similar to: Intel 537ep

I am wandering if anyone can explain this unusual scenario. I am running Asterisk on Fedora. After the box boots, I run insmod wcfxs at a command line. The phones keep the red message light on and are in a state like they are not recognized yet. If I then run the command ztcfg, I don't get anything after the command, meaning that everything should be OK in zapata and zaptel confs and the

http://www.eweek.com/article2/0,1759,1591131,00.asp bkw -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040514/165456d3/attachment.htm

I am completely new to * ( I know read the archives but this is a little different case) I am trying to setup a Sip system out side my security firewalls for home users. I currently run a Cisco avvid solution internally but it's highly firwalled. I am planning on building a pri out of my 3745 cisco router and pluging it in to a 3810 which is on the outside setup with sip and running a *

I am really struggling getting Asterisk up and running utilizing these two cards. Has anyone had success with this combination? If so, would you be ever so kind to submit sample vpb.conf,zaptel.conf,zapata.conf and extension.conf files??? With great thanks, Ronald R. McDaniel Southern Computer Services, Inc. rmcdaniel@southerncomp.net (251) 444-3136 office (251) 446-3137 fax (251)

Ron, VoiceTronix worked with me last week and backported the new chan_vpb that's in the current HEAD CVS tree to the 1.0 stable branch. So if you are using 0.7.2 or 0.9.0 you can go to the VoiceTronix website now (note that this is very new) and download an Asterisk package. When you download it there is an new chan_vpb.c that needs to be put in your asterisk source code tree. Also there

Is anyone using the VoiceTronic Openline4 PCI (fxo) card? I am trying to setup Asterisk using a Digium 40B (4 port fxs) and an OpenLine4 (4 port fxo), however I can't find any examples or post that utilize this card. I have my stations (Sayson 390) ringing each other, but haven't had any success ringing out. I have the OpenLine4 loaded and all of the new drivers working good, just

This might have been talked about before, but I'm posting anyhow. I've got down to testing Asterisk yesterday, and I couldn't help but compare it with Skype (a Windoze only product, yet, but extremely efficient for some reason). Skype has almost unperceptible delay (LAN), while there is almost half a second of delay regardless of the codec on Asterisk. An even if we were to

Hi, I've seen some reports about ruuning Intel modem with 537 or MD3200 chipset running with Zaptel drivers as a FXO port. Did anybody managed to set up a PCI faxmodem based on Intel536ep chipset to work with * and Zaptel drivers? Modem seemd to work just fine with Linux, but the driver says no;) some more info: Linux 2.4.26 mazuchna:~# cat /proc/pci | grep 536 Communication

I work on the LLILC team, and we are trying to send debug line info through to the CoreCLR EE without using an EventListener because we need to send extra info (more than just available in DebugLoc) like if it’s a call instruction, a call site, etc. We thought extending AsmPrinterHandler would be useful since it seems to have information about debug locations, label offsets, and instruction

(background) The CoreCLR expects a JIT to produce a MSIL bytecode offset to code offset mapping annotated with a few extra bits denoting if it’s prolog/epilog, or it’s a call, or if there’s operands remaining on the MSIL virtual stack in some cases. Our initial prototype has the MSIL offset stashed in the line number field. We could stash the extra bits in the column info but that’s starting to

On Sun, 2016-04-17 at 21:49 +0300, aki.tuomi at dovecot.fi wrote: > > > > Did you check your setup against > http://wiki2.dovecot.org/Authentication/Kerberos I did. ?Of course, it's possible I've still managed to overlook something.? > Also can you provide klist -k on server? I assume you mean the kerberos server: [ root at knock ~]# klist -k Keytab

I'm getting this error when compiling .dovecot.sieve: $ /usr/libexec/dovecot/sievec .dovecot.sieve .dovecot.sievec Info: line 3: fileinto require missing Unable to parse script: script errors: line 3: fileinto require missing .dovecot.sieve just looks like this: $ cat .dovecot.sieve if header :contains ["List-Id"]

One of the suggestions I got for dealing with my analog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically

On Mon, 2016-04-18 at 08:59 +0300, aki.tuomi at dovecot.fi wrote: > > > > On April 18, 2016 at 8:13 AM Braden McDaniel <braden at endoframe.com> > > wrote: > > > > > > On Sun, 2016-04-17 at 21:49 +0300, aki.tuomi at dovecot.fi wrote: > > > > > > > > > > > > > > > Did you check your setup against > >

Has anyone gotten the voicetronix boards to work with Asterisk, what would it take? Or does anyone know where I can get 4 ports or more fxs PCI cards that do work with asterisk? Brian J. Schrock Network Engineer, RHCE, CCNA Anistone Technologies Phone: 614-798-9106 FAX: 614-573-7165 6926 Avery Rd. Dublin, OH 43017

Hi. I need help with my brand new Voicetronix OpenLine4 board that I installed into Asterisk. After building the Linux device driver and inserting the module, I modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the US settings and comment out the Austrailian ones. I made the appropriate entries for routing in vpb.conf and extensions.conf.... All appears to be well, except

Hey everyone, I'm looking into extending AsmPrinterHandler out of tree, to communicate information back to the CoreCLR EE, but all of the headers are in the lib directory. Is there any way to extend it out of tree, or is that not supported? The reason I'd like to do this out of tree is because we want to include clr headers as well, and we don't want to introduce that into llvm

Hi I'm buying a new box and it brings the new PCI-e standard and not the old PCI slots. I would like to know if the Digium Wildcard TDM400P and <http://www.digium.com/index.php?menu=wildcard_tdm400p2>Wildcard TE405P will work with this PCI Express. <http://www.digium.com/index.php?menu=wildcard_te405p> Has anybody worked with PCI-e yet? As far as i understand, the Wildcard

I'm setting up dovecot on a new box; and once again I find myself banging my head against GSSAPI authentication. The particularly irritating thing is that I have this working on another box. ?I've done my best to ape the configuration of that box; but it's been some years since I set it up and somewhere along the line I have failed. My dovecot.conf has: auth_mechanism = plain gssapi

Any one has documented how-tos for making voicetronix openline 4 to work with Asterisk. I have been contacting Australian Digium resellers and Digium cards are not approved in Australia. So I suppose Australian users are interested into putting Voicetronix in use. Any expereience to share will be most appreciated. David Kwok -------------- next part -------------- A non-text attachment was