similar to: Some Grandstream news

Hello, Has anyone gotten a Grandstream BT100 to work with Level 3's 3Tone? I've been able to get my extension to interface with it, but there is no sound and the call on the GS side terminates prematurely. Here is the relavent portion of the SIP.CONF [4007] ; Budgetone BT100 type=friend insecure=yes context=test-budget username=4007 fromuser=4007 callerid=4007 host=dynamic nat=yes

Like many others on this list, I had been experiencing periodic lockups with my Grandstream products (Handytone 286 ATA & BudgeTone 101). The lockups consisted of seemingly dead devices, no dialtone or response, until I power cycled via software or hardware. The workaround had been to reboot the device every 30 minutes with a cron job. I contacted Grandstream and although they didn't

Hi all, I have some peers configured in SIP.CONF file with parameters incominglimit and outgoinglimit set up to 10. By doing that, I expect that this peer will not be allowed to handle more than 10 incoming calls and 10 outgoing calls at the same time. However, since I upgraded to Asterisk 1.2.17, I started to face a problem. Sometimes, calls to those peers are not connected. When I check the

For those that don't read every line of source code here's something I found out today... -------- Deprecated incominglimit and outgoinglimit Incominglimit = number of calls the local extension can originate to Asterisk. Outgoinglimit = number of calls Asterisk will terminate to local extension. End of Life for these commands announced**, please use setgroup and checkgroup, that will

* Read the config sample files! (even if you're an Asterisk guru) ----------------------------------------------------------------- For those of you that have a working installation that you keep using, this is a reminder to check into the configs/ directory of the Asterisk source tree, regardless if you downloaded a tar ball or from CVS. As we add or change features in Asterisk, the sample

I have 2 issues which I need to resolve on our production Asterisk server: We are currently using Polycom IP600 VOIP phones for our office which are capable of handling 2 calls per SIP registration. What we're finding is when staff are on the phone, Asterisk will pass them a second call which will show up on their display, and an audible beep is heard over the phone (regular call waiting). I

Not being an asterisk expert, but having been around the block once or twice when it comes to data and the like, I have made some observations based on the examples given on voip-info.org Sip configs. it appears there is an adjustment to be made in the sip_buddies example table: >>> name Although set to 30 characters, I don't see where it is limited in the text file. In theory,

Is anyone successfully using one of these with Asterisk? I cannot get the phone to register, this message keeps coming up on the Asterisk console: Jul 29 14:11:39 NOTICE[1125350192]: chan_sip.c:7323 handle_request: Registration from '"000BEA801CA6" <sip:000BEA801CA6@hcs.net:5060>' failed for '204.194.36.138' The telephone LCD says "SIP registation

Hi All, This is the first time I'm submitting a patch, and I hope it fixes more than it breaks. I'm putting it here, since John Todd mentioned a while ago about the heavy load Mark and crew have at Digium (doing such good work), so I thought all of us could test this first, and if ok submit for inclusion in CVS later if appropriate. This is an extension to work done earlier (sorry I

I would like to setup a hunt group, not a group ring, using sip phones. Anyone done this with sip devices? Comments suggestions? I have not had much luck with the outgoinglimit=1, incominglimit=1 stuff that I would need to get busy extinctions to work right, which is why I'm asking on the list.

Hi, I seem to have a problem with chanisavail and the call limits on sip phones(incoming and outgoing) The problem seems to be that chanisavail when trying create to create channels and hanging them up afterwards screw up the current usage limit on the phones. Example with chanisavail: Phone A calls voicemail (usage now 1) Phone B tries to call Phone A and uses ChanIsAvail in the dialplan.

I recently configured a SIP peer which i must specify my fromuser as my ten digit "DID". I send calls to this peer, but whenever Asterisk sends an options message, the fromuser is "asterisk". Is this a bug? Or is there some other config I must make ? register = 2155551941:123456 at 10.0.138.226/2155551941~600 [peer](!) type=peer context=inbound qualify=yes

incominglimit is already implemented for SIP. Just specify under the endpoint how many incoming connections are allowed. For example, [cisco] type=friend username=cisco secret=blah nat=yes ; This phone may be natted host=dynamic canreinvite=no ; Cisco poops on reinvite sometimes qualify=200 ; Qualify peer is no more than 200ms away

Hi, I'm running 1.2 beta1 in a mini call center. I have 3 queues with 10 operators, and I'm running into some trouble because when all the operators are busy answering call asterisk still sends them more, resulting in a "beep beep" (call waiting) over and over again in Xlite audio. An easy solution woud be the use of a "single line" user agent, like firefly, still

Hello, I am running version 1.4 with realtime support. I've set (for Snom phones 300/320/360) a call limit of 1 (incominglimit and outgoinglimit fields in the database). - When I used 1.4 SIP SHOW PEER show that it has a call limit of 1. The problem was that when such a phone received a call and did attended transfer it was left "in use" and could not receive new calls. -

Hello, I bought a Grandstream Handytone 486 to forward incoming calls from our old analogue PBX to the asterisk server. My first test was connecting an analogue phone to the Handytone and calling a sip phone - worked. Now I used the same cable to connect the line port of the Handytone to the analogue pbx. When I call the number of the analogue PBX I hear a clicking inside, but the call

i am getting 403 Forbidden message from asterisk when it try to register my user agent. i am basically useing mysql through ODBC. i hvae checked ODBC connecteion with 'ODBC Show' command. ------------------------------------------------------ *CLI> odbc show Name: mysql1 DSN: asteriskdsn Connected: yes *CLI> ------------------------------------------------------ and user is added to

I got a Uniden UIP200 and started to configure it and I am lost.... I have a tftp server setup on my * server and have the files unidencom.txt and uniden<mac>.txt there. But it doesn't quite work yet. It registers as a sip phone (sip show peers), but I cann't dial it and the display shows #1 disconnected all the time. It has firmware version BS4.59a in it. I have no idea if I

It seems that when setting qualify = 200 or qualify = yes in the database for a sip friend/peer, RealTime does not update the registration status like it should. I also have several peers which have been offline and Asterisk still reports them as registered, even though the registration seconds are only 200. Asterisk Ver: CVS HEAD 12/1/2004 Layout of sip_buddies: mysql> describe

Hi anyone know if i can connect a Grandstream HandyTone 488 to Asterisk ? Actually my HandyTone 488 are connected to: wan port to my lan line FXO port are connected to my local analogic line i want that when a call in by my analog line, it's sent to my asterisk for other voip post can answer .. it's possible ? thanks bye