Displaying 20 results from an estimated 10000 matches similar to: "Réf. : RE: Réf. : Re: Fritz ISDN PCI v2 and CAPI"
2004 Apr 08
2
Réf. : Re: Fritz ISDN PCI v2 and CAPI
I tried that but it still doesn't work... I think I don't have the correct
approach. Have I to install any ISDN drivers (=modules ?) BEFORE dealing
with CAPI ?
If yes, why shouldn't I use the hisax drivers (which are kernel ones)
instead of fcpci drivers (which doesn't seems to work, by the way...)
And finally, how is it possible to link the two modules together?
As you can see,
2004 Apr 08
0
Réf. : Re: Fritz ISDN PCI v2 and CAPI
If I do that, the modprobe doesn't find any module called fcpci and is
looking for any module called hisax_fcpcipnp as it's the one install for
the isdn fritz card.
# capiinit
modprobe: Can't locate module fcpci
ERROR: failed to load driver fcpci
Maybe, I should reinstall the fritz card drivers itselves? (however, I
don't think so...)
2004 Apr 08
2
Fritz ISDN PCI v2 and CAPI
Hi,
First, here is my config: Kernel version 2.4.25 on a Fedora distro,
Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers
deal with Asterisk but I can't try to figure out to get of this issue.
As I see, Fritz modules are integrated with the kernel, so I directly
loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by
downloading archives of the
2004 Apr 23
0
Réf.: Re: Asterisk with UUI support ?
Can you put this patch on line? (I don't think it's too big...)
In my mind, the main objective is to create a special field and force
its value in chan_capi.c and check wether it goes through asterisk or
not...
What do you think of that?
Regards
----------------------
>
>jean-marie.goupil@telintrans.fr wrote:
>> OK, so I'll do that... Is there any infos I need to know
2004 Apr 16
0
Réf.: Re: Re: External access to voicemail
<FONT face="Default Sans Serif, Verdana, Arial, Helvetica, sans-serif" size=2><div>I am interested too so I think it would a good thing to post an URL (as you said)</div><DIV> </DIV><DIV>Thank you!</DIV></FONT>
2005 Mar 07
0
Asterisk & Fritz & Capi & isdn PBX integration : Can I dial out on any MSN I declare ?
Hi,
I'm integrating Asterisk to legacy PBX via ISDN router. If I want to call
legacy PBX internal extension I need to specify MSN as caller id and local
number to call.
I wonder if I can cal out via Fritz & CAPI on any msn I want, or are there
any limitations - I've read something about 5 MSNs limitation and wonder if
it still holds ?
Thanks in advance,
regards,
Rob.
2005 Jun 28
0
cheap HFC card on Bristuff vs cheap HFC card oni4l vs Fritz ISDN BRI card on CAPI
Hi,
Bristuff works great with HFC card... your compilation problem may come
from your kernel configuration...
You should check this doc, at least, for the redhat config :
http://www.automated.it/guidetoasterisk.htm
Then, installation of Bristuff works like as charm !
Bye
David Masure
-----Message d'origine-----
De : vdasilva [mailto:aquamoon@wol.co.za]
Envoy? : mardi 28 juin 2005 09:01
2005 Jun 28
1
cheap HFC card on Bristuff vs cheap HFC card on i4l vs Fritz ISDN BRI card on CAPI
Hello
I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I have
choppy sound problems sometimes, and echo problems often. I am using a 2
port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000
I read that changing to BriStuff will fix the echo problems, but have also
read other users say that the only way they solved the echo/choppy sound
problems was using a Fritz ISDN
2004 May 03
1
Réf.: Re: Asterisk with UUI support ?
right, so far, here is what I've done:
I succeed in take in a new variable the UUS1 field sent with the connection
request for incoming calls. It was quite simple afterall... (I just had to
find where the data CMSG->Useruserdata is coming in chan_capi.c)
Now I would like to know where this field is instanciated for outgoing
calls in order to control this step? I am looking for that but I
2005 Mar 15
2
fcpci - capi driver for Fritz
I've put my fire proof suit on ready to ask a question ;o)
Redhat 9
Kernel 2.4.20-8
AVM Fritz PCI
Problem 1...
i have followed instructions from:-
http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install
http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI
(Plus many many other sites found via google over the last 16 hours)
after modifying the makefile & defs.h,
2003 Nov 05
1
Asterix - Digium replacing our current key system
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=UTF-8">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
<font size="-1"><font face="Helvetica, Arial,
2003 May 14
2
AVM Fritz/Capi without suse ?
Hi All,
Has anyone had success with using the AVM Fritz PCI ISDN Card (v2) CAPI
drivers with a distro other than suse? The AVM driver is geared towards
suse, and after trying them with RedHat 9 I've not got very far. The
module compiles but dies when I attempt to modprobe it.
I've googled until I almost lost the will to live! What little
information
I can find seems to refer back to
2004 Sep 21
1
HELP on AVM Fritz with CAPI drivers for SMP RH 9
Hello,
I have been wrestling with installing the CAPI drivers for AVM Fritz in order
to use chan_capi with Asterisk.
I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers
(namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8-
avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only
single processor machines.
I've already
2007 Aug 28
1
ATrpms/Fritz FCPCI CAPI/Fedora 7
HI all,
Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the
drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/
I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying
/etc/capi.conf (removing the coment # in front of fcpci line) I received the
following error when executing 'capiinit' -
FATAL: Error inserting fcpci
2008 Feb 16
1
Fritz! Card/CAPI Help.
Hi list, i'm keen to move to Asterisk 1.6, so really need to update my
system which is running Mandrake 9.2 although it has been solid for years,
fo Fedora 8.
I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel
drivers from ATrpms
(http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and
http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm)
2003 May 27
1
Kernel Version for CAPI AVM Fritz PCI V2 / chan_capi / chan_alsa update to latest version..
Hello there
I have a serious issue with the AVM Fritz PCI V2
I have the following setup and the problem is, that the kernel freezes hard after
about 16 hours. The second problem is, that the S-Bus gets jammed as well, so
you can't even use a analog phone! on the NT
Kernel 2.4.21rc2 with ACPI Patch and of course capi
are there any reasons why this configuration should not work?
And the
2003 May 27
0
Kernel Version for CAPI AVM Fritz PCI V2 /chan_capi /chan_alsa update to latest version
Hello there
I have a serious issue with the AVM Fritz PCI V2
I have the following setup and the problem is, that the kernel freezes hard after
about 16 hours. The second problem is, that the S-Bus gets jammed as well, so
you can't even use a analog phone! on the NT
Kernel 2.4.21rc2 with ACPI Patch and of course capi
are there any reasons why this configuration should not work?
And the
2005 Jun 08
0
Fax + Fritz + Capi + detection
Hello
I'm newbie in asterisk and i have a "AVM Audiovisuelles MKTG & Computer System GmbH Fritz!PCI v2.0 ISDN (rev 02)" with CAPI Driver.
I would like install fax detection, but i don't know if i should use NVBackground detect; or CapiAnswerFAx; or other.
I don't understantd operation of fax.
Tx
ps: sorry for English i'm french
2005 Jul 27
0
echo capi AVM fritz card
Hi All,
I'm running asterisk 1.0.7 on debian sarge, and
hardware-wise an AVM Fritz!PCI Card, together with chan_capi 0.3.5.
The problem is that any inbound/outbound calls on analogue line result in echo on MY end
(the asterisk end). I've played with the echo settings in capi.conf
(mainly turning on echocancel and echosquelch, also tried playing with
rxgain/txgain) to no avail. The only
2004 Aug 11
0
Fedora Core 2 (kernel 2.6.5), CAPI and Fritz PCI
I have an Asterisk box running happily under Fedora Core 2 with a X100P and a
TDM400P, and now I'd like to integrate it to my ISDN2e connection using
either an AVM Fritz PCI card or an Eicon DIVA passive card, both of which I
have sculling around. I've successfully used the AVM card under RedHat 8.0,
but I'm having difficulty finding information on running it under the Fedora
2.6