similar to: GSM v iLBC for low bandwidth connections

At 6:27 AM +1130 on 5/15/04, Craig wrote: >Hi Brian, > >Out of interest, what do you used to measure data throughput and graph >it? > >I have been trying to find something to do realtime logging and graphing >of data like this. > >craig Realtime graphing is not supported, but this tool happens to be UNIX-based and parseable by other upstream systems (like RRDTool or

I want use iLBC and have following in mind, please help me is it possible ? ISDN <-----(ALAW)-----> * <-----(ALAW)-----> SNOM SIP??<-----(iLBC)----->?*?<-----(ALAW)----->?SNOM 1. ISDN incoming codec is ALAW SNOM codec should be ALAW (can't be iLBC because a lack of codec). 2. SIP incoming codec should be iLBC (snom is ALAW). 3. SIP outgoing codec should be iLBC /snom

Hi, To push voice through a long thin wan (dsl) there are two choices: (1) have the cisco's (7912G) talk g729a to each other (reinvite=yes), or (2) have the cisco's talk to their local * in ulaw (reinvite=no), which talk to each other through a more advanced low-bandwidth codec (ilbc or speex) which is best? (2) would have more latency, wouldn't it? Did I miss a third option?

Hi kind developers, I need select soon the best freeware VOIP codec, I see that all competitors are using iLBC because of the separate packets management. How speex behave in case of packets drop? Why other choice all iLBC? Thank you for any kind answer. Best regards. ------------------------------------- Roberto Della Pasqua Http: www.dellapasqua.com Email/Msn: roberto@dellapasqua.com

The number of codecs is overwhelming to me. What do ya'll consider the best codec for conserving bandwidth? [I realize at the cost of quality] Secondly, what do you think the best codec for voice quality is? Yours, Matthew

Dears; I do not know if any had experience in using speex or ilbc with IAX and got good results, because I am facing a problem with GSM. I am facing a noise problem when I am using GSM with IAX trunk as following: IP Phone (G711) ---> Local Asterisk Box ---> IAX Trunk using GSM codec ---> Remote Asterisk Box ---> Digium Card (FXO) to terminate the call to the destination While no

I've just gotten off a skype conference call and it pisses me off that the quality of skype is higher than my asterisk calls. Is there such a thing as a super high bandwidth codec? In a situation that you have the bandwidth to share is there something that I can use for important calls when the situation warrants it? TIA, Dean -------------- next part -------------- An

Guys. I just downloaded the recent firmware for GS GXP 2000 and I must say the phone works great but... How do you make the conf button work?????? Anybody done that? Also, with great dissapointment I must ask, where is ILBC support? GS web page mentions it and the manual says it supports it almost using bolds :) soooooo where is it???? Any light on this?

Folks! We have purchased G729 and have been testing the codec on mUltiple Gateways. Here is what we have found. Here is the config I have used: ------------------------------- Asterisk Server On Dual Pentium Xeons with 6GB of RAM, running on Fedora Core 2 User1 is in USA on Broadband Cable User2 is in India on 64Kbps ISDN Line User1 using SIPURA SPA 2000 user2 using Xten professsional(X-pro)

Hello list , I?d like to announce possible problems with migrating any version prior to 1.0.2 to 1.0.3. Pay attention : 1. Codecs Codecs names/description have been changed . For example : versions <= 1.0.2 voip*CLI> show codecs Disclaimer: this command is for informational purposes only. It does not indicate anything about your configuration. 1 (1 << 0)

Hi! As the upstream of my DSL-connection is very slow, I'd like my sip-phones to use iLBC to connect to my *. My gateway provider only allows ulaw. Hence, I'd like to use the follwing setup: SIP-phone <--iLBC--> Asterisk <---ulaw----> PSTN-Gateway I get the following error: "Unable to find a codec translation path from ilbc to ulaw" Setup SIP-phone: disallow=all

I want use iLBC and have following in mind, please help me is it possible ? ISDN <-----(ALAW)-----> * <-----(ALAW)-----> SNOM SIP??<-----(iLBC)----->?*?<-----(ALAW)----->?SNOM 1. ISDN incoming codec is ALAW SNOM codec should be ALAW (can't be iLBC because a lack of codec). 2. SIP incoming codec should be iLBC (snom is ALAW). 3. SIP outgoing codec should be iLBC /snom

i tried asterisk ilbc codec against kphone. when the call got connected, i started to immediately get these kind of message to the console: WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of 52 bytes long from RTP (50)? WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of

Does anybody know if the updated licence on iLBC makes it safe to include in Asterisk when used in a commercial environment again? https://sites.google.com/site/webrtc/ilbc-freeware It seems to require that the Google iLBC licence document is on the box, but that otherwise it is free-to use by all in any way (BSD licence style). I believe that prior to that there was a requirement to register

Hi, I'm using IAXphone for remote users which limits me to the GSM codec. Internally I limit the SIP phones to iLBC codec (GS 101 1.0.5.0) I also use voiptalk.org for external PSTN access again using the iLBC codec. The problem I have is that when the IAXphone dials an internal phone or PSTN number either the line hangs up immediately or there is only one way audio from IAXphone. It works

Hello all, I've started implementing iLBC on some of the ATAs we have floating around clients' homes, but I'm coming against this error message with most of them: codec_ilbc.c: Huh? An ilbc frame that isn't a multiple of 50 bytes long from RTP (38)? The ATAs in question are various Grandstream models - the HT486 being the predominant one. Looking at the list archives, it's

This seems to have been reported before, but I've seen no resolution: http://lists.digium.com/pipermail/asterisk-dev/2003-August/001470.html http://lists.digium.com/pipermail/asterisk-users/2003-August/019091.html http://lists.digium.com/pipermail/asterisk-users/2003-October/024472.html When forcing use of Speex, no sound comes out at all (Speex-1.0.3 on the Asterisk server) When forcing

Hello Folks, I noticed that all of the IaxClient based softphones with exception of Firefly only seem to have support for GSM but what about iLBC? The quality is excellent with iLBC even on a dialup connection! Meanwhile while the audio on GSM often sounds scratchy. Is anyone looking to implement iLBC in an IaxClient based softphone soon? Errol Biz4Web Solutions Limited

I already have ilbc installed on my system. The files are: /usr/include/ilbc/iLBC_decode.h /usr/include/ilbc/iLBC_define.h /usr/include/ilbc/iLBC_encode.h /usr/lib/libilbc.a /usr/lib/libilbc.la /usr/lib/libilbc.so -> libilbc.so.0.0.0 /usr/lib/libilbc.so.0 -> libilbc.so.0.0.0 /usr/lib/libilbc.so.0.0.0 However, if I do a "make" in asterisk-1.4.19, it will not detect that libilbc.a

Aloha, Are there any hard phones that support ILBC? I see lots of soft phones but not Cisco, Polycom etc. Aloha, Matt