similar to: Toshiba Digital Phones -> Asterisk

I found some postings from Google (notably from Mark Spencer) about successful integration of a legacy Toshiba Strata system and Asterisk. I am also facing that current dilemma. The general legacy solutions that I can come up with is very easy -- either making Asterisk a "proxy" (or frontdoor) to the Toshiba system, or have it operate behind the Toshiba via regular extensions. I'm

> -----Original Message----- > From: Dale [mailto:dale-list@lightwavetech.com] > Sent: Tuesday, January 18, 2005 1:45 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] QoS tagging - can Asterisk do this, > if not,what do you recommend? > > So my question is, does Asterisk offer the > ability to mark the voice data with the

Hi, I am currently integrating our company's Toshiba PBX with the Asterisk version 1.2.1. I bought Quad T1 card, and making the port 1 to connect to PSTN PRI (use "pri_cpe" in zaptel.conf") and making the port 3 to connect to Toshiba PBX (using "pri_net" in zaptel.conf). The first stage goal is to just adding the Asterisk relay between PSTN and Toshiba system. The

I'm posting here in case anyone else runs into this and needs some help. I'll probably update the voip-info Wiki pages on Toshiba integration in a bit. Asterisk 1.6 makes things a bit easier than what is on that page. I'm integrating an Asterisk server with a Toshiba Strata system at my office. Right now, it is driving some VoIP phones (Cisco ATAs with analog phones plugged into

Hi all, I have a potential client interested in an Asterisk PBX, which will allow them to improve their virtual office services, among other things (it's a Business Centre). They currently have a Toshiba DK-40 and 19 DKT 2010-SD phones. The owner has told me that the phones are digital (not in the VoIP sense, obviously). Is anyone here familiar with this particular PBX? Any chance that it

Alright, folks. I just deployed * into full production at my office. We have around 50 7905's, 5 7940's, and a handful of soft clients. We run a call center with around 15 agents. I also have a queue set up for the receptionists so that they don't get bombarded with calls. Everything seems to be working with a very few minor glitches. I firmly believe that the few problems we are

Hi All, I am new to both Asterisk and PBX stuff. I have 3 Tohiba PBXs in 3 separate offices as follows, Toshiba Strata dk28 Toshiba Strata dk280 Toshiba Strata dk8 I need to install 3 Asterisk servers in these 3 locations and integrate them with each of the Toshiba PBX s. This is to give IP Phones/soft phones to the users and to route these VOIP calls through the PBX to POTS. What are the

Hello, community. Several months ago Toshiba Inc. released a new communicator - "Toshiba Portege G900". All device's features are greate, but in practice things are going another way: communicator is really SLOW. Toshiba users have found that G900 is using nVidia GoForce 5500 Chip in it and it seems like it's working partially, because of an incomplete driver. We have written a

I have googled, and wiki'ed until blue. Is it possible to put T1---*----Toshiba CTX ? I have a TE405P, with one interface programmed for the T1, I am not sure how to program the 2nd port to mimick the T1 to the Toshiba. The Zapata.conf [channels] switchtype=national context=from-pstn signalling=pri_cpe usecallerid=asreceived echocancel=yes echocancelwhenbridged=no echotraining=400

I set up a TE405P to go T1---*---Toshiba. I have the channels configured, and can place calls from the Toshiba, through * to the t1. Incoming calls work great to *, but if they go to the Toshiba, I get a hangup. I think the * is sending the call to the wrong span. I have 2 spans, span 1 from the T1, span 2 to the Toshiba. The bchannels show as 0/1 through 0/23 on both spans in * when it starts.

I have recently changed jobs and I now have to administer a Toshiba DK424. I would like to integrate Asterisk with this Toshiba PBX. I am quite familiar with Asterisk but I have absolutely no idea about this Toshiba. To make matters worse the manuals for this system are missing. What I would like to do is place Asterisk in such a way that we can extend the Voicemail boxes and possibly add a few

As these problems are very time sensitive and frustrating, I suggest you document each change you make and do them one at a time so you can actually know what the problem was and not introduce new problems in the process. Find someone who is on the phone quite a bit and will give you an honest evaluation of the call dropping situation (unless you yourself are experiencing this issue too).

Deat all, I am in middle of integrate Asterisk with Toshiba astrata legacy pbx. Following is my setup *Asterisk <-> Digium TE110P <-> E1 card in toshiba pbx <-> Toshiba PBX* A =============================================> B C <============================================ D Asterisk PBX and strata PBX connected using back to back E1 cross cable. Physicall connectivity

> -----Original Message----- > From: Brian Roy [mailto:mister.roy@gmail.com] > I do this with a Toshiba Strata DK280. The model before the CTX. You > shouldn't have any problem doing this with the CTX either. Assuming > you don't have SMDI integration with your voicemail (you didn't state > that you did), you just need the phones to send trailing digits, and > you

Before studying your configs, what have you tried so far? Did you change this? Also, try changing your second span timing from span=2,2,0,ccs,hdb3,crc4 to span=2,0,0,ccs,hdb3,crc4. Here is the documentation on voip-info for why it may be the cause of your issues http://www.voip-info.org/wiki/view/Zaptel.conf+span+syntax span definition format:

I'm interested in setting up Asterisk as a voice mail system for our Toshiba Strata CTX100 PBX. Our current voice mail system connects to the PBX with four analog extensions. Does anyone have information on how to integrate this kind of system with Asterisk? I've looked at the legacy integration section of the Wiki, but it doesn't seem to have anything about Toshiba systems. ---

Hi all I have a pocketPC Toshiba e750 and I want to make SIP calls from it, but I didnt found any free softphones for my Toshiba. X lite's versions for pocketPC isnt free :( Did someone used before a free softphone for pocketPC? witch one? Thanks Joao Pereira www.fccn.pt

I have a toshiba multifunction device that can save to an smb share. For years its been saving to an windows server. I'm trying to move it to samba 4.x. My samba 4 is running an samba AD DC on a machine called vc1. The samba 4 file services is running on a system called srv1. I've made the share on the srv1 smb.conf and have been able to connect to it using the smbclient tool. I've

Dear Group, I'm running the following setup; Yoper v2, Kernel 2.6.8.1-7, Wine 20040914 on a Toshiba Satellite Pro 4600. The Toshiba has a Yamaha AC-XG. In addition I have a USB Plantronics DSP100. After some tweaking I got wine to install x-ten lite; I have pasted my config file; [WinMM] ; Wine supports the following sound drivers: ; winearts.drv ; for KDE ; winealsa.drv ; for

We've done a direct swap of an old Amanda voicemail system with a shiney new Asterisk system (Asterisk 1.0.9). The system consists of 4 FXO ports on the * box (TDM400P), and three old Wildcards we aren't using (too buggy we found). CO lines-> Toshiba -> FXO ports on * We want to branch out a little more and use it as an auto-attendant. The first problem seems to be an asterisk