similar to: Zapateller issues

Been tinkering and found Zapateller appears to be answering when I didn't expect it to. I have something like so: [incoming] exten => s,1,NoOp ;Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Dial(${RING},20) ... I have a 1x1 analog * installation with a couple IP phones too. I've got the FXO interface connected to the home phone line. When I get an

I am having issues with Privacy Manager and Zapateller. If I set callerid="" on a sip user zapateller sends the tones If I set callerid="Anonymous" <8475551212> zapateller doesn't send the tones If I call from a phone after dialing *67 zapateller doesn't send the tones In the last 2 cases, the display on the phone shows -Blocked Call- PrivacyManager always gives

Hi all, I'm looking for some rudimentary insight on GotoIf() which seems to be failing on me in my dial plan. All I basically wish to do is block a particular caller. Sounds easy enough, but my ternary operator/plan currently is not properly being implemented. Can anyone spot where I'm being a momo? All extensions get forwarded to the following macro: [macro-forward] ; arg1 = phone

I am looking to install a web interface for Asterisk to transfer calls and look who's on the phone. If anybody has a working web interface please let me know. I installed the www.asternic.com (operator) But when I bring up my web browser it says transferring data and does not bring a browser. -----Original Message----- From: asterisk-users-admin@lists.digium.com

I am attempting to write in incoming context for calls. 1. If the caller id is given and it is not black listed it will Playback a greeting and then right the phone or go to voicemail under busy or unavailable conditions 2. If no caller id is given, then Privacy Manager will ask for the number. I am testing 6145551212 to see if the black list will work 3. If a caller id is given, and it is

Hey all...I'm just getting my * setup and right now all I have is an FXO but no FXS. I wan't to get rid of telemarketers by having * pick up the phone if there is no CID present, give the caller the Zapateller tones and then ask the user to input their phone number via Privacy Manager (yes I realize that this won't get us any where given that I can't re-ring the phones without FXS

Is it possible to give a caller three goes at an extension number then hangup? exten => s,1,Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Ringing(1) exten => s,4,NoOp(${CALLERID}) exten => s,5,SetMusicOnHold(random) exten => s,6,Background(silence/1) exten => s,7,Background(thank-you-for-calling) exten => s,8,Background(silence/1) exten =>

Does anybody know why I get this error when using zapateller: WARNING[1209214400]: File rtp.c, Line 327 (ast_rtcp_read): RTP Read error: Resource temporarily unavailable It's scrolls until a sound is recived from the line, then it plays the zapateller tones. /Mike

Hi all, I have the following in my extensions.conf: exten => s,4,GotoIf($["${CALLERID(number)}" = "8585979857" | "8585970327"]?15:5) The numbers listed above are known spammer numbers. However, when I call from any other CALLERID, it still directs me to s,15 which is the Hangup() application. Here are logs from the asterisk CLI: -- Executing

My Asterisk fax detection used to work, but no longer does. OK. So, here's the deal: 1. It appears that the "faxdetect" command cannot be applied channel-by-channel in zapata.conf anymore, as Asterisk appears to the last "faxdetect=" command to ALL channels. 2. My stations are detected and sent to the proper extension; i.e., when I send a fax from one zap extension

Hello-- I've been playing with the privacy options on my home/home-office system since August last year, and have some results, gleaned from my CDR records, which over the last 13 months, number a total of 8672, which includes incoming, as well as outgoing calls. Before I start spitting out numbers, let me note that with the current setup, I haven't had to tell a single telemarketer

Hi list! I'm trying to get PrivacyManager working but for some reason it always thinks that CallerID is present (when it isn't). I get this on the console: == Primary D-Channel on span 1 up -- Accepting voice call from '' to '0711234567' on channel 0/2, span 1 -- Executing Ringing("Zap/2-1", "") in new stack -- Executing

Hi. I'm new to Asterisk and have been working on setting up a development server but have gotten myself a bit confused. I'd like to implement the following logic for calls coming from the PSTN: Check for caller-id yes => keep going no => play SIT and prompt for telephone number Check time of day to see if it's day / night day => ring some phones

Hi, I have been using Zapateller with a TDM400 no problems at all, but recently I have ported our BT number to a VoIP provider, and have a strange problem. When I phone our number I first get the BT unavailable three tone sound, and then it actually connects the call via IAX2. So, I disabled zapateller in the dialplan and tried again. Would you believe it worked fine. Has anybody else come

Hi all. I've been reading through Wi-Ki and at the extensions.conf file description (http://www.voip-info.org/wiki-Asterisk+config+extensions.conf) The author says this: "One day, someone is going to write a proper scripting language for Asterisk that can understand a simpler, easier (and more traditional) scripting syntax. All it would need to do is translate the "high

I am configuring an asterisk server and I want to test the incoming configuration with my FXS handsets. I have the FXS lines able to call eachother and they can connect out the FXO lines. I changed the context for the FXS lines to "incoming" so that they would be able to test the setup for incoming calls. For the incoming context I have: [incoming] exten => s,1,Wait(1) exten

Hi Folks, Prior to upgrading my Zaptel sources everything was working fine. I have a X100P connected to my analogue line. The handset port of the X100P is connected to my desk phone's line 2 input. When the analogue line rings I see the CID on my line 2 but not from Asterisk on line 1 via the Cicso ATA. This used to work fine until I upgraded the sources. I get this when watching the

Hi All I'm tracing a very strange problem which I could reproduce with different versions up to 1.2.5 (sorry, didn't update to a newer one yet). Scenario 1: Problem does not occure. ============================= Sip Phone registered directly to the Asterisk. exten => i,1,Zapateller() exten => i,n,Playback(invalid,noanswer) exten => i,n,Hangup() Works like expected. I dial an

Hello, I have a rather odd problem with Asterisk detecting faxes. I have two POTS lines coming into the box (TDM400P). Line 1 is for voice, Line 2 is fof fax. When I set them up with channel => 1-2 in zapata.conf, all is fine, but as soon as I have two channel => definitions, Asterisk is unable to detect faxes. The fax line is not supposed to ring local phones, so the most obvious

I am trying out a new service from www.talkn.com. They use Sipura to terminate your service like most providers. They are looking at directly connecting into asterisk in the future. Right now my configuration is Talkn?Sipura?Asterisk/FXO Card. When someone calls in and get?s answered and when either party hangs up , * releases the port with out a problem. If someone calls in and * answers the