similar to: call announce? in MeetMe?

Hello List, I have seen from the following link that, for SIP channels there is no audio communication possible in MeetMe with AGI_BACKGROUND. http://www.voip-info.org/wiki/view/Asterisk+cmd+MeetMe Currently we are using asterisk-1.6.2 and the problem still persists. Is there any solution available to overcome this problem? According to our requirement, we have to run an AGI script in MeetMe.

Has anyone here done any work on clustering Meetme conferences over multiple Asterisk boxes? The scenario I am thinking of is where there are two or more boxes connected to a set of PRIs that all answer to the same PSTN number, and where it's not possible to know in advance on which box a call would arrive. So it would be possible to have some calls on one box and some on another, that should

Hi Peoples I am having problems with meetme, in that it responds with "conf-invalid" when I dial a conference number. I notice that there is a note with regards to ztdummy, and the need for that to be loaded. Is this still the case? Is meetme dependent on this module? I do NOT use zaptel cards in my system, and there for zaptel is not loading. Can anyone shed some light

Thanks a lot Tony and Dhaval for your much appreciable suggestions. Regards, Rajib Rajib Deka SIEMENS Ltd. Robert V Chandran Tower, First Floor, West Wing, #149, Velechery Tambaram Main Road, Pallikaranai, Chennai-100, INDIA. www.siemens.com Mob: +91-9176780669 | E-Mail: rajib.deka at siemens.com Date: Wed, 20 Apr 2011 13:55:25 +0530 From: DHAVAL INDRODIYA <dhaval.it01034 at gmail.com>

Just a trivial question: was the term "Meetme" invented for Asterisk as something like a brand name for its conferencing? Or was it an existing generic term for dial-in conferencing? Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org

Hi there I am using IAX2 softphones dialing into meetme conferences. I also have jitterbuffer=yes, with typical jitterbuffer settings. The problem I am having is that as soon as there is a delay from a participant, then the delay continues until the participant hangs up and dials in again. When dialing in again the delay seems to go. It seems to me as though as soon as the server registers

Hi All! I am facing some delay in conferencing. Using DIAX for Voip calls ,no hardware used yet I am using MeetMe to achieve conferencing and am having a lot of delays. Can anyone tell me how to reduce the delay Regards, Amna Saleem -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have today reported a bug with the latest channel.c (1.134) that affects music-on-hold for the first user in a MeetMe room when calling from a Grandstream BT102. The music is broken up about 5-10 times a second. It doesn't happen when calling from Firefly. It is also fine on both clients with 1.133 of channel.c. I am using the ALAW codec. Mark at Digium can't reproduce the problem,

In article <E02FA554-9D6D-4E7D-8A78-5FBDE1DE939D at kicp.uchicago.edu>, Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > > > > On Sep 26, 2020, at 8:05 AM, Jerry Geis <jerry.geis at gmail.com> wrote: > > > > I have a disk that is flagging errors, attempting to rescue the data. > > > > I tried dd first - if gets about 117G of 320G disk

In article <20151125133008.6369360.14455.17239 at gmail.com>, Israel Gottlieb <isrlgb at gmail.com> wrote: > Try putting progress instead of answer Yes, I tried Progress already, and it didn't help. But thanks for the suggestion! Tony > I have a puzzling situation, and would be grateful for any insight. > > I have a dialplan that forwards an incoming call out to

Just an FYI FireFly no longer works with anything but the FireFly network. No more SIP, No more IAX. It was a damn good IAX client... too bad its crap now. bkw

I've just set up a new box with FC1+updates and the latest Stable Asterisk from CVS. Asterisk is started with the default safe_asterisk script with a console on TTY9. The coloured text on this console is made up of weird characters instead of normal. Please see http://www.softins.co.uk/dsc00018.jpg for an example. If I do "asterisk -rvvvvv" on a normal login, either via the

I have been writing a lot of AGI programs in C with good success. I would like somehow to have an AGI program continue in the background while the pbx execution returns to the dialplan and continues. Is this possible? I was thinking that perhaps I could fork or create another thread within the AGI prog. The reason I want to do so is in order to monitor external information (e.g. credit limit and

I am having problems getting the latest CVS right now. A cvs checkout asterisk -t gets to this part and sits forever: S-> server_register(fpm-world-mix.mp3, 1.1, , , , , ) S-> Register(fpm-world-mix.mp3, 1.1, , , ) Anyone know how I can just skip the file? Travis Conway EFS, Inc. Information Technology Desk:?? (334) 215-6551 Mobile: (334) 391-4450 mailto:travis@homeoffice.quikpawn.com

I've noticed that with FastAGI (and maybe AGI) that when you sequentially send a sequence of dial commands, if the call is picked up, that after the call ends, the Fast AGI script keeps executing the commands! Is there anyway to stop execution once a call is picked up? I think looking at the result codes after the Dial to determine if the call was picked up or not is not a good idea... if it

I have a puzzling situation, and would be grateful for any insight. I have a dialplan that forwards an incoming call out to another number via the same SIP trunk as it came in on. e.g. [from-siptrunk] exten => 0123456789,1,NoOp exten => 0123456789,n,Dial(SIP/siptrunk/0987654321) Now, if I use a different SIP trunk for the outbound call, than the inbound call came on, the call is set up

Does anyone know how a program, script or shell user can best determine whether the machine is running on bare metal or is a VMware guest? Cheers Tony -- Tony Mountifield Work: tony at softins.co.uk - http://www.softins.co.uk Play: tony at mountifield.org - http://tony.mountifield.org

Thanks for the feedback. I do agree with having multiple smaller servers. When I was first approached with this task I mentioned as much. However, the current desire is to work with already existing hardware. That is out of my hands at the moment unless it just can't be done. I will explore Freeswitch a bit soon to compare it as well. I am struggling to find what the bottle neck is in

I have a small number of boxes in different locations, and currently have a fairly crude cron job running on each, which does a ping of one or more of the other boxes, and if the ping fails, it emails me to say the other box might be down. It then emails me again the next time the other box appears to be up. Of course, this can't distinguish between the remote box really being down and there

Can anyone de-cypher the second entry for me? --------------------- httpd Begin ------------------------ Requests with error response codes 403 Forbidden /: 9 Time(s) /?c=4e5e5d7364f443e28fbf0d3ae744a59a: 3 Time(s) I have found the string via Google but have not located any explanation. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit