similar to: recommend a Linux based TFTP server

Well here is what I got from testing htree with NFS. http://labs.zianet.com/benchmarks_html/postmark_benchmarks_NFS_100_htree.html It looks like htree improves performance when the storage device is local(as per my previous post) but it looks like htree degrades performance when used in conjunction with NFS. I am going to try it with gigabit ethernet when I get the time to see if maybe I am

Hi I have looked through the wiki and search the mailing list, but I cannot find a way to intrude on a call, can asterisk do this feature? if so how? Thanks for your help Robb

Hi All I'm having problems posting to this list, no bounces the mails just dont show any advice how to get the postings through is there filtering? robb

Hi, Just thought I'd share some test results of mine in case anyone is interested. Basically the tests are siumulating what our product does with files - although the tests do it a lot quicker (not as many files though). The test is to create 1 million files (each containing the text of the file number) spread over a number of directories. The files are then removed in the same manner as

Wow, it takes a really long time to make a 2TB ext2fs. Are there better-than-default options that could be used for a large filesystem? mke2fs 1.34 (25-Jul-2003) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 244203520 inodes, 488382016 blocks 24419100 blocks (5.00%) reserved for the super user First data block=0 14905 block groups 32768 blocks per group,

Hi All I cannot seem to find a way to stop atserisk inercepting DTMF tones and regenerating them even on a zap to zap bridged call is this possible? Thanks Robb

Hello, I am trying to set up some Cisco 7940G phones with the 3com POE injectors. I have the 3CNJPSE24 power injector, this is the rackmountable 24 port injector. My question is does anyone know how to serial console into these things? I have tried just about every cable setup I can think of and baud rates but I can't seem to get anything out of it. I want to check to see what certain

Hi List I'm trying to update to the lastest kernel but I have a dirver that is not inculded in the distrubution, and I had to use the driver disk when installing centos 4.4 in the first place, The driver megasr .ko works fine with the installed kernel but I cannot find on for the updated kernel, any adive would be appreciated. without the updated driver there is a kernel panic on boot due to

Hi I have a requirement to bridge Digital ISDN call through an asterisk box but no matter what I setup in the dial plan the second leg of the zap bridge is always set to Transfer Capability of SPEECH, I wondered if any one has come across this and managed to fix it? Thanks in advance for your help Robb

Hi All Just been looking at stats for one of my sites, and I'm conserned about the number of error cause codes being returned from the telco for example 12000 calls processed 131 are cause code 31* normal. unspecified.* 139 are cause code 28 * invalid number format (address incomplete).* 112 are cause code 1 *Unallocated (unassigned) number. *this adds up to about 3% of calls not

Hello, Could someone create some newer htree patches for the 2.4.x kernel? There are some bug fixes in the 2.4.21-rc releases that would be nice to have but the htree patches preceed those and they won't apply cleanly to later pre/rc kernels. It sounds like Marcelo may be about ready to put out 2.4.21 so it may just be worth holding off until that happens, but I don't suspect much will

hi, i've made *some* benchmarks, i plan to do more. benchmarks requests welcome, e.g. "please test this...with that.." https://ephigenie.kicks-ass.net/bench/benchmark.html but only in https://ephigenie.kicks-ass.net/bench/prinz are results right now. I hope this is helpful. Thanks, Christian.

Hello everybody: This could be a stupid question, or may be not; I'm not sure 'cause I have not a very wide experience working with Asterisk, actually I just started last week. I need to make an IVR system work and I choose working with AGIs, written in Perl. The available documentation I've found show it as a very simple proccess, but it doesn't work for me... and I

Hi I have a problem with a new DECT phone I have bought The key pad works like a Mobile phone where you dial first then pick up the line, but it seems to dail too fast or spuriously, ie 012826736464 show on thew Asterisk console as 0012282677, could any one offer advice how to fix? Also when doing a ZAP bridge to this phone from an outside line the call is very echoy, but not an internal

Hi I have had a Centos 5 installed with asterisk and zaptel for a couple of weeks, I had to reboot eh machine today, and when it rebooted it got stuck at "Starting udev" if I remove thew tdm400 it boots OK, but no zaptel has anyone seen this , and can offer any advice? Thanks Robb

Don't you just hate it when something was working and when you come to use it in anger it's broken :-( Something in the, fairly, recent series of Asterisk updates has broken DIGITAL call passthrough. I've an ISDN PBX behind my Asterisk Box (PRI ISDN comes into port 1 of a Digium Wildcard and the PBX it connected to port 2 via an ISDN crossover cable). This PBX used to be able to

Hi I'm having a problem where the recall button doesn't work If i press recall before I dial numbers it disconnects me which is what I would expect, but during a conversation if I want to transfer the TDM 400 just ignores the recall Any advice would be gratefully received Thanks Robb

2008/10/5 robert.boardman at gmail.com <robert.boardman at gmail.com> > Kevin P. Fleming wrote: > > Olivier wrote: > > > > > >> 2. R Hook-flash key is now available to transfer calls. > >> In s450IP web management server, its defaults settings are : > >> Application-type: dtmf-relay > >> Application-signal: 16 > >> >

Nearly got an SPA922 phone working behind a NAT, the phone registers, and I can dial out and have two way speech, on an incoming call the SPA922 rings I answer and the SPA922 shows "Anwsering" but never does and the far end continues ringing until the voicemail answers, this then show as a disconnected call on the SPA922 I'm on the lastest firmware 6.1.5(a) Thanks in advance

Hi all I ahve been having problems loading the wcfss and wcfxo drivers I get an error message invalid argument and something about post install insmod failed the currently load modules do show the drivers loaded but asteris won't start lsmod root@slackware:~# lsmod Module Size Used by Not tainted soundcore 3332 0 (autoclean) wcfxo