similar to: PSTN Call drops randomly

Set busydetect=no in your zapata.conf file. That should stop the random hang-ups. If you really need busy detection, try setting busycount=8 or even 10. If you still get random hang-ups, turn off busy detection and turn on call progress. May help the situation. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From:

Hi list, we have 2 asterisk boxes in VM (kvm) on 2 different Dell servers, one is Lenny kernel 2.6.26 asterisk 1.6.2.20, the second CentOS 2.6.18 asterisk 1.4.36 (Elastix). Both 64bits, no hardware involved, dahdi on both machines for meetme timing. Doing core show translation give on the Lenny server Translation times between formats (in microseconds) for one second of data

Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap

I'm trying to NFS-mount a CentOS directory on my Fedora laptop, but I find I can only do this is I turn off the firewall on the CentOS server. If instead I go to system-config-securitylevel-tui on the server, and allow NFS4, this does not do the trick. Nor does allowing port 2049. What do I need to allow? [I should say that the CentOS server is remote, and difficult to access directly; that

Hi Folks, I'm using VMWare on a Linux Host (CentOS) with a Linux-Guest Sidux). And I'd like to use NFS. Furthermore I'd like to use the Firewall in CentOS with this little GUI. If I activate this firewall then my Guest says "no route to host" on mounting nfs. Firewall disabled -> no problem occurs. Is there a solution to use firewall _and_ nfs ? Please, no iptables

An embedded message was scrubbed... From: Niki Kovacs <contact at kikinovak.net> Subject: Re: [CentOS] Getting started with NFS Date: Sat, 04 Jul 2009 10:33:31 +0200 Size: 1377 URL: <http://lists.centos.org/pipermail/centos/attachments/20090704/b8ff2d37/attachment-0003.eml>

We have a Mediatrix 1102 hooked into the network. Both of the attached analog phones and all of their features work, but in the CLI we keep getting "-- Got SIP response 481 "Transaction Does Not Exist" back from XXX.XXX.XXX.XXX " (Where XXX is the IP address of the Mediatrix ) every few minutes. I have changed most of the settings in the sip.conf multiple times and have done

Hi.. I just wondering why DTMF are not recognized by aterisk on incoming calls from my SIP provider ... ANy suggesteions ?` /Mike

Hello list, I am trying to solve a problem and after unsucessfully chasing forums and google for some hours, I turn to you in hope of a solution. I feel it's just a configuration issue but I just can't get my head wrapped around it. The situation is basically this: I have an Asterisk connected to an Alcatel OmniPCX via SIP. Asterisk only ever does SIP and has no dedicated hardware

Hello, I want to access a shared folder on my linux from a windows machine. The smb.conf has this entry ?? [samba_share] ??????? comment = QEMU share place ??????? path = /media/samba_share ??????? valid users = mahmood vb ??????? public = no ??????? writable = yes ??????? printable = no ??????? create mask = 0777 Then I added a user to samba with "smbpasswd mahmood". The folder mask

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Hi all, Which ports do I need to have open on an NFS client's firewall to allow it to connect to a remote NFS servers? When I disable iptables (using ConfigServerFirewall), it connects fine, but as soon as I enable it, NFS gives me this error: root at saturn:[~]$ mount master1.mydomain.co.za:/saturn /bck mount: mount to NFS server 'master1.mydomain.co.za' failed: RPC Error: Unable to

Hi all, 1) My NFS3 clients don't display or obey existing non-POSIX ACLs on files of NFS3-mounted exports. 2) setfacl on the client throws error and fails : # setfacl -m u:stowler:rw testfile.text setfacl: testfile.text: Operation not supported 3) at time of client mount the server's /var/log/messages shows "kernel: svc: unknown version (3)". Any thoughts greatly

Hello, When I want to install libvirt-0.10.0 from source, I get this error at the configure stage checking for libdevmapper.h... no configure: error: You must install device-mapper-devel/libdevmapper >= 1.0.0 to compile libvirt However the package is installed on my system # yum list device-mapper-libs.x86_64 Installed Packages device-mapper-libs.x86_64                               

Dear all, Could somebody please explain what the following conflict is about? best mahmood R> conflicts(detail=TRUE) $"package:methods" [1] "body<-" $"package:base" [1] "body<-" R> PS: I send an earlier mail yesterday on this subject that was definitly not clear, therefore I try again. http://www.ne.su.se/~ma

So IMO, if we modify the VF calculation for targets/subtargets using TTI where higher VF is supported The vectorizer’s scope will become wider. Did/do you foresee any issue with this? Thanks, Shahid From: Nadav Rotem [mailto:nrotem at apple.com] Sent: Saturday, December 13, 2014 2:47 AM To: Shahid, Asghar-ahmad Cc: llvmdev at cs.uiuc.edu Subject: Re: [LLVMdev] Vectorization factor limitation in

Let me lay it out for you.... Call comes in over a T1 - Signal is em_w. The extension is seen as *<callerid>*<last 4 digits of number being called>*. Which is fine in it self. I have my extension.conf file set up as follows... [did] ; Receive call as *<calling>*<called> exten => _.,1,Answer exten => _.,2,Cut(CALLING=EXTEN,*,2) exten =>

I am having problem with Samba 2.x. I am be able to login to Samba without a problem :). When I login to "Shahid" account it directed to "/home/shahid" but I can still can see another user home dir too? why that so like I login as "shahid" account then can see "/home/shahid" but why I can see " /home/test" too - it shouldnt be? Each user

OK. I am trying to install virt-manager from source but found it difficult! So I decided to install from repo. # yum install virt-manager libvirt Dependencies Resolved ========================================================================================================================  Package                       Arch                 Version                            

Hi, I'm using Asterisk with two Cisco 7960 phones using SIP. I'm seeing the following weird behavior: SIP Phome 1 is extension 4002 SIP Phone 2 is extension 4003 I call 4002 from 4003 and that works fine. I call 4003 from 4002, and it rings locally to 4002, never gets to 4003. I'm able to send a config query packet to 4003 from the asterisk console and get a response, when I send