similar to: Cisco 7970

Hi Everyone, Is it possible to have a SIP Phone work remotely if it's behind a Router performing NAT without connecting the Router to a VPN? The Asterisk Box will be in the DMZ. Thanks Dan CYTEXONE ---- Dan Levine dan@cytexone.com CYTEXONE | Your Technology Specialists R 877.CYTEXONE x 810 212.477.0990 x 810 212.208.6889 FAX 502 Laguardia Place, Suite 2B New York, NY 10012

We've just started testing with Asterisk (CVS HEAD) and a pair of Cisco 7940G phones running the SIP 6.3 firmware. One issue that we've run into is the ability to have multiple calls ring to the phone. Our scenario is that the user is using an extension and another call comes in for that extension. We'd like to have that second call ring the second line -- the same extension is

Apologies if there is a cleanly written and searchable FAQ that I could be directed to. I have no problem to RTFM if I can find the FM... Does Asterisk currently operate under RH9? I have IBM Netfinity 4000R servers that do not support X windows under RH8.x and I prefer not to go back to RH7.3... BTW, where would I find a useful FM? David -- David J. Sussman, MBA email:

We have a customer considering migrating from a large Nortel PBX with a third-party voicemail system to Asterisk but one of the features they really like is the automatic synchronization of voicemail between Exchange and their voicemail system -- delete a message from the voicemail system and it is deleted from their email inbox and vice versa. Searching has not revealed anything like this

I've got a Cisco 7970 that's not completing its network registration to Asterisk. The "Registering" message stays on the screen (with the moving time wheel). After a few minutes, the onscreen message flashes "Updating CTL" then "Loading...", then the status messages update with: No valid CAPF server File Not Found: CTLFile.tlv No CTL installed

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

Hi Everyone - I just got my hands on a Cisco 7970 and was told that I should do a factory reset before trying to configure it to work with Asterisk. After the factory reset, it will not boot at all, instead sits with the line button lights flashing one at a time in sequence. I have had no luck trying to figure it out - anyone run into the same problem that can lend a hand..? Thanks

Hi All I'm trying to get my 7970 working on the latest head version of Asterisk without success, perhaps someone could help. I'm using the head version of Asterisk with the chan_sccp from berlios.de dated 7th August. The compilation of chan_sccp seems to have worked without any problem, however I'm pretty sure the problem I have is with the config files in TFTPBOOT:- With the 7970

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,

Dear Asterisk People, I am having problems putting a SIP image on a 7970. I was wondering if anyone can help? First problem is the phone is running version Load IDJar70.2-5-47-17.sbn Boot Load ID7970_64054100.bin Version5.0(0.6S) So I did read that you couldn't simply put the latest SIP image on such an old phone and a newer firmware version should be used. I got

Hello Everyone, I'm trying to add a Park Button to Cisco 7960G phones connected to an Asterisk box. Does anyone know if this is possible? I'm concerned that our customer will not understand that they have to dial #700 to park a call. Are there programmable softkeys in the Cisco SIP software? Thanks so much Dan ----- Dan Levine CYTEXONE | Your Technology Specialists t: 877.CYTEXONE x

Ok I've got SCCP running I have my 7970 firmware files. Can anyone send an XMLdefault config and an SEP config file? There are a bunch of sbn files in the package...not sure what needs to be loaded. -Darren

Can anyone point me to the location of the 7970 SIP image? I'm logged in thru my CCO acount with my smartnet contract and cannot find it anywhere..... I know that a bunch of people have it at this point...how'd they get it? -Darren

Currently sub(perl=TRUE) allows you to specify \U and \L in the replacement argument so that the rest of the subpatterns in the line (the \\<digit> things) will be converted to upper or lower case, respectively. perl also also has a \E operator to end these case conversions for the rest of the subpatterns (so they retain whatever case they had in the original text). For symmetry's sake

We have 4 employees and we're running Cisco 7970 phones. Each phone has a unique SCCP line configured (in the autologin area of the sccp.conf file) for each employee. We have hints set up in the extension.conf file like the following: exten => 101,hint,SCCP/101 exten => 102,hint,SCCP/102 exten => 103,hint,SCCP/103 exten => 104,hint,SCCP/104 We have speeddial= lines set

Hi list, I have bought some Cisco 7941G-GE IP phones and want to use them with asterisk. Before bying I tested the whole setup with three different models of the old 79X0 series (a 7912, 7940 and a 7960). Flashing the formerly provided SCCP-Image to SIP was no problem, but now it complains about a nonexistent CTLSEP<mac>.tlv file. Most of the howtos say something about an empty file but

Hello @List, i'm using a Cisco 7970 / 7914 phone with Asterisk 1.4 & sccp part of my sccp.conf type = 7914 (Cisco 7970 with 7914 phone extension) autologin = 117 description = Test speeddial = 10,Test (10),10@mycompany my speeddial line is for internal call howto call a external number eg. +xx467584933 ?? i want to press a button and call directly out thank you greetings, Daniel

Hello Everyone, I want to start using Asterisk with Cisco IP Phones 7960 / 7940/ and 7905. Any info or help is appreciated. I know I'll have to use SIP but if I want to use the phones off site meaning from my home for example, how can this be done? Also, regarding external lines what are the options for Asterisk? Thanks Walid -------------- next part -------------- An HTML attachment

Hi, Does anyone know how to define speeddials in XML for the 7970 sip firmware?. I've played with the SEP<mac>.cnf.xml file that was posted previously but can't find a way to do it. I can define them on the phone usually (seems a bit buggy) but if the phone reboots they get lost from the config. Does anyone know a way to do this? I'm guessing it could be within the

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal