similar to: Strange SIP issue (again)

Hi, after reading about it on the list I decided to set up a Free World Dialup account. For those of you who don't know, that is a sip proxy where you and your friends can singn up free and then you can just connect to it with any sip client and call anybody that is registered for free. Pretty much like iaxtel (I belive that was the name of it) for the iax protocol. It even supports clients

Hi :) I've had all this working before, but I'm revisiting it, and in short, I currently have huge problems receiving incoming calls. I've been trying with both FWD and voiptalk.org. I'm running CVS HEAD of asterisk, zaptel and libpri as of yesterday afternoon. Would someone mind helping? :) My machine is 10.0.0.1 on my LAN, but the ADSL router has 10.0.0.1 set as the 'DMZ

Hi all I use sipgate and FWD but seem not to get it going. I do not have NAT on the asterisk box (static ip). The asterisk box has 2 network interfaces. One internal and one external. Now when I make an call to a FWD or SipGate number all I get is -- Executing NoOp("SIP/113-6d2e", "") in new stack -- Executing Goto("SIP/113-6d2e",

Thanks for taking a look greg and hank. This seems to be getting bettre everyday..help please My sjphone is running on the same box as asterisk...i believe then the red hat firewall should not be a problem. Whenever i dial from CLI i get ######### Executing Goto("OSS/dsp", "default|s|1") in new stack -- Goto (default,s,1) -- Executing Wait("OSS/dsp",

Thanks for the info so far. I am still trying to asterisk'ize my ML9.2 firewall box and can't get the external SIP registration to work. If I hook up my Sipura directly to the WAN it registers OK. This is the message I get from asterisk: Mar 8 21:03:07 NOTICE[196621]: chan_sip.c:3140 sip_reg_timeout: Registration for '263872@192.246.69.223' timed out, trying again If tried

I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX

hi My stations are behinds a firewall, the system is windows 2000 & 98, i use sjphone asterisk is on the internet gateway where is the firewall Shorewall the system is linux debian (sid) kernel 2.4.20 j do whaton http://www.automated.it/guidetoasterisk.htm (grateful Andy) to write my sip.conf but i can't call an external sip user. (an external user can call me) i try without asterisk with

Hi, Is it possible to use asterisk with Free World Dialup (FWD) ? Did someone manage to make it work? how? Best, -P -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search http://corp.mail.com/careers

I have successfully configured two servers and I am now trying to connect via iax. When I attempt to call from one ext, 2006(server viop1) to extension 3006 (server voip2) I receive a timeout or "call failed 403 forbidden. The information I am receiving from the console is below. Apr 26 10:53:32 WARNING[311313]: channel.c:1745 ast_request: No channel type registered for 'IAX'

Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the

I found this configuration file on Wiki for FWD behind firewall ; SIP Configuration for Asterisk ; [general] disallow=all allow=ulaw port=5060 ; Port to bind to bindaddr=0.0.0.0 ; Address to bind SIP channel to externip=xxx.xxx.xxx.xxx localnet=172.16.1.0 localmask=255.255.255.0 context=inbound-sip ; Default context for incoming calls maxexpirey=180 defaultexpirey=160 tos=reliability

> I'm pretty sure that is incorrect. The inside_net is the ip address of > the asterisk server, and the inside_mask is the subnet mask. At least > that is how I have mine setup in my sip.conf, and it works. > > inside_mask for the internal mask would make more sense to me as well :) > > -- > Leif Madsen <leif@hacklocalhost.com> > http://www.hacklocalhost.com

Sirs, Thank you for your quick response. But when i try to make a call to FWD the following error appears: For example, when i call to 612 (a service number of FWD) -- Executing Dial("SIP/Phone4-e85b", "SIP/612@fwd.pulver.com|90|Ttr") in new stack -- Called 612@fwd.pulver.com -- Got SIP response 500 "I'm terribly sorry, server error occured (1/SL)"

I bought three plus two Grandstream BudgeTone 101 phones. The shipping cost more than the phone itself from Pulver store. The first shipping had one phone defect. Nothing on the display. (Can happen!) The second shipment had one phone with a defect display, but it still worked. The second phone's handset was defect too (microphone did not work). Changing the handset from this one to the

I have a small HUGE problem with *. I have installed * but I have 2 problems. 1 - Making call to FWD. 2 - Receiving call from FWD More info of the problem at the end. Here is the sip.conf file. ; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = sip ;default Default for incoming calls register =>

Hi forum, I have been fighting days and days configuring FWD and asterisk with NO success I have the following scenario. My sister in Spain with FWD dialup client My question is if she can dial my FWD dialup number, which is registered in Asterisk and the call being forwarded to ring my IP Phone. Spain LAN FWD

Using DIAX softphone which seems to be working OK can get to VM/echotest etc in the demo context Am trying to setup FWD but get the following problems Can hear it ringing when dialing FWD no 612 for time. Connects but no sound from remote end. Does anyone have any suggestions. Softphone on 192.168.0.2 asterisk on 192.168.0.3 Netgear RP114 doing NAT to the internet port 5060 being forwarded to

Can multiple FWD accounts be registered? I have the following output in my sip.conf file: register=74928:xxx@fwd.pulver.com/74928 register=75160:xxx@fwd.pulver.com/75160 register=74573:xxx@fwd.pulver.com/74573 [fwd-74928] type=friend secret=xxx username=74928 host=fwd.pulver.com [fwd-75160] type=friend secret=xxx username=75160 host=fwd.pulver.com [fwd-74573] type=friend secret=xxx

I'm trying to understand IAX and whether or not it would solve my difficulties: 'The primary goals for IAX were to minimize bandwidth used in media transmissions, with particular attention drawn to control and individual voice calls, and to provide native support for NAT (Network Address Translation) transparency. Another goal is to be easy to use behind firewalls.'

I can't get my Asterisk to register/place calls with FWD. Here's what I have in my SIP.CONF: register => 11111@fwd.pulver.com/11111 [fwd] type=friend secret=somesecret host=fwd.pulver.com username=11111 fromuser=11111 fromdomain=fwd.pulver.com I'm using CVS version of Asterisk, checked it out last week. I get authenticate error when registering with fwd, and all my calls to