similar to: Hunting S(n)IPs

All, I upgraded to the [*] stable release branch. When I call into the box (confirmed on 2 installations) the caller no longer hears the ringing. The CLI confirms that extensions are being 'rung'. Whassup? Willy Willy Wouters ypOne Publishing

All, When calling an invalid number using, I expect to hear: "dooh-deeh-daah We're sorry you have reached a number which has been disconnected ..." And that is indeed what I hear when I dial out from [*] using analog FXO, or VoicePulse or NuPhone. When I dial that same number trough the T1 / PRI interface however, I continually hear ringing, and then the call gets hungup. Any ideas

Hi All! I have two [*]s, and both work OK as a simple local PBX. Now, I try to link them using IAX. Let's call those babies a1 and a2. From a1, I want to dial a phone connected to a2. Both boxes have a fixed IP address, and use standard port 5036, say a1.mystrx.com and a2.mystrx.com. Where I (obviously) get confused, is when it comes to inbound, outbound, registration, etc. Taking a hint

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi. I'm getting the following error at random intervals on my TE410P with Asterisk CVS-03/30/04-11:49:01-CEST. I have two spans active, one connected to my Telco, the other to a Siemens PABX. Both spans display this behavior at random intervals. All calls are dropped when this happens. Spans are not necessarily in use when this happens.

So a guy shows up at the the office, after making an appointment with the office manager / receptionist to talk 'phone systems'. After her eyes glaze over, with him talking T1 and Frame-Relay I get to see him. He's from Norvergence. Well dressed. Tells me they can do a T1 for $79, with unlimited local & long distance for free. It also does 'internet'. 'Just give me

I have one SIP extension that can't logon to voicemail. The log file says -- Incorrect password '3213' for user '4035' (context=other) even though the context in voicemail.cnf says 4035 => 3213,Bill Smith Thanks! Paul Mahler mail:pmahler@signate.com phone: 650.207.9855 fax: 877.408.0105 -------------- next part -------------- An HTML attachment was

Hi All I have a snom 200 phone here which works perfectly when using the handset to playback the voicemail messages etc. However when I play back the voice using the speakerphone it sounds choppy. Anyone had this problem before? Regards Mark

I have the voicemail setup working in that I get the MWI and it emails the message correctly. When I pressed the MWI button on my SNOM 200, it dials into the voicemail system and prompts me for a mailbox and password. I know there is a way to automatically connect directly into the mailbox via the extension.conf file, but I can not find the documentation I am looking for in reference to variables

I've been to the WIKI and I've searched the archives. Is anyone on the list successfully using iconnecthere behind NAT? I was, for over a year, and then I changed my "plan" with them. Now all my calls get intercepted immediately, "We're sorry, but your account is temporarily unavailable." Incoming calls work just fine. I contacted their so-called

Hello All, I am getting a set of errors when I boot Asterisk that I have not been able to solve. What is causing these error(s)? Asterisk boot output: ============== Asterisk CVS-04/10/04-21:44:51, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= [

When people call into my * box over the T1 interface, they get no ring tone. It rings the SIP phone and when the SIP user picks up, both parties can hear each other ok, its just the PSTN user calling in hears no ring. What could be causing this? I tried setting immediate to yes in zapata.conf, but that causes my DNIS and CallerID to stop being available. T100P with E & M Wink start

My PRI is being reset at least once a day with the following errors in the logs. zaptel, zapata, libpri, and asterisk are from CVS this morning.. This has been happening for weeks on all versions (including -stable). the T100P card appears to NOT be sharing an IRQ. xenon# cat /proc/interupts CPU0 0: 1203977 XT-PIC timer 1: 3 XT-PIC keyboard 2:

Firstly, let me just say I am new to asterisk and if anything I've said is covered in an FAQ or in previous posts I apologise but I have tried searching and I've attempted a few of the things I found but they didn't help. Has anybody got any experience using an X100P on an NTL phone line in the UK (I'm in an ex Cable & Wireless area if that makes any difference). The

Greetings, Below is part of the contents of my extensions.conf file. exten => s,1,Wait,1 ; Wait a second before answering. exten => s,2,Answer exten => s,3,ResponseTimeout,10 ; Set the amount of time the user ; has to make a selection. exten => s,4,DigitTimeout,5

Hi all .. Maybe I am just missing something, but when I press '0' and then '3' to record my name, it gives me an 'after the tone .. '. Then I say my name and press #. It says: your message has been saved. So HOW do I listen to my recording, make sure it sounds OK, and then CONFIRM that is what I want the mailsystem to use OR CANCEL out and leave things the way they are?

Don & others, Thank you for your answer. The fog maybe lifting ;). The zaptel.conf file has the following in its comments: # # The timing parameter determines the selection of primary, secondary, and # so on sync sources. If this span should be considered a primary sync # source, then give it a value of "1". For a secondary, use "2", and so on. # To not use this as a

Here is what you should write in extensions.conf: exten => _5.,1,Dial(IAX2/iax-a2:secret@a1.mystrx.com /${EXTEN}@inbound-calls So when you will dial anything beginning with 5, the call will be dialed in the context inbound-calls of a1.mystrx.com -----asterisk-users-admin@lists.digium.com a ?crit : ----- Pour: asterisk-users@lists.digium.com De: willy@yponeinc.com Envoy? par:

Recently, I decided to pull out a new model laptop for testing related to my job at work. Dell Latitiude E6400, BIOS A14. Normally I have it set to boot CD, USB, Net, then HDD and noticed that with PXELINUX-4.02 and 'LOCALBOOT 0', it hung on me before leaving the PXE stack. I then tried 3.86 and it worked. 4.00 and 4.01 both hung when I tested them as well. Changing to 'LOCALBOOT

Being bored to death by these long weekends with nothing to do? **** Why not go bounty-hunting? **** There are some feature requests in the bug tracker with monetary bounties attached. * Windows manager * FreeBSD Zaptel drivers http://bugs.digium.com/bug_view_page.php?bug_id=0000847 * IAX incoming/outgoing limit * 2B channel transfer on PRI * MGCP media gateway support All of these have

Hi Has anyone heard of solutions for implementing call-hunting over a bank of gsm lines / sim cards? We wan to have a single gsm dial in number for access to asterisk. Only solution I know about is HP's opencall which is very expensive. Apologies if this is somewhat off-topic. Thanks Eric Smith