similar to: Mediatrix 1204 (4x FXO)

I'm having a problem getting outbound trunking to work using asterisk and an external SIP FXO. 7 digit dialing produces the following output: -- Executing Dial("SIP/mitel-fe17", "SIP/5925660@mediatrix-1204") in new stack -- Called 5925660@mediatrix-1204 -- SIP/mediatrix-1204-645e answered SIP/mitel-fe17 -- Attempting native bridge of SIP/mitel-fe17 and

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0

I added those lines to my configuration, and i just see with ethereal that my client dial and the 1204 led turn on and they started to interchange packets, im newbie with asterisk i have been trying another sip server with mediatrix that work so well, but i dont know how to set it up? could u send me all the configuration i need step by step? ----- Original Message ----- From: "Wojciech

I am attempting to use a Mediatrix 1204 to interface to multizone paging from Asterisk. I have 4 different paging interfaces and want to connect each of those 4 to an FXO port on the Mediatrix. The desired result is to be able to issue some SIP dial string from asterisk, seize the FXO port on the Mediatrix and then have a speech path. I am able to place calls over the Mediatrix when it's

Hi all, I just picked myself up a Mediatrix FXO SIP gateway to play around with and hook into Asterisk but have no documentation. Are there default passwords or IP's that I need to know if I do a factory reset? Or better still, would anyone have a User Manual they could send my way? Any help would be appreciated. TIA. Jamie

I bought a couple of Mediatrix 1204's a few of months back. (Perceived advantages were relatively low overall cost and size per port, and it isn't nearly as vibration sensitive as a PC would be.) Rich Adamson's review from Feb 1 is comprehensive, and the only thing I'd like to add is this: One "feature" of these units that absolutely infuriates me is its behavior for

Possible Mediatrix 1204 fxo sip gateway workaround Need some feedback from experienced * users relative to this workaround please please please. Problem: The mediatrix 4-port fxo gateway does not provide any mechanism for * to select which "port" an outbound pstn call will use. (See lots of previous posts over the past four days for more detail if needed.) Our reseller has been

Product Review Mediatrix 1204 4-Port SIP FXO Gateway Firmware: v2.4.10.69 - US Version US Retail: ~$750, Street Price: ~$450. The Mediatrix 1204 SIP FXO gateway is equipped with four RJ11 pstn jacks and one RJ45 Ethernet jack on its rear panel. It terminates the four pstn lines in either Loop Start or Ground Start mode, handles incoming CallerID, and generates either Dial Tone (back towards the

I have the user manual, I'll send it to your email tonight when I'll be in my home. I have an APA III-4FXO too, until today I can't put it to work with asterisk. Kind regards, Miguel Date: Fri, 03 Sep 2004 16:07:59 +1000 From: Jamie Carl <geek@j-code.net> Subject: [Asterisk-Users] Mediatrix APA III-4FXO (or 1204) help. Anyone with user manual? To:

Dear Group, I have been able to configure my Asterisk BOX to receive calls from Mediatrix 1204. I'm having problems sending calls out via my Mediatrix unit. The SIP Invite is sent to the Mediatrix but the Mediatrix unit sends back a Status : 480 Temporarily Unavailable. This is my configuration on Asterisk; exten => _78996.,1,Dial(SIP/${EXTEN:5}@192.168.6.52) exten =>

Anyone had any good/bad/otherwise experience with the Mediatrix 1204 Sip FXO 4-port gateway? The archives tend to suggest the box is not very straight forward, and possibly lacks some basic pstn interaction features. Thinking about trying one in place of a pair of x100p's (functioning fine now). CallerId, etc, supported on this gateway? Rich

Dear Group, I have my Asterisk box working with a Mediatrix 1204. I have 2 questions; 1) I do not seem to get a Call ID on the call coming via the Mediatrix 1204. I was wondering if anyone had this configured and if they could share this with me? 2) How do you route a call based on caller ID on Asterisk. At the moment I'm routing calls via DNIS. Thanks and Regards Shad Mortazavi

Hello! We are located in the UK, and we are planning to replace our old pbx with an asterisk based pbx. For outgoing calls our present pbx is connected to three PSTN lines which all have the same number. Internally, the pbx caters for quite a few extensions, and each extension can make outbound phone calls. Only very rarely does our call volume exceed three simultaneous connections (inside to

Hello guys, I need your help related to a mediatrix 1204 configuration. I read some of the messages that you posted in the asterisk users mailing list about the mediatrix 1204 and decided to contact you. I know that the community is not related to Mediatrix devices, but so far I have not found any other group that has work as much as you with them. I bought the mediatrix in Mexico and my provider

i'm new here and i need help on how where can i get software version 4.0.x of the mediatrix and how can i install it... mediatrix unit im using has a software version of 2.4.9.57. i would like to use H.323 not SIP... please need help asap!... hope to hear from anyone of you soon.. thanks in advance! ------ eder _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain

Hi all. I'm evaluating a mediatrix 2fxs 1102. seems great (it has also supervised transfer, that's very needed in office environments and works well). the only I thing I cannot make work is the auth to my asterisk server. If I don't set a password into the mediatrix and *, I can call out, but still the registration goes wrong. using a password, nothing works. I've done some

Hi! Has anyone on the board successfully installed a Mediatrix 1102 or 1104 as a SIP peer on Asterisk? I'm trying to configure different user accounts on each FXS port, but I'm having authentication problems; Asterisk is saying the client is not authorized. Interestingly enough, I can dial a "9" and make a local call through the Mediatrix. Thanks! chris --------------

Hi all, I just got a Mediatrix 1104 evaluation unit -- a 4 port fxs sip gateway. There's no printed documentation shipped with the unit, but I have a piece of software for windows that shipped with a different model (which I haven't tried configuring yet), that uses snmp to set misc variables (ip settings, sip stuff, etc.). Fairly baroque interface & pretty slim on help...

Hi, I have problems with Asterisk recognizing dtmf tones sent by Mediatrix 1104 FXS. I can not enter mailbox number (voicemail) or pin code (meet-me). Asterisk shows 'username not entered' when dialing in voicemail. Both asterisk and Mediatrix have set inband dtmf. Can anyone help me out ? Best regards, Dave

Hi all, Please excuse my newbie status I need help in configuring a mediatrix 1204 PSTN gateway with asterisk. Basically each FXO port is configured with a SIP username and automatic transfer extension, which should transfer incoming calls to an asterisk extension. I created extensions corresponding to the FXO port SIP usernames. Port 1 - SIP username - 21383396 - call forward to - 300