similar to: Newbie Setting up Voicetronix OpenLine4

Ron, VoiceTronix worked with me last week and backported the new chan_vpb that's in the current HEAD CVS tree to the 1.0 stable branch. So if you are using 0.7.2 or 0.9.0 you can go to the VoiceTronix website now (note that this is very new) and download an Asterisk package. When you download it there is an new chan_vpb.c that needs to be put in your asterisk source code tree. Also there

I am really struggling getting Asterisk up and running utilizing these two cards. Has anyone had success with this combination? If so, would you be ever so kind to submit sample vpb.conf,zaptel.conf,zapata.conf and extension.conf files??? With great thanks, Ronald R. McDaniel Southern Computer Services, Inc. rmcdaniel@southerncomp.net (251) 444-3136 office (251) 446-3137 fax (251)

I am wandering if anyone can explain this unusual scenario. I am running Asterisk on Fedora. After the box boots, I run insmod wcfxs at a command line. The phones keep the red message light on and are in a state like they are not recognized yet. If I then run the command ztcfg, I don't get anything after the command, meaning that everything should be OK in zapata and zaptel confs and the

Hi. I need help with my brand new Voicetronix OpenLine4 board that I installed into Asterisk. After building the Linux device driver and inserting the module, I modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the US settings and comment out the Austrailian ones. I made the appropriate entries for routing in vpb.conf and extensions.conf.... All appears to be well, except

hi there, i've been able to successfully run asterisk with the Voicetronix OpenLine4 card, it can accept calls and function normally. The only problem I'm experiencing so far is getting the card to outdial to a third party. What I'm trying to achieve is basically call bridging, where the caller dials in to asterisk, some IVR plays and then attempts to perform a "transfer"

Hi I would like your comments on the openline4 card from voicetronix. I am trying to get one working and find it difficult. I was able to get asterisk working yesterday but now it doesn't work anymore While it worked I was able to make some calls and I heard a lot of jitter Any comments appreciated. Patrick

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

Owias, The 537 is, for the most part, a drop-in replacement for the Digium card. Please search the archive and the Wiki, as there have recently been several discussions about this exact subject. To my knowledge that is about the only modem that works, but keep in mind it is _not_ supported. That being said, follow the instructions on Digium's site for installing the X100P and you should be

Hello, list, I am using Asterisk with an OpenLine4 card. It worked well with Asterisk 1.0. Then I upgraded the system, Asterisk 1.4 had some problem to compile chan_vpb, but I managed to compile it manually. Still Asterisk does not work because it refused to load chan_vpb module. I had to revert back to install Asterisk 1.2. Then I get a error: asterisk: hip.cpp:793:

Hi all, I used to have an OpenLine4 card, but decided against using it due to some problems with hangup detect. Does anyone on the list actively use Voicetronix's OpenSwitch12? What are your opinions on the card? Cheers, Flynn

Any guidance on how to get my openline4 to get recognized by asterisk@home? I've got my vpb drivers running, but not sure how to add it as a trunk, should it be via zap? or is there another way? Thanks, Chuck

Hi, I am using a voicetronix OpenLine4. I downloaded a recent asterisk CVS from voicetronix webpage but have had no luck to reduce echo on outgoing calls and for it not to crach on incoming calls. I dont think both problems are related though. Here is an output of what happens when a new call comes in and my voicetronix tries to pick it up and crashes asterisk: > vpb/1-1: Event

Hi I'd like to use asterisk with my VoiceTronix OpenLine4 board my board works fine (driver 2.4.0 on kernel 2.6.8) on my Mandrake 10.1 official linux box I installed Asterisk 1.0.6 and it starts without problems I'm new to Asterisk, so I don't know how to test Asterisk with my board..... I'd like to call my phone and have Asterisk to answer somethink like "Hi I'm

Hi all, Just thought I'd pass along some pointers when outdialing with Voicetronix's OpenLine4 card. I was having a tough time dialing out from *, it probably has something to do with chan_vpb.c not waiting to hear the dialtone before telling the card to dial. A quick fix was to insert a "," in the dialstring telling the card to pause before dialing. However when the

I'm looking to use Asterisk to replace my current PBX system. I'm in Australia so I need to use Austel approved equipment. My plan is roughly as follows: - Get a box with a suitable card and install Asterisk - Connect our existing PSTN lines to the Asterisk box - Get suitable softphones/ip phones to connect to the Asterisk system - Route all intra-office calls over our VPN - Route all

Hi all, Trying to get fax reception going using a voicetronix openline4 card, however, there are two issues (as far as I can see) (1) Currently the voicetronix world (cards, firmware, drivers, channel prog etc.) does not do fax tone detection. I have spoken to the voicetronix guys , understand what has to happen there and may do some hacking if I can resolve the second issue. Meanwhile, I

Hi all, Can somebody help me get my OpenLine4 card running with asterisk@home? I've got my VPB drivers configured, but can't figure out how to map trunks and channels the typical way in the AMP config interface for Asterisk@home. Apparently I'm supposed to use /vpb/1 type commands, but I'm not sure how it should work. I'm relatively new to asterisk, I did a bunch of

http://www.eweek.com/article2/0,1759,1591131,00.asp bkw -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040514/165456d3/attachment.htm

Hi fellows I'm trying to set up an OpenLine4 card to an A@H I made a "custom trunk" and putting a "dial string" like this "vpb/1-1/$OUTNUM$" I configured the outbound routing using "8|." as patern and "NXXXXXX" as dial rule..., but I'm getting an "all circuits are busy now" when I dial "8NXXXXXX" Here is my vpb.conf