similar to: SIP incoming distinctive ring

We have a client set up with an Elastix 2.5 install running Asterisk 11 and 2.11 using Aastra 6731i IP phones. The client would like to have the feature where all internal calls use a distinctive ring (alert-info) so it sounds different than incoming external calls and they want it to check if the extension being called is on another call. If they are on another call, the client would like an

I've done the unspeakable. I took a working setup of 1.0.5 and upgraded with the latest cvs. with 1.0.5 distinctive ring worked great. with the latest cvs, it doesn't seem to work with my sipura 2000 (the only thing i have to test it with). I can see in console that its sending the info, but its not working? i realize the likely hood is I messed something up somehow during checkout or

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Steve Edwards <asterisk.org at sedwards.com> schrieb: > You can fiddle with the ring tone by phone specific configuration and > phone specific SIP headers (sipaddheader(Alert-Info: ...)). > > These seem relevant: > > http://www.voip-info.org/wiki/view/RTTTL+melodies+for+ST2030 (the > discussion looks relevant as well). > >

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Hello List, So I have a few MiTel 5224 IP phones running in SIP mode. Per the phones documentation they honor SIP distinctive ring tones. I am able to send the correct ALERT_INFO message in an invite from Asterisk to the phone, but I don't know what ring tone to call. From the reading I've done the syntax is: [3155791234] exten => s,1,Set(_ALERT_INFO=Ring 8) exten =>

I have been looking into how to setup distinctive ringing on a SPA-2100. So far the only thing i have been able to find is how to define a distinctive ring in the spa config. What i cannot figure out is what SIP message i need to be sending to it in order for it use the ring. I did find out how to add the sip message for distinctive ring i just dont know what variable needs to be passed in order

Hello List I have searched the lists, the wiki and the handbook and see how to use distinctive ring inside however I can't find incoming. I have 1 x100p and 2 phone numbers, My Voice calls are normal ring, my Fax are short short long. How do I tell * to route the call to an extension based on the ring candance? Is it possible? Right now it seems when the x100p sees the short short long it

BOFH told me he uses it to listen to his co-workers > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith > Sent: Thursday, February 09, 2006 12:27 PM > To: asterisk-users@lists.digium.com > Subject: SOLVED: Re: [Asterisk-Users] Polycom IP501 with Asterisk - > distinctive

This feature also works on the IP301 phones. The obvious caveat is that it is one-way only. Still nice for an "all-page" though. -Jonathan > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Andrew Kohlsmith > Sent: Thursday, February 09, 2006 12:27 PM > To:

I am trying to get distinctive ring to work on my PSTN with no luck. I can get 2 different ring codes but it skips the context assigned... here is my complete zapata.conf: [channels] signalling=fxs_ks usecallerid=yes rxgain=1.0 txgain=1.0 language=en context=default usedistinctiveringdetection=yes dring1=134,0,0 dring2=137,0,0 dring1context=internal2 dring2context=default

The answer is yes, I think, but I don't recall precisely how off the top of my head, and I'm walking out the door in a moment. The phone will hold more than a dozen distinct ring tones which you can create for yourself, and you can have asterisk direct it to use a ring tone independently of line appearance. The most direct way would be with the SIP Alert-Info field, but the phone itself

> Hi Steve! > > Thank you very much! > It seems to run! > > I wrote that: > > exten => _00493513333333,n,Set(__ALERT_INFO=Bellcore-r3) > exten => _00493513333333,n,SIPAddHeader("Alert-Info:< http://www.notused.com > >\;info=alert-external\;x-line-id=0") > > and the phone rings with another melody. > Very curious is, that if I

Hi, I use Asterisk at home to filter the annoying people before they get a real voice. So basically if you don't know the extension of one of the occupants you have no choice but leave a message. Works well... perhaps I miss some improtant calls, but if you leave no message it must not be important! Anyhow, I would like to be able to make the phone ring distinctively depending on who the

I am trying to get distinctive ringing going again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But

Hi All I have just upgraded from Asterisk 1.2 to 1.4 and am having trouble with with one of my ATAs not ringing. Basically, when I execute the Dial command, an error occurs: "Got SIP response 400 "In alert-info header: Empty value expected" Now in 1.2, I just issued the following command to overcome this problem: Set(_ALERT_INFO=). Now in 1.4, _ALERT_INFO is deprecated, so I

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

In the archives, I have found discussion of detection of incoming distinctive ring patterns dating back almost 2 years, but I have not been able to figure out whether it is partially functional or even whether it is definitely planned. When I call Asterisk with a distinctive ring, it

This is a problem that is completely stumping me, and my understanding of Asterisk dialplans tells me this should never be a problem. Moreover, this scenario works on Asterisk 1.4 but not 1.6. We have a customer with several Aastra 6731 phones. They want incoming calls from the PSTN to work and they also want to be able to call each other "internally" on a special non-DID number (like