similar to: Réf. : Re: Fritz ISDN PCI v2 and CAPI

Hi, First, here is my config: Kernel version 2.4.25 on a Fedora distro, Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers deal with Asterisk but I can't try to figure out to get of this issue. As I see, Fritz modules are integrated with the kernel, so I directly loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by downloading archives of the

I tried that but it still doesn't work... I think I don't have the correct approach. Have I to install any ISDN drivers (=modules ?) BEFORE dealing with CAPI ? If yes, why shouldn't I use the hisax drivers (which are kernel ones) instead of fcpci drivers (which doesn't seems to work, by the way...) And finally, how is it possible to link the two modules together? As you can see,

HI all, Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci

<FONT face="Default Sans Serif, Verdana, Arial, Helvetica, sans-serif" size=2><div>Finally, i will get back to a RedHat 9 distrib as I see that it works with that distribution...</div></FONT>

hello, got anybody succesfully setup asterisk with three avm fritz pci cards - using the howto described in http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO i already have asterisk working with 2 cards, by when i add third card and compile driver ( see capiinit debug below ) asterisk freeze on capi initialization.... does anybody know how to solve this ? regards Marian ------------------

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which

I've put my fire proof suit on ready to ask a question ;o) Redhat 9 Kernel 2.4.20-8 AVM Fritz PCI Problem 1... i have followed instructions from:- http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI (Plus many many other sites found via google over the last 16 hours) after modifying the makefile & defs.h,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM Fritz CAPI driver from the AVM website and compiled against the current kernel. However, as soon as I modprobe it I get: CAPI Subsystem Rev 1.1.2.8 fcpci: module license 'Proprietary'

Hi list, i'm keen to move to Asterisk 1.6, so really need to update my system which is running Mandrake 9.2 although it has been solid for years, fo Fedora 8. I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel drivers from ATrpms (http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm)

OS: Redhat 9.0 Kernel: 2.4.20-8 Asterisk: latest CVS head Hi all, I try to compile the latest chan_capi, but it won't work. I also tried the patch that is arround there from frank sautter and I have installed the asterisk header files. Asterisk is working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci

Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 system with *. If so could someone give me some pointers on getting the right sequence of installing the drivers and which versions to use. Thanks, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I added a Fritz!PCI card to my asterisk system which is running on fc2 !. I installed the avm modules (fcpci) and when i try an capiinit and a capiinfo then everything seems to be OK (you can see capiinfo and lsmod at the end of the text) !. I installed the asterisk chan_capi module and when i start asterisk and enter the command capi info on the command line i get back: *CLI> capi info

Can you put this patch on line? (I don't think it's too big...) In my mind, the main objective is to create a special field and force its value in chan_capi.c and check wether it goes through asterisk or not... What do you think of that? Regards ---------------------- > >jean-marie.goupil@telintrans.fr wrote: >> OK, so I'll do that... Is there any infos I need to know

right, so far, here is what I've done: I succeed in take in a new variable the UUS1 field sent with the connection request for incoming calls. It was quite simple afterall... (I just had to find where the data CMSG->Useruserdata is coming in chan_capi.c) Now I would like to know where this field is instanciated for outgoing calls in order to control this step? I am looking for that but I

Hi, I'm heaving trouble using two Fritz ISDN cards in one machine. I followed "http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO" and i think everything works great. cat /proc/capi/controller shows: 1 fcpci running fritz-pci A1 3.11-02 0xb400 5 2 f2pci running fritz2-pci A1 3.11-02 0xa400 10 The asterisk CLI shows: *CLI> capi info Contr1: 2 B channels

Hi Everyone, Long time reader, first time poster. FINALLY got my First AVM Fritz Card up and running under Centos 3.4 Installed the second....modified the drivers etc as per the instructions found at the wiki System boots Modprobe capi all good modprobe fcpci all good modprobe f2pci the kernel then goes into Panic If Modprobe f2pci before fcpci the kernel still goes into panic.

So I've got a PBX running with one Fritz card with the fcpci module and that works fine, but add another one and... kersplat... Kernel Panic. It boots fine with two cards, but panics as soon as the first fcpci.ko module is 'modprobe'd - I don't even get as far as modprobing the second. Any ideas on what's going on? Should I just back-up to an older version of the fcpci module

Hi, Bristuff works great with HFC card... your compilation problem may come from your kernel configuration... You should check this doc, at least, for the redhat config : http://www.automated.it/guidetoasterisk.htm Then, installation of Bristuff works like as charm ! Bye David Masure -----Message d'origine----- De : vdasilva [mailto:aquamoon@wol.co.za] Envoy? : mardi 28 juin 2005 09:01

Hello I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I have choppy sound problems sometimes, and echo problems often. I am using a 2 port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000 I read that changing to BriStuff will fix the echo problems, but have also read other users say that the only way they solved the echo/choppy sound problems was using a Fritz ISDN

Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it seems to run fine (capiinfo