similar to: dual x100p and x-lite help for newbie

Hi When i make a call using IAX2, the log of the remote asterisk say Nov 17 20:20:12 NOTICE[28686]: File rtp.c, Line 263 (process_rfc3389): RFC3389 s upport incomplete. Turn off on client if possible Nov 17 20:20:22 NOTICE[28686]: File rtp.c, Line 263 (process_rfc3389): RFC3389 s upport incomplete. Turn off on client if possible Nov 17 20:20:26 NOTICE[28686]: File rtp.c, Line 263

I'm getting some warnings: NOTICE[xxx]: File rtp.c, Line 264 (process_rfc3389): RFC3389 support incomplete. Turn off on client if possible Asterisk Version: CVS-01/06/04-13:50:26 Cisco ATA 186 version: v3.0.0 atasip (Build 031210A) Is this something I should be concerned about? Anyone know how to "turn off" the RFC3389 support on the ata 186? Thanks!

I have a ATA 186 with SIP firmware 3.1 when I changed the configurations to use the g.726 codec I received many erros and the calls doesn't work. I changed the fields: - LBRCodec: 6 <- the code for g.726 - TXCodec: 6 - RxCodec: 6 The errors: Jul 9 13:15:37 NOTICE[1192491824]: rtp.c:500 ast_rtp_read: Unable to calculate samples for format G726 Jul 9 13:15:37 NOTICE[1192491824]:

Hello All, We are running Asterisk on a linux server as a SIP proxy with Cisco ATA 186's at the subscriber end. For long distance we have iax2 connectivity with a ip carrier. For local calls we are routing out through a commercial VEGA voicestream pots unit to an adtran channel bank and then from there to our class 5 soft switch. The sip to sip calls and the long distance calls work great.

Hi, Below if the error message which I got from asterisk. I was trying to fax to asterisk from my fax machine. I really dunno what is the problem. I use alaw & ulaw codec only through my ATA 186. Can anyone help me what could be the problem. -- Executing Goto("SIP/-080ef9a0", "13732|s|1") in new stack -- Goto (13732,s,1) -- Executing

-- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 -- Attempting native bridge of SIP/1009-3df0 and SIP/101-f8f1 RFC3389: 5 bytes, level 0... Aug 27 08:32:16 NOTICE[23572]: rtp.c:289 process_rfc3389: RFC3389 support incomplete. Turn off on client if possible Killed Whenever I make a call between extension 101 and 1009 which are both Xten Xlite SIP clients, I get that error and

I can't login anymore... used to be able to. Timing doesn't seem to be working well any ideas? Also what is this "NOTICE" I'm getting? *CLI> == Accepting call on 'SIP/lenny-b19c' ("Lenny Tropiano" <5555>) -- Executing VoiceMailMain("SIP/lenny-b19c", "") in new stack == Parsing

When making or receiving a SIP call via my service provider, I get the following message logged by Asterisk: Dec 11 15:13:37 NOTICE[7392]: rtp.c:331 process_rfc3389: Comfort noise support incomplete in Asterisk (RFC 3389). Please turn off on client if possible. Client IP: xxx.xxx.xxx.xxx Since the "client" is at my service provider (who uses CISCO kit, I believe), I don't have the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've tested the S100U unit in two different computers both with different USB subsystems. The one it worked the best in used the usb-uhci USB driver. The other system uses the usb-ohci USB driver. To make sure it was not the installation, I used the same hard drive that had asterisk in both systems. And I moved the X101P and S100U between both

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

> Hello all, > Can someone help me on the problem which I have on MGCP phone test . I test mgcp - asterisk- zap. But I got several NOTICE message from rtp.c. > NOTICE[20501]: File rtp.c, Line 221 (process_rfc3389): RFC3389 support > incomplete. Turn off on client if possible > > -- Endpoint 'aaln/1@VG101-1-1' observed '9' > NOTICE[20501]: File rtp.c,

Hi, I don't seem to be able to get music on hold to play normally. The sound gets often interrupted with a few seconds of silence then starts playing again. I'm using mpg123-0.59r and tried mp3 files with different sample rates with no luck. If that matters, endpoints are SIP ata186, SIP Cisco 7960 and H.323 (over chan_h323) Quintum Tenor. Sometimes it may play fine for a few minutes

Hello all ! I have a problem with my IVR with terminate connection from PSTN phone Here is my configuration extension.conf [ivri] ;exten => s,1,Wait(1) exten => s,1,Answer ;exten => s,2,DigitTimeout(5) ;exten => s,3,ResponseTimeout(10) exten => ivr,1,Background(demo-congrats) exten => 1,1,MP3player,/mnt/linux/mp3/song/04.mp3 exten =>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are

I am trying to get asterisk to email me my voicemail as attachments. What am I missing? Where do I tell it to go for SMTP services? Voicemail.conf: ; ; Voicemail Configuration ; [general] format=wav49|gsm|wav serveremail=pbx.agtcorp.local attach=yes maxmessage=180 skipms=3000 maxsilence=10 silencethreshold=128 maxlogins=3 append=yes [default] 100 => 1234,Sean Garland,sean@siskiyoutech.com

Ok I have a question. I have Xten-lite working with our Asterisk system and I am able to make and get calls. But the main problem is the sound is very choppy and sometimes it cuts off words. I have tested it with ulaw and alaw as well as GSM. They all do the same. ulaw seems to work better. I also have an ATA-186 which works great without this problem. Here is my Sip.conf settings.

Folks, It seems like the * v 0.9 and iaxcomm won't speak to each other. Is there another IAX2 client that is usable under Linux (Debian preferred)? Thanks, Tim --

I am attempting to setup a simple network-to-network IPSec tunnel. The tunnel appears to be setup correctly because I can make connections between the networks and tcpdump shows esp packets going between the two gateways. My problem is that I cannot make connections from one gateway to the other through the tunnel. I think that this is a routing issue. Here is some more info about my network:

Out of the blue i started receiving the following error on my PRI line which connects my asterisk server to a Norstar 0x32 key system. The asterisk zaptel.conf file was configure as follows and this config worked for 6 months until friday. Nothing was changed on either system prior to friday. here is teh zaptel.conf span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48

http://www.skype.net/download_pda.html http://australianit.news.com.au/articles/0,7204,9214802%5e16123%5e%5enbv %5e,00.html -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040407/51a98542/attachment.htm