similar to: SIP->h323 problem DTMF

What is the configuration of H323.conf and openphone in order to run openphone and asterisk together ?

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Hi, I just installed OH323 Plugin and im now tryin to make simple Configuration to connect Openphone and Xlite to my Asterisk-Server. All works fine, i just wanna know if there's a better way to do it? Is there anything wrong with my Config? OH323.conf [general] listenAddress=0.0.0.0 listenPort=1720 connectPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=8000 udpEnd=8005 fastStart=no

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Folks! I would appreciate if someone could send me a simple working h323 configuration file oh323.conf that is part of asterisk@home installation. I have tried to use the oh323.conf content listed on WIKI but it is just not working as my H323 endpoint ( PA168 based ATCOM Phone) cannot register. I need a working example of this file for similar phone. Seshu

Hi all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hello I am a newbie to Asterisk. We have set up Asterisk on a PC with Redhat 9.0. We have installed H323 openphone on our PC's. We are wondering what a gatekeeper does. It seems we need one but what I have seen in this group is that a gatekeeper must be installed on another box on the network. As all our PC's on the network use Microsoft OS is there a free gatekeeper software for

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

I'm having a small issue with the oh323 implementation when it comes to codec selection. Version info: CVS Head 6/30/2004 OH323 0.6.3 OpenPhone for windows version 1.8.1 Asterisk is configured as a h323 endpoint which either terminates to the PSTN locally through a PRI or terminates the h323 call to an IAX provider remotely. Asterisk also has G729 licences installed. in oh323.conf we

hi all, i have one (teles) pbx with a BRI telephone and an outgoing E1 port. The outgoing E1 is connected to an pri_net port from my *. The incoming call will dail out to a h323 soft phone like openphone or sjphone or just netmeeting. The call will be conneted, but i don't hear any sound, from no one of the both sides. Can somebody help me? Thanks, Thomas.

Hi, I run asterisk with oh323 plugins.It runs correctly with sjphone H323 Gatekeeper. But When i run openphone it doesn't recognize my asterisk server like a gatekeeper !! What is the problem ? Thx

Hi, I'm trying to get H323 support using asterisk 0.4.0 Unfortunately the pwlib and openh323 versions mentioned in the asterisk-oh323 readme file are no more available, and I had to use newer ones. Now I installed all libraries, but got a segemntion fault when starting asterisk while reading the chan_oh323.conf file. When I declare more than 9 gwprefix I get first a error "out of

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Hi there. I am trying to connect Asterisk to a local danish ip-telephony provider. But is having some difficulties. First I thougt they were related to the provider. But then i started debugging on the Asterisk (aix2 debug) When I make a call using AIX to the provider everything seems to work just fine: *CLI> -- Accepting AUTHENTICATED call from 192.168.1.150, requested format = 1024,

After much reading and fiddling - I have the gnugk GateKeeper running and can make calls from the H323 phone to the sip phone. Voice works bi-directionally.. Calling from SIP to H323 gives me a problem... Both gnuGK and Asterisk are on the same box. Someone said this was OK. Others said No. I added a second IP (eth0:1) and told gnuGK that was HOME. How do I lock asterisk to the other (eth0) IP -

> http://www.speakfreely.org/ > > I think this would be one of the best real-world tests of the speex codec. > This software doesnt use ACM or directsound api's but uses straight C code. > I was thinking the speexenc/speexdec should be easy enough to add. The last time I looked at this it was still very much old news - mostly half duplex audio, does not adhere to any

HI all, Any of you having experience with voice master? I tried using the openh323 channel it doesn't give me voice at all. THere's no packet coming in. There's no problem with any other equipment but voicemaster doesn't send voice at all. Funny thing, i have an old version of OpenPhone, it's working. So please if any of you knows this problem, please share. THx a bunch

hello i was searching for solution to problem (sip->h.323). any one from this list asterisk mailing have any idea how to fix it. i am getting error when i try to call from sip to h.323 user i am successfully registering my asterisk box with gnugk. but when i try to call to h.323 openphone on working on GnuGatekeeper, asterisk is not routing it to GnuGk. i am getting the following error. do