similar to: Questions about alarm reporting in Asterisk

Hello, I am missing any description of zaptel/DAHDI alarms. The TE200 series user manual contains only a description of LEDs states. These alarms states are visible in zttool/dahditool or in astersick CLI (zap show status) and I wonder what is the real meaning of these alarms for E1 channel. Possible alarm states (based on zaptel.h 1.2): 1. No alarms 2. Recovering from alarm 3. In loopback

Folks, I really hope you can help me here - I'm beginning to tear my hair out! About 10 days ago my company moved to a new office. As a result of this, we've plugged our PBX box, which has happily been running for the last three years, into our new E1 line. Since then, I've been seeing intermittent yellow alarms. Obviously, since this was working fine in the old office, the thing to

We are running Asterisk version 1.4.23-1, libpri-1.4.9 and zaptel-1.4.12.1 and two Digium TE220Ps. Debugs are set to 10. We have a T1 PRI connected to the telco. Over the last 4-5 days, we have getting Yellow/Red alarms coming from the T1 PRI. The other two ports in use are connected to internal test switches (Avaya Legend/Avaya Definity), and are not showing any errors.

How would you categorize a Yellow Alarm sensed by the Asterisk side in a Legacy PBX integration? We have a Mitel SX200 connected to an Asterisk(1.2.4) with a TE110P. Twice today (first time in over a month) we received a Yellow Alarm on the TE110P. I have been able to clear it easily by restarting zaptel. Thanks in advance! -------------- next part -------------- An HTML attachment was

About every hour I see the yellow alarms on all or a number of channels of my PRI which is connected to the dutch telephony network, Asterisk keeps on working fine.... Here's an example where channel 1-24 went into alarm: WARNING[90124]: File chan_zap.c, Line 4139 (handle_init_event): Detected alarm on channel 1: Yellow Alarm WARNING[90124]: File chan_zap.c, Line 4139 (handle_init_event):

Hi everyone! I have a Digium Card TDM410 But, it appear for me this massege chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm But my line is ok! But sometimes it back sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 But it again back to red alarm. What can be happen? My lines is all ok! But when I put on Digium Card TDM410 is very inconsistent

Hi all, any body can tell me why i am receiving this message in my sever ? I have running * with 10 Digital Lines, but i am receiving a lot of times this message . Is a software issue or is a hardware issue ? Regards. Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:2672 handle_uc_event: Unicall/5 event Alarm Mar 27 12:58:24 WARNING[2586]: chan_unicall.c:3091 handle_uc_event: Unicall/5 Alarm masks

Hi, Ok, I put the new TE410 into our system last night - This is the second TE410P card. There is also TDM400P in Slot 5 with IRQ 9 which is shared with aic7xxx (SCSI) According to "cat /proc/interrupts", the new card is in the second slot using IRQ 11 (the first card is in slot 1 on IRQ 10 - but always has been). With only the original card install, there has been no issues with

I found one of UPS has a ups.alarm : Battery charger fail! Internal UPS fault! Is there a way to monitor for this kind of failure? In upsmon I did not find and event type for alarms like this... Thanks Adam Pribyl

i get this message with a red signal on TE110P card: ***************** TE110P: span configured for... Calling startuo (flug is 4099) wcte1xxp: Setting yellow alarm ***************** what does mean ? thank you :)

Has anyone successfully hooked up ADT or Brinks home alarm system to say a analog port or SIPURA through Asterisk? TIA -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060321/9ae9407e/attachment.htm

We are having line noise issues in our Asterisk to legacy PBX integration. All SIP calls originating from IP phones sound crystal clear. All calls that originate from the legacy PBX (Isoetec 228) and route through the Asterisk and out SIP have a lot of line noise. I believe I have it pinned down to these Blue Alarm errors that I can see on the legacy PBX side. zttool shows no alarm but when I

Hi list, Sometimes I receive a Red Alarm in my E1 trunk (E&M immediate start signaling), and just few seconds after this, all alarms are cleared. This problem ocurrs many times/day, and if are calls in progress, these calls just hang-up. Could it be an asterisk bug? Or may I contact the PSTN provider? Thanks Eduardo

Hi, I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines (mISDN) connected on it, everything runs fine. I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1 module of 4 lines. Already had with this machine an RMA on both cards as they was faulty and crashed the server. What happends is that when I connect cables on the HA8 modules (those cables are unpluged

Humm, if I put a filter in this lines, maybe back? 2016-01-05 12:36 GMT-02:00, Ryan, Travis <RyanT at oscarwinski.com>: > >> -----Original Message----- >> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- >> bounces at lists.digium.com] On Behalf Of Vitor Mazuco >> Sent: Tuesday, January 05, 2016 9:21 AM >> To: Asterisk Users Mailing

Hi list, I'm getting an error on a E1 link to the telco, after some weeks of operation without trouble. I have an asterisk with a TE405 in passtrough mode: two E1 are connected to the Telco, two E1 are connected to 2 Siemens PaBX. Only 15 channels are used on each E1 (conf is attached).The system has been in production for nearly a year, and does work flawlessly for weeks, then I

We need to monitorate the E1 with nagios, somebody did this? any ideia? Thanks in advance! -- Atenciosamente, ------------------------------------------------------- Dario Quiroz (71) 9275-9080 gtalk: darioquiroz at gmail.com ------------------------------------------------------- -------------- next part -------------- An HTML attachment was

Calling out on PSTN over a TDM400P seems to generate a Red Alarm - whatever that is. I have another extension on the PSTN, and I can dial out over that. zttool shows no alarms. asterisk*CLI> zap show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard TDM400P REV I Board 1 OK 0 0 0 CAS Unk YEL 0 db

Hi folks, In the company where i work, we are implementing a security standard. A part of this is a log monitoring and reporting software. There are a few requirements, that the software must fulfil: - It must be capable of collecting logs from different devices (Linux machines, network equipment, ...). - it must be capable of sending alarms on security events - it has to generate daily (weekly,

Alarms Span RED wildcard X101P Board1 OK wcusb/0 0 ive got my asterisk server up and running and working correctly, the first time after a reinstall and reboot everything was fine - i had both alarms OK and i could get the USB extension ringing when i ran the house number from my mobile. as soon as i tried again i got a red alarm on the wildcard board. now im using the sample