, I try to use oh323 package from inaccessnetworks for asterisk, but after make and make install that package, I have this WARNING message hwen a try to launch asterisk from shell command line...asterisk -vvvc... [liboh323wrap.so]WARNING[1024]: File loader.c, Line 235 (ast_load_resource): No load_module in module /usr/lib/asterisk/modules/liboh323wrap.so

Hello ! First time I have instaled Asterisk without problem and working with a SIP clinet (X-Lite). Then I try to make the H323 with came with Asterisk. So, I DL pwlib v.1.5.2 in /root (./configure ; make) no errors DL openh323 in /root (./configure ; make opt): ------------ /root/openh323/src/h248.cxx:6178: internal error: Segmentation fault Please submit a full bug report, with preprocessed

Hi, I have read the wiki entries on IAX(2), but I'm afraid, it still have some questions: I have a working connection between two Asterisk-Servers (Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k on Debian 3.1) via IAX. Does this connection work with IAX or IAX2? When I try to load chan_iax2.so, I get the error message chan_iax2.so]Oct 11 10:09:52 WARNING[2288]: loader.c:258 ast_load_resource:

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

If I make a call to asterisk's r2 E1 I get these errors *CLI> Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 Rx bits 0x1 [1/ 1/ 0/ 0] Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 Detected Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 Making a new call with CRN

Hey all, I am in the middle of creating a new user wizard which will generate all the .conf's the new Asterisk user will require to get themselves up and running in Asterisk without having to touch a single configuration file. This is what I have come up with as a rough draft. It is far from complete, so I'm asking people to submit things that should be added, changed, removed

Hi, After a whole day of work, I finally complied oh323 0.6.3a successfully. But when I started asterisk, it cann't load oh323. Following is the error: [format_jpeg.so] => (JPEG (Joint Picture Experts Group) Image Format) == Registered format 'jpg' (JPEG (Joint Picture Experts Group)) [cdr_csv.so] => (Comma Separated Values CDR Backend) [chan_oh323.so]Jul 13 09:43:45

Hello, I have been trying to completely disable music on hold on my asterisk system. When a call is put on hold I do not want any music on hold, but I would like the remote user to get informed of this event (depending on the technology e.g. with a SIP reinvite and an SDP indicating the call is on hold). I have searched and tried out various approaches, but when putting the call on hold