similar to: * and CCM Voicemail questions

Hi, i'm searching and trying, but can't get it working. I'm trying to send calls from Cisco Callmanager to Asterisk with oh323 channel driver. Therefor the asterisk is defined as a H323 Gateway in the Cisco Callmanager. The Call comes from CCM to Asterisk and it works but i didn't get the called number. This is needed because i want to make Voicemailboxes. If i connect via

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Christopher- Nothing like defining a complicated environment. I do have some experience in this arena- but unfortunately, not with the OH323 driver- I generally stick to the Nufone driver, as I find it more reliable overall. YMMV. One thing that might help is if you could tell us if it ever worked, or if this is a new problem that's cropped up since a particular change. Still- there are

I have one and only one reason to use OH323, and that is it works with Cisco's CallManager. The standard H323 channel has one-way audio issues when connected to CCM and fixing them has been identified as a low priority/never going to happen task. Dan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

We are planning to install a voip system based on asterisk for 2000-3000 retail locations and up to 6000-8000 sip accounts/users. Instead of setting up a new, centralized PSTN gateway, we are intend to use a CISCO gateway/router of an existing CISCO voip solution in the headquarter and we must able to call all CISCO based voip phones in the headquarter running together with a CCM. SIP-Phones

Hi, I'm using Asterisk 1.2.3 with the asterisk-oh323 channel driver, version 0.7.3. Pwlib is V1.8.7 an OpenH323 is V1.15.6. Following CallFlow: SIP-UA -> OpenSER -> * -> CCM OpenSER routes all calls with prefix 60 to Asterisk, where I've configured following extension: exten => _60.,1,Dial(OH323/${EXTEN:2}@v.w.x.y) v.w.x.y is a Cisco Callmanager where Asterisk is

Hi, Where can I find information on H.323 for Asterisk and/or integration with Cisco CallManager in particular? <http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration> I have oh323 working on Asterisk. Since the CallManger I am working with is running 3.3.3 I cannot use SIP... Thanks, Adi

I would like to setup Asterisk for voicemail with CallManager 3.3(5). I would like to know what would be the best Distro of Linux to use and version, what version of Asterisk works best to interact with CallManager, and what H323 ChannelType works. As you probably read in another thread I tried FC5 with Asterisk 1.4 and OOH323 (included with the addons package). This doesn't seem to work to

Hello, I have Cisco CallManager 3.3.4 and Asterisk@Home latest version. I have earlier tried getting Asterisk to register with CCM via H323 and failed. Back then, I learned that this is a known bug in Asterisk. Also people who tried doing that had also succeeded in getting calls to go through only one direction like from CCM to Asterisk. I am not that expert so excuse my ignorance with this

Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages

I am trying to setup Asterisk as the voicemail server for Cisco Call Manager. I have just about everything working except for the message waiting indicator. I have the following setup in context [ccm] in my extensions.conf file: ;MWI exten => _2807XXX,1,SetCallerID(${EXTEN:3}) exten => _2807XXX,2,Dial(SIP/28888@65.202.115.240) exten => _2807XXX,3,Answer exten => _2807XXX,4,Wait,1

Hi, I have the following config: [7960] <--skinny--> [Cisco CCM] <--SIP_trunk--> [asterisk] <--SIP--> [X-lite] Is there a chance to avoid the RTP stream from passing through the Cisco CCM ? I would like to have all RTP handled by the *. This is just a testbed, for a larger project. What I want to achieve, is actually this: [Cisco Phone] <--skinny--> [Cisco CCM]

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1, Asterisk is running strictly VoIP over the network and using CCM as the trunk. Calls from the SIP phones connected to Asterisk work fine. They can call both external numbers and any Cisco extensions attached to CCM. Calls from CCM to Asterisk fail without any notification in Asterisk (and I DID have this working at one

continuing discussions of 79xx issues. i've seen referenced and am experiencing difficulty getting a 7970 to work behind NAT to a public asterisk server. i am successful with 7960s. 1. SIP load is 70.8-3-3SR2S 2. config works fine if 7970 is connecting to an asterisk server a local LAN (same subnet) 3. when debugging it in a NAT'd environment I see the register and

Check to see if you can get a IOS code leverl that supports SIP on the 6500. then maybe you can use your E1 card directly. you can also get a SIP version of the code for the 7960's etc Dave >>> jwi@weball.csis.dk 6/28/2003 2:56:12 PM >>> Hi Chris I've done a lot of things with Cisco AVVID solutions in the past. > CallManager).....am I right in saying that Cisco

Hello, I am trying to get MWI working after integrating Asterisk with CCM.I have followed the instructions in http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Voicemail+IntegrationMy problem is that I don't see externnotify's script being called at all in the logs, and not sure if I miss something here! In Voicemail general I addedpollmailboxes =

Hello, We have a mixed environment here consisting of a number of Avaya PBX systems, a group of Cisco Call Managers, an H.323 gateway on a Cisco router, and an Asterisk server. The PBX land is connected to the VoIP land using the Cisco router/H.323 gateway. The Asterisk system is running code from the CVS tree from around mid Oct 2005. The OH323 driver on the system is from inaccessnetworks,

I am experimenting with oh323 channels and h.323 gateways and a Cisco CallManager. I am not using a gatekeeper at this time. Is it possible to place calls coming into Asterisk from specific peers into specific contexts? In iax.conf eaxh peer has a context in which I can specify the context an inbound call will be placed in. I don't see anything like this in the oh323.conf file or the oh323

Hi, I was able to work out SIP trunk between Asterisk and CCM 4.x without any issues. Whereas SIP trunk in CCM 5.x is not working with Asterisk. Asterisk is sending OPTIONS messages to CCM 5.x for which CCM is not replying. For the same reason Asterisk is marking it as UNREACHABLE. Anybody got Asterisk and CCM 5.x intergation working. How can I fix the problem which I'm facing with CCM 5.x?