similar to: VoicePulse broken?

I have two questions regarding number portability... 1) If I port a DID over to Voicepulse, can I then move that DID elsewhere somewhere down the road. Or does voicepulse now OWN that DID? 2) Can I take a DID assigned by Voicepulse and transfer it to someone else? If not, why? -jwb

I'm looking to set up multiple inbound Voicepulse Connect lines and have Asterisk route them direct to different IVR or Voicemail based on the inbound number that is called. Unfortunately, I just can't see how one would go about identifying the number that is being called. Has anyone been able to do something like this with Voicepulse? I appreciate any assistance. Phil

Has anyone been able to get * working with VoicePulse OpenAccess (SIP not IAX). I have found a ton of information about VoicePulse Connect but very little on the proper * settings for OpenAccess. Tried contacting VP with no response. If anyone has this working, can they share their extensions.conf and sip.conf files? Better yet, if it could be posted on the Wiki. Keith

I have a DID with VoicePulse Connect, but the sound quality is horrible, it is often choppy and the caller's voice cuts out for 2-3 seconds at least once a minute, I have contacted VoicePulse many times, and they do not do anything about it! Does anyone have any similar problems? It isnt my Asterisk config because I have 0 problems using NuFone.

I can ping it just fine. I am on gw5.voicepulse.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040615/054c83f4/attachment.htm

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

Dear Sirs, Anybody ever tried running SIP up against Voicepulse? On their http://connect.voicepulse.com they claim they support both SIP and IAX, but I can't seem to get SIP running. I have as mentioned before on this list - huge problems getting any timing devices running on some of my machines, so IAX is not really an option right now. If I try I get a "Service Unavailable"

I'm having trouble configuring these services the way I want. Basically I prefer using iLBC before GSM, however Iaxtel only want to talk GSM. It _seems_ that Voicepulse prefers GSM also, because even if I put ILBC before GSM in the "allow=" part of iax.conf, if GSM is mentioned, Voicepulse will use it. If I don't allow GSM Voicepulse will use ILBC. Does anyone know how to

I don't know if this has been mentioned yet: Voicepulse is now offering wholesale pricing and IAX2 connectivity for Asterisk users. No fees, pay as you go. They also offer incoming calls for $7.99 per month. See wholesale.voicepulse.com.

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

I am trying to set up IAX with Voicepulse. When I turn on debugging I get the following message when I call my PSTN number: NOTICE[1142106560]: File chan_iax2.c, Line 4321 (socket_read): Rejected connect attempt from 66.234.228.132, request '3017275115@VPWS' does not exist Any help would be GREATLY appreciated. Thanks, Isaac isaacmcdonald@attbi.com

...my VoicePulse Connect account is timing out on its login requests. Was working fine a hour ago. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc. mgraves@mstvp.com o713-861-4005 o800-905-6412 c713-201-1262 "Can't you see it all makes perfect

Is any one else having problems with Voicepulse today? Suddenly, I can't register and calls to my Voicepulse numbers get a fast busy. Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Just a quick couple of questions for ya'll. 1) Does anyone know if VoicePulse Connect will be supporting dtmf tones? I have had a terrible time getting a hold of anyone over there, and I need this functionality before I can migrate to * completely. 2) Are there currently any problems with inbound DID's? Everything is setup properly in *, but I am not able to receive inbound calls,

I want to collocate an * box somewhere, where better than where voicepulse chose to put their servers? They probably did their homework and selected someplace where good handoff to the pstn can be found, right/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050520/9f5975b8/attachment.htm

Hi all, I'm running Asterisk 1.0.0. I am a customer ( and supporter ) of voicepulse. For me, it works perfectly, but one of my customers noticed a small problem: During a conversation, when the otherside isn't talking, it's almost like the mic turns off. Not that big of a deal I know, and the more I think about it, the more this seems a voicepulse issue. But in the off

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

My goal is to have only 1 primary phone number that can seamlessly "pool" multiple VoicePulse accounts. Let's say I have 3 accounts with VoicePulse Connect 212-555-1000 (primary) 212-555-1001 212-555-1002 When I receive inbound calls on 212-555-1000, I want to "forward" or "roll over" the connection to 212-555-1001 and 212-555-1002 so that the 212-555-1000

Is there anyone out there who has VoicePulse Connect working with DTMF? I've been unable to get it to work from the start, and the recent VoicePulse updates did not help. A caller to my DID's hears Asterisk, but pressing DTMF does nothing: On call setup "iax2 debug" shows: ----------------- Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK

Is anyone else having really bad problems with Voicepulse over the past few days - terrible call quality, dropped calls etc.? Or is it a problem our end? Arrgggh. Makes you want to go back to POTS :-( Simon -- Simon J. Coles President & COO, Amphora Research Systems http://www.amphora-research.com/ EMail: simonc@amphora-research.com Phone: (513) 697-4764