similar to: New Zealand indications.conf

In AU we have a number of different dialtones defined for various purposes. >From indications.conf: au <ringcadance> 400,200,400,2000 au dial 413+438 au busy 425/375,0/375 au ring 413+438/400,0/200,413+438/400,0/2000 au congestion 425/375,0/375,420/375,0/375 au callwaiting 425/200,0/200,425/200,0/4400 au

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

Hello list, Hope you all doing fine! I've tried to use the 'alias' directive in the indications.conf file but apparently it doesn't work.... It looks like maybe this feature was removed, because old sample for the indications.conf file have example using the alias parameter, but newer samples don't have it anymore.... also I couldn't find any ticket saying this parameter

Hi there, I have a new asterisk working in New Zeland and everything is working well except when an incoming call to the PSTN hangs up, asterisk wont hang up the zap trunk (X100P). I have found this information: http://bugs.digium.com/bug_view_page.php?bug_id=0001474 Which discusses my problem and i have made sure that i have the latest info in the indications.conf as follows: [general]

Good Morning, I'm working with a queue at the moment and I having trouble with my digits. Australia is my example. On the tiki it says for international digits, I can dump them in the "digits/au" directory. I tried that -- just because, I also made a copy in "au/digits". When the queue announces the position I it says: -- Started music on hold, class

Have a problem which can't find solution to on WIKI.. Trying to get * to use UK based indication tones. i.e. british ring, dial tone, busy signal. Have changed the indications.conf file to default to UK. However this seems to have no affect. What am i missing. Am using 1.0.3 stable. Many thanks Andrew. ---------------------- indications.conf [general] country=uk [uk] description =

Hello list, I've been experiencing choppy sound as well. The version on Asterisk I was using originally was dated 10/24/03 (I think), the problem appeared after I updated from that version. My setup is a little different though. I'm having choppy sound only on some incoming calls -- from PSTN->PBX (between spans on a TE410) and PSTN->SIP. We use Cisco 7940 handsets and we also

We are not having any luck with the E100p card here in Australia, it will work with a crossover cable to another device but will not talk to our Telco Telstra who probably have a weird implementation of an E1. Any suggestions on a replacement? Regards Mark McKibbin DCS Internet 64 Queen St Warragul Victoria 3820 Australia www.dcsi.net.au mark@team.dcsi.net.au Ph. 1300 665575 Fx. 1300 556595

I've the following setup : sip phone -> ser (auth and routing) -> asterisk with capi isdn when I call a pstn number everything works fine, but I can't hear anything till the called answer. this is the output from a test call : -- Executing Playtones("SIP/2.7.184.61-08152880", "dial") in new stack -- Executing Dial("SIP/2.7.184.61-08152880",

Hey All, Having a bit of a problem with a Wildcard X100P card. When I try to make an outbound call using the card, it picks the line up and then only dials a single digit. I've confirmed it's only dialling a single digit by listening on a phone plugged into a parallel socket. Incoming calls work fine, it's only outbound calls I'm having a problem with. I've tried

Hi all, I have been looking at the code for both the zaptel driver (wctdm.c/wcfxs.c) and the asterisk channel driver (chan_zap.c) trying to figure out how much of this that has been implemented. So far I can see that the current stable 1.0.9.1 zaptel driver don't have the SETPOLARITY ioctl that would be required to properly signal the Swedish/Dutch CLIP, but the 1.2 beta1 has this

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

http://bugs.digium.com/bug_view_page.php?bug_id=0001474 If you're from NZ and need this, please test if this is the correct setup. Add your comments, positive or negative, to the bug tracker. We need confirmations from the community to move ahead. Thank you! /O

Aqu? tienes, [es] description = Spain ringcadence = 1500,3000 dial = 425 busy = 425/200,0/200 ring = 425/1500,0/3000 congestion = 425/200,0/200,425/200,0/200,425/200,0/600 callwaiting = 425/175,0/175,425/175,0/3500 dialrecall = !425/200,!0/200,!425/200,!0/200,!425/200,!0/200,425 record = 1400/500,0/15000 info = 950/330,0/1000 dialout = 500 Sergio Serrano Revuelto Avanzada 7 Original Message:

Hello! I am trying to migrate from Teapop to Dovecot. I'm using Dovecot 1.1.14. I need to make use of the X-UIDL header so clients don't download messages they've already received. I have the X-UIDL head in the message. I have pop3_reuse_xuidl(pop3): yes My problem is the X-UIDL in the message is being ignored and Dovecot is still generating it's own. The INBOX is an mbx

asterisk-users-request@lists.digium.com wrote: >Send Asterisk-Users mailing list submissions to > asterisk-users@lists.digium.com > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-users >or, via email, send a message with subject or body 'help' to > asterisk-users-request@lists.digium.com > >You can