similar to: Galaxy Voice

Is anyone signed up with Vonage and using an asterisks box?? Also what VOIP providers would anyone recommend? -- James Moran Potential Technologies http://www.potentialtech.com

I got a call from GV on Monday evening telling me they wanted me to move my Asterisk server over to a new IP address (216.229.127.40) by this saturday. Why the couldn't tell me this in an email is beyond me but anyways .. So I done changed the number and so far its all ok but whilst testing I noticed that I could no longer accept incoming phone calls. I swapped back and still no inbound

Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April

Is there something on the Icecast server I can do to improve compatibility with devices that seem to have a problem with high latency? (at least I think latency is the problem) For example, I have a Samjunk Galaxy tablet that randomly drops the live audio stream. Any other device in my house works fine. I'm streaming an MP3 source live over an HTTPS Internet connection using Icecast

Hi, Has anybody tried to connect Samsung Galaxy to Asterisk PBX to be able to make calls over VoLTE? Thanks a lot in advance! Best regards, Sevana http://www.sevana.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150403/ac9b4a31/attachment.html>

My cell phone provider just sent me a letter stating that my 3 year contract is up and they will give me a Samsung Galaxy 3 if I will sign a new contract. I'm wondering how well (or if) that phone will work with Centos 6. My existing Samsung phone (can't remember the model number) doesn't integrate well or at all with Centos; whenever I plug it into the computer it finds the phone

Greetings! I am still new to R but have been asked to look at doing astronomy with R. I have a FITS file which contains an optical telescope image (it can be viewed in SAOimageDS9). I need to estimate the magnitude of a galaxy... and eventually other optical sources. How do I find the apparent magnitude of a galaxy from a FITS file? -- View this message in context:

See below, although none of these things should be specific to the Galaxy tablet (my older tablet works fine, too). On 2020-01-03 13:20, Robert Jeffares wrote: > Is the Galaxy using Wi-Fi ? YES > > How big is the mp3 stream? 128, 256, ? 32kb/s > > Is the Icecast sever on the same router? NO > > How many connections in the Icecast.xml? NO limits specified >

SUMMARY: Maybe this all boils down to "how do we debug when Java fails on Centos 6? DETAILS: If you don't have the Samsung Galaxy S3, then you might not realize how frustratingly difficult it is to transfer multiple files from the smartphone to Centos 6. It should be as simple as hooking up a USB cable and dragging and dropping (which it is, on most other smartphones, including the

hi @ all, i just wonder, if it is posible to read the values for all the three phases of a mge galaxy 6000 ups? we have unfortunately one mge comet ups (one phase) to play at work, but it is important to know, how many information upsc can deliver from a galaxy. we plane to use web / snmp interface. can someone post the upsc from such ups? thanks in advance, miroslav -- SHALTEV.ORG

Hello, At my workplace I have exact UPS config as stated in the subject (APC MGE Galaxy 5500 + AP9635CH). I have it set up to work with snmp-ups NUT driver. Despite many readings from *upsc* command I am not receiving "On Line Status" (ups.status OL) nor "On Battery Status" (ups.status OB) and therefore I can't get my systems to shutdown during a power outage event.

mateuszx via Nut-upsdev <nut-upsdev at alioth-lists.debian.net> writes: > At my workplace I have exact UPS config as stated in the subject (APC MGE > Galaxy 5500 + AP9635CH). > I have it set up to work with snmp-ups NUT driver. > Despite many readings from *upsc* command I am not receiving "On Line > Status" (ups.status OL) nor "On Battery Status"

Hello, At my workplace I have exact UPS config as stated in the subject (APC MGE Galaxy 5500 + AP9635CH). I have it set up to work with snmp-ups NUT driver. Despite many readings from *upsc* command I am not receiving "On Line Status" (ups.status OL) nor "On Battery Status" (ups.status OB) and therefore I can't get my systems to shutdown during a power outage event.

Also, which version of NUT is involved? There were recently PRs (merged to master-branch, eventually will be in 2.8.1) about more SNMP-UPS support including APCs e.g. 1674, 1679, 1113 (should be in 2.8.0)... Many distros still ship 2.7.4... Jim On Tue, Feb 28, 2023, 00:57 Greg Troxel <gdt at lexort.com> wrote: > mateuszx via Nut-upsdev <nut-upsdev at alioth-lists.debian.net>

I am getting ready to do my first build on this product. It's just for use as an overglorified answering machine right now and I will most likely play with some of the SIP functionality. My big question though, is how much disk space do messages take up on the system? Are there any published metrics detailing this information? Also, is there a means in which to have ASTERISKS act as a

I've got an update on this case Using tkmib I discovered that my UPS (NMC per say) sends its state by OID 1.3.6.1.4.1.318.1.1.1.11.1.1.0 .iso.org.dod.internet.private.enterprises.apc.products.hardware.ups.upsState.upsBasicState.upsBasicStateOutputState.0 = 0001010000000000001000000000000000000000000000000000000000000000 (mib used for this snmpget was powernet441.mib) (I got a description about

So what would it take me to edit NUT's code for my case to work? My Network Management Card sends its output state using unfortunately only (I guess so) this OID: 1.3.6.1.4.1.318.1.1.1.11.1.1.0 Weirdly the standard way of obtaining Battery Status (drivers/apc-mib.c) 1.3.6.1.4.1.318.1.1.1.2.1.1.0 gives me good results. Unfortunately power status OID's value type differs (my: 64 digits

One good intro to this is https://github.com/networkupstools/nut/blob/master/docs/snmp-subdrivers.txt although it focuses on adding new subdrivers - but more or less the same workflow applies to extending existing ones. Sometimes it helps to generate a new one for a currently-partially-supported device, and then compare with existing subdriver (using meld or similar GUI helps a lot) to port the

Well thanks, The solution for my problem was kinda easy (still need some testing though): found out my ups status is a string, so then I changed the way snmp-ups.c gets the status. Had to change *nut_snmp_get_int *to *nut_snmp_get_str *at around line 3470, then grab fourth char out, use *strtol *function to then send it to *su_status_set *function. I created my copy of *apc-mib.c *with my OID at

Call us on +91-9666 4000 48 - Mobiles <http://www.fosila.com/mobiles> - Cameras <http://www.fosila.com/cameras> - Laptops <http://www.fosila.com/laptops> - Bags <http://www.fosila.com/bags> - Watches <http://www.fosila.com/watches> - Toys <http://www.fosila.com/TeddyBears> Dear *User*, Unbelievable offer Limited stock. Grab it!! Samsung