Displaying 20 results from an estimated 4000 matches similar to: "Lucent Phones"
2004 Aug 22
3
asterisk T100P to Merlin Legend
Management just approved purchase of a Digium T100P and a T1 card for
our Merlin Legend Switch. I will appreciate comments from anyone
performing this installation before:
- Which T1 card did you use in the Merlin Legend?
- Did you require any special interface? (CSU/DSU, etc)
- Any items to watch during installation.
Also we will need to remove one of our old analog Trunk cards to
accomodate
2004 Jan 16
1
Asterisk Integration with Lucent Definity g3si
Hi everyone,
We have been working with Asterisk for a while now and would really
like to expand its capabilities by fully integrating it with our Definity
g3si and are wondering about other peoples experiences with similar setups.
Thus far we have only been able to achieve a partial 1 way integration, but
ultimately would love to route inbound voip calls to the asterisk out of the
lucent.
2003 Oct 14
4
Asterisk capacity
Hi,
I am really interested in the true capacity that Asterisk can handle.
What is the maximum number of users that can be handled by Asterisk on a
standard 2.4G P4 IBM server or similar? Anyone has a clue?
Cheer,
Vincent
_________________________________________________________________
ninemsn Premium transforms your e-mail with colours, photos and animated
text. Click here
2004 Apr 02
3
WiSIP Firmware Version F?
Greetings,
I purchased a WiSIP at the VON conference and am now trying to configure it
to work with Asterisk. I have read all of the previous postings regarding
the WiSIP and most of the information apparently does not apply to the
version of firmware installed on my phone (version WF.00.0F).
I cannot get the WiSIP to register with my Asterisk box. It leases an IP
from my DHCP server, then
2004 May 23
1
IAX2 NAT / Registration Issue
I have a client using IAX Phone at his office to connect to his Asterisk
located at a data center. His IAX Phone connects through his office NAT
gateway device (unfortunately I don't know the specific brand and model).
He can make calls just fine. However, he seems to have issues receiving
calls.
I monitored his Asterisk for a bit and noticed that his IAX Phone, which
registers every 60
2004 May 23
1
Aastra ADSI phone
I've received my Aastra 390 phone. I got the unlock procedure from the
vendor, and the services button now shows all four entrys as "<available>".
When I give the phone "ADSIProg()" the phone displays:
Asterisk PBX
download refused
Conflict with:
<available>
The asterisk.adsi hasn't been changed:
DESCRIPTION "Asterisk PBX"
VERSION 0x02
SECURITY
2004 Jan 19
2
Lucent and ISDN-PRI
Hi Everyone,
So I have been further exploring the integration of our asterisk server and
our lucent definity g3si system. I took the suggestion of setting up an
isdn-pri line added the two way tie trunk and the signalling group, but
can't seem to get the PRI signalling working on the asterisk correctly. I've
set pri type to network on the lucent, and pri_cpe in zapata on the
asterisk, but
2004 Jan 16
1
Asterisk Integration with Lucent Definity g3 si
We have had quite a bit of success with our T100P and TE410P cards
interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3
using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in
5ESS mode).
In the near future, I may also need to interface to a Definity via a T1. I
was planning to use PRI--is that an option for you on your switch?
-----Original
2005 Jun 28
3
Asterisk with Lucent TNT echo
I'm running SIP between my Lucent TNT acting as a gateway, and an
asterisk server. We have a PRI coming into the Lucent. Basically the
problem I'm having is mostly on inbound calls but some outbound calls as
well. I hear echo and sometimes some weird artifacting on calls coming
in from the lucent. Everything routed over IAX to VoIP Jet or Nufone
sounds fine. It seems like every 3
2004 May 07
4
Concept for line appearances and bridging: anyone?
OK, here's a configuration challenge: I want to have certain line
appearances able to be "interrupted" by various other line apperances
elsewhere in the office. This is harder to describe than it is to
demonstrate, so I'll do that:
Let's assume I have Cisco 7960's on all desks.
1) Call comes from inbound line X destined on extension 1234
2) Phones A, B, C all
2004 Jul 21
6
Astricon costs...
Has anyone really looked at the costs for Astricon. But the hotel costs.
$111.00 USD per night.. come on guys give me a break. I will not be staying
at that hotel. I can rent a car and stay near the air port for almost half
that. In addition from what I have been told their will be no shuttle
service from the Airport to the hotel.
Anyone else have any input on this?
bkw_
PS: I'm going
2004 Aug 05
3
Avaya/Lucent Definity -> Asterisk interop question
Calling all Definity admins,
Got a few questions about Definity -> Asterisk interoperability.
1) What are the options for integration? Can I hand off extensions from the
Definity and vice versa?
2) Anybody have any working configs they would like to post?
I've found and read the legacy integration on the wiki about the two
systems. I've also googled and found a few threads that were
2004 Sep 01
2
Lucent iMerge
I've read the wiki and other resources on how to connect Vonage / Voicepulse
and all these other services to Asterisk... We are attempting a connection
to a Lucent iMerge. Lucent has told us that it won't work - but we feel
confident that it will. Has anyone worked with the Lucent iMerge - or would
be willing to help lend a hand?
It is capable of H323 / MGCP. Even if I could make the
2005 Aug 25
1
OT: Are you using a Lucent?
Is anyone out there using Lucent brand equipment to handle an incomming
DS3, converting all 672 calls to SIP (as G729) and sending those to
Asterisk/SER over ethernet?
If you are and are willing to speak to my boss about your experiences
(over the phone) with it, please contact me off list.
We have a possible contract with a local CLEC to handle their long
distance, and they want to send to
2006 Feb 14
3
Fax to Email with Asterisk and Lucent TNT
Hello,
I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like
to be able to direct an inbound fax call into my TNT, have it answer
the fax and send the image file over to Asterisk, or some other
system to deliver to an e-mail address(s). I'm not sure if I need
Asterisk to any of the call control or not. I'd also like to setup a
print queue and have outbound
2003 Oct 26
2
Lucent Partner extension to X100P
Hi All...
I'm currently trying to have an extension of my Lucent Partner phone
system connected to Asterisk using an X100P. The issue I'm having is
that the Lucent Partner analog port connection have different ring and
dialtone than the one specified for US in indications.conf.
Anyone have accomplished this connection before. I need to know what I
should use for the different
2006 Nov 02
1
Lucent TNT Help
I'm looking for someone familiar with setting up some of the more
advanced features of the Lucent TNT, preferably someone with knowledge
of Trunk Groups and choosing outgoing PRI channels based on call type
and perhaps NPA-NXX
We currently have 8 PRI's. 7 of them are for our dialup pool, the 8th
is for our voip. We currently run the dialup PRI's to a seperate TNT
We want to
2003 Nov 12
8
FreeBSD
I am trying to get Asterisk to compile on FreeBSD 4.8. Per bug 389, BSD
support should be in CVS. I have also tried applying the patch in bug
374, but always get these messages:
click# make
"Makefile", line 21: Missing dependency operator
"Makefile", line 23: Need an operator
"Makefile", line 72: Missing dependency operator
"Makefile", line 74: Need an
2007 May 01
10
Digital Phones
Hi List;
Asterisk does not have any kind of cards that can work
with it to be used with Digital Phones (digital phones
differ than analoge phone and differ than IP Phones).
Anyone can advise about this as I did not find this on
Diguim
Regards
Bilal Ghayad
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
2004 Jan 21
1
Lucent Definity + Asterisk Success!
Hey Everyone,
Thanks for helping with this integration, I finally got it working!
I have inbound and outbound dialing from/to the asterisk box via a pri line!
I would definitely like to contribute this information to the wiki so we can
fill in some of the information gaps there. In the short term I wrote up
what I did and scanned in all of the nescessary screen prints from the
lucent into a pdf