similar to: Grandstream tftp cfg.txt format

Hello List. I am setting up asterisk as a central dialplan, voicemail and conference solution, connected to 12 Cisco 1760 Routers running Call Manager Express IOS distributed around the world. This is all done over VPN. These routers all have PSTN access in their respective country. So far all is good, and Asterisks interopability with the Cisco CME using SIP is very good, although

If you wan't to create a ringtone with makering.pl for firmware 1.0.50, be sure to create it as ring.bin and then rename it to ring1.bin / ring2.bin or ring3.bin. This seems to be the only change between the format from 1.0.4.68. Regards, Maron

Hello! I have a staff member abroad and need to provide him with the ability to make local calls. The features I need are: * Possibillity to make calls at local (Icelandic) charges from Ireland office. * Possibillity to call the local Icelandic number and reach the Ireland office. I'm also wondering if there is any isdn based solution since there is a possibillity of another staff

Hi all, I'm running Asterisk since two days, and it's really one of the phatest software available on the net!!! Respect!!! I have connected Asterisk as a call manager for a cisco gatekeeper. Everything works fine internal, but if I want to ring to a PSTN over another call manager, which is connected over ISDN, I get the following output. Has anyone experience in this or can help me?

Hi List. I've used 3x Snom 200 in a hotel environment for a year, all of them have failed at some point (1 went up in smoke, 1 handset failed, 1 display failed). I have 110 grandstream phones there of which only 3 have failed (whereof 2 due to brutal abuse), and in another company I have 75 Cisco 7940 (SCCP Firmware) phones where not a single one has failed (during 2 years). I have no

I'm planning on setting up some remote agents and before doing so, I did some simple PING tests to measure latency. The average latency I got was 250ms. Does anyone have experience in terms of quality of calls when there is such high latency? Can anyone comment? Thanks, Waldo

Hi everyone I'm interested in using the Telappliant/voip-talk offering as an alternative to my DDI analog problem. (see [Asterisk-Users] Multiple DDI & Hunting on Analog Lines (UK) for details) Does anyone on the list have any recent comments on reliability etc? I would really appricated some positive and negative comments. Cheers Matt

Hi All, I decided to have a go at installing Asterisk on FC2 which now runs on Kernel 2.6.. Unfortunately I didn't get very far.. When trying to build zaptel it required me to link /usr/scr/linux-2.6 to the default source dir which is /usr/src/linux-2.6.5-1.358.. I guess thats still the RH infulence.. :) After than I tried again but the page rolls with errors and finally ends with..

Hello all I am updating a test system from Debian 5 and Xen 3.2 to Debian 6 and Xen 4. After dist-upgrading, I did: aptitude -P install xen-hypervisor-4.0-i386 linux-image-xen-686 And then fixed Grub2 to boot the xen kernel. cat /etc/debian_version return 6, uname -a returns: Linux xen-test 2.6.32-5-xen-686 #1 SMP Wed Jan 12 07:52:18 UTC 2011 i686 GNU/Linux So far so good. I previously

Hi list, I'm trying to figure out the format of the binary data in cfg.txt - so i'm looking for someone with a GS phone/adapter from sipphone.com (bought there so it downloads the config there also). I suppose they use GAPS there and also download the cfg.txt configuration there? Please send tcpdump data of the tftp session - or other udp dump data. I have a tftpd server hacked and ready

Hi This is gluster 3.8.4. Volume options are out of the box. Sharding is off (and I don't think enabling it would matter) I haven't done much performance tuning. For one thing, using a simple script that just creates files I can easily flood the network, so I don't expect a performance issue. The problem we see is that after a certain time the fuse clients completely stop accepting

Hi, I needed to create config files for downloading to Grandstream devices and made a little script for it. It seems to work fine for the HT486. The script needs a config file (cfg.in) which is in this format: P2 = blah P10 = hrm ...etc... The configfile may contain comments (starting with '#') and empty lines. Mind that the 'gnkey=0b82' shouldn't be in the configfile, as

I have an analog Fax machine which I wish to connect to the network and the Asterisk server. It will connect through a GS Handytone 286 converter and then into the LAN. Is there any information out there on what I need to write in *sip.conf* and/or *extensions.conf* to make sure the fax works as a fax? Channel 8 on my T1 is a reserved, dedicated line for the fax number. Do I need to

Hi all, I usualy advise clients to use the native client if at all possible, as it is very robust. But I am running in to problems here. In this case the gluster system is used to store video streams. Basicaly the setup is the following: - A gluster cluster of 3 nodes, with ample storage. They export several volumes. - The network is 10GB, switched. - A "recording server" which

Like many others on this list, I had been experiencing periodic lockups with my Grandstream products (Handytone 286 ATA & BudgeTone 101). The lockups consisted of seemingly dead devices, no dialtone or response, until I power cycled via software or hardware. The workaround had been to reboot the device every 30 minutes with a cron job. I contacted Grandstream and although they didn't

Hi all, I am trying to do trivial things, like setting quota, or just querying the status and keep getting "Another transaction is in progres for <some volume>" These messages pop up, then disappear for a while, then pop up again... What do these messages mean? How do I figure out which "transaction" is meant here, and what do I do about it? Krist -- Vriendelijke

Hi Krist, What are your volume options on that setup? Have you tried tuning it for the kind of workload and files size you have? I would definitely do some tests with feature.shard=on/off first. If shard is on, try playing with features.shard-block-size. Do you have jumbo frames (MTU=9000) enabled across the switch and nodes? if you have concurrent clients writing/reading, it could be beneficial

Hi all, A few questions. - Is POSIX locking enabled when using the native client? I would assume yes. - What other settings/tuneables exist when it comes to file locking? Krist -- Vriendelijke Groet | Best Regards | Freundliche Gr??e | Cordialement ------------------------------ Krist van Besien | Senior Architect | Red Hat EMEA Cloud Practice | RHCE | RHCSA Open Stack @: krist at

On Thu, Aug 24, 2017 at 9:01 AM, Krist van Besien <krist at redhat.com> wrote: > Hi > This is gluster 3.8.4. Volume options are out of the box. Sharding is off > (and I don't think enabling it would matter) > > I haven't done much performance tuning. For one thing, using a simple > script that just creates files I can easily flood the network, so I don't >

Hello list. No intention to start a flamewar here but I would really like opinions from those who know both the Cisco and Asterisk system. I'm working for a company with 15 offices in 11 countries, offices are relatively small (3-20 people each) and most of them have a Cisco 1760 Router installed with Call manager express (CME) and 1-3 ISDN lines (2-6 simultaneous calls). We