similar to: no incoming audio on outgoing sipcalls

Hi all. Just as a quote note, can I thank everyone on this list. I find my self finding pretty much every answer I am looking for on here. And a big thanks to all thoughs helping us out. Mass Respect :) Ok, I'm using a SIP provider (SipGate UK) to do my international dialing etc, working great from extension 8 on phones. However some more friends/contacts have started using SipGate also, and

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Hello, a person trying to call me by my phone number is getting the error 488 Not acceptable here. I googled that error, seems like this error is normally caused by a failed codec negotation, though I have no clue how I could have read this out of the logs. Anyway, my setup is as follows: Asterisk 1.8.13.0 - NAT - Sipgate SIP Provider The user calling me is also using Sipgate and is calling my

Hi everybody, I have strange problem: I'm calling from inside (either X-Lite using SIP channel or a ISDN telephone using Zap Channel) using sipgate to a number in public network. When I'm hanging up before the other person picked up the phone, the line is not closed correctly. The phone keeps on ringing until timeout (of Sipgate I assume) and it even costs my money, if the other person

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

Hi out there, I think i've everything set up properly, outbound calls are working fine, but at incoming calls I can't hear anything, but the other one is able to hear me perfectly. I'm using an asterisk 1.6.1.10 in my internal network in a NAT, connected to my sip-provider using a trunk. Firewall settings on the router are: forward UDP port 5060,5004,10000-20000 to asterisk server

    I am having a strange problem with a new provider.  We already have a couple SIP trunks working fine.  We are trying a new provider but we are having one way audio problems with outgoing calls.  Incoming calls do have two way audio, only outgoing calls have this problem.  I do not see anything odd with a packet capture and using PJSIP history to check.  The provider says that on outgoing

Hi, I've set up an Asterisk as voip gatway: VOIP <-> Asterisk <-> hfc-s card <-> NTBA <-> Siemens Gigaset Dect ISDN pbx. Outgoing calls from dect handset to the world are working. Incoming calls don't even ring the handset. I'm using the dahdi driver with the zaphfc kernel module. The hfc-s card is in nt mode. The msn is set at the dect phone/base station

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

hello ! My problem is: Astriks should create a connection to other members using a german Sip provider (www.sipgate.de). there are no problems with connections to: o Sip- Accounts o national phone numbers o mobile phone numbers but connections to international phone numbers DO NOT WORK (see the attached protokoll). The connection to international phone numbers does work when I directly use

Hi, I have a few accounts with sipgate.co.uk to get some different DiD numbers. However, when an incoming call comes in, it seems to pick the wrong peer from sip.conf which sends the call into the wrong context and it fails because there is no extension in that context to match the register. Using the config's below, if I dial the DiD on account 2222222, it works fine - picks peer 2222222

How can I see which codec is in use during conversation. I can see (for example) which codecs are negotiated before SIP connection, but I don't know which is chosen: 12 headers, 12 lines Found RTP audio format 3 Found RTP audio format 97 Found RTP audio format 2 Found RTP audio format 101 Peer audio RTP is at port 217.10.79.30:15666 Found description format GSM Found description format iLBC

Hello everybody, my situation is the following: I have an ISDN telephone connected to a HFC ISDN card on an asterisk server. The asterisk server is behind a NAT, but all the ports (i.e. 5060 and the range specified in rtp.conf) are forwarded to the asterisk machine. I am using the German SIP provider Sipgate.de. The sip commands show that I am registered properly with Sipgate. My problem is

Hi! I have strange requirement: a incoming call should be duplicated to two outgoing calls (to two voice recorders). On the incoming channel we only receive RTP, on the two outgoing channel we only send RTP. I thought of: incoming call -> originate: make outgoing call to recorder 1 and put the channel into a confBridge -> originate: make outgoing call to recorder 2 and put the

Hello list, I use Asterisk with one sipgate.co.uk trunk. Asterisk connects to sipgate.co.uk as a sip agent/client (with "register =>" statement in sip.conf). If I restrict the number of ports used in rtp.conf (to 10000-10005 for example) - will that affect the sip sessions to sipgate.co.uk as well - or only those sessions where Asterisk acts as a sip proxy/server? Many thanks,

Hi, have some problem with incoming calls from sipgate. This was working in 1.4 but in 1.6 I get a 401 Unauthorized :-(. Sipgate has mentioned that I have to change the type to friend, but it is already friend, so what's wrong? Kind regards, Michael Here is the sip.conf: [sipgate_out] type=friend nat=yes username=1234567 fromuser=1234567 fromdomain=sipgate.de secret=secret host=sipgate.de

Hi all, we are working on a A to B basic Call scenario with early media. On that scenario we get a call from a PJSIP endpoint and we place a new call using ARI. On the created channel we receive a 183 Session progress where we have an announcement regarding e.g. the cost of the call (it's important for us to have this announcement to inform our customers about the costs). Using asterisk

Hi all, I have an issue with asterisk 13 and pjsip. I guess it is somehow Firewall related, but I'm unsure. A registration to Sipgate is established successfully: <Registration/ServerURI..............................> <Auth..........> <Status.......> ==========================================================================================

Hi, im using a Asterisk Server which is not behind NAT. First i had problems with the fax detection. But this is now solved after adding a wait(2) at the correct place. But i'm still unable to receive a fax due to res_rtp_asterisk.c:3548 ast_rtp_read: RTP Read too short after the Fax session has started. My sip.conf includes [general] allowguest=no alwaysauthreject=yes sendrpid=rpid