similar to: FW: pda skype

Can PDAs be used as softphones/clients on asterisk? what i wanted to do is to set up 2 PDAs as softphone(client) which allows them to communicate each other through asterisk server(desktop) devices i have: pda compaq model 3680 pda sharp sl5500 access point desktop(asterisk) can i apply my idea on the asterisk? any guides? thanks in advance :) --------------------------------- Do

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

Since I'm new to this forum I probably I'm doing something wrong, I'm sorry if this's the case! I don't have a windows base system, solely Puppy Linux. I do have an Axim, though; can't do hardly anything useful with it since starting using just Linux. Went through many pages about WINE but failed to locate any useful info. That's the reason for posting my issue here.

Package: logcheck Version: 1.2.42 Severity: wishlist -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Here are some more messages that can be safely ignored: localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA localhost kernel: drivers/usb/serial/ipaq.c: USB PocketPC PDA driver

Hello! I''d like to gather some points about running a rails application on a PDA. As a condition I''d like to use Palm and Windows Mobile based PDA to target a huge user audience (this could be become difficult I know, only Windows Mobile for the start is although okay). I googled the last weeks and found out that there were only a few web browsers out there. E.g. Mozilla

Hi Andrew, This patch series adds to the end of the existing i386-gdt-cleanups patches: allow-per-cpu-variables-to-be-page-aligned.patch i386-gdt-cleanups-use-per-cpu-variables-for-gdt-pda.patch i386-gdt-cleanups-use-per-cpu-gdt-immediately-upon-boot.patch i386-gdt-cleanups-use-per-cpu-gdt-immediately-upon-boot-fix.patch i386-gdt-cleanups-clean-up-cpu_init.patch

Hi Andrew, This patch series adds to the end of the existing i386-gdt-cleanups patches: allow-per-cpu-variables-to-be-page-aligned.patch i386-gdt-cleanups-use-per-cpu-variables-for-gdt-pda.patch i386-gdt-cleanups-use-per-cpu-gdt-immediately-upon-boot.patch i386-gdt-cleanups-use-per-cpu-gdt-immediately-upon-boot-fix.patch i386-gdt-cleanups-clean-up-cpu_init.patch

I try to setup SJphone on my PDA, but it does not register with Asterisk. I have setup a sip account on asterisk, ... Can anybody give me a hint? bye Ronald

hello, i have a 5500 iPaq with familiar 0.8.2 on it and i don''t know how to install a traffic shaper tool on it. I installed iproute2 package i found on familiar site and for that i have the tc and ip commands, but when trying to add a qdisc, as a dummy example, i get the next answer: > tc qdisc add dev wlan0 root cbq bandwidth 100Mbit avpkt 100 RTNETLINK answers: Invalid argument

I need a new pda/smart phone that allows me to do some remote admin. Anyone know of anything that I can run a vpn and cli/ssh with? Thanks! jlc

2006/11/2, Jean-Marc Valin <jean-marc.valin@usherbrooke.ca>: > > Today I tried speex echo cancellation on my VoIP application running > > on a windows mobile based PDA (OMAP1510 168MHz). The result is > > disappointing: it takes 150-250 ms to do echo cancellation (by calling > > speex_echo_capture() ) for a 20 ms frame! > > Are you by any chance using an insane

I did the test on another PDA which runs XScale 416Mhz CPU, the EAC arithmetic could be done in 1ms, but for the previous PDA (TI OMAP 168Mhz), it take more than 100ms! Though EAC could run in time on the new PDA, it did no help to cancel the echo, here is my test scenario: Init echo_state: echo_state=speex_echo_state_init(160,1120); int tmp=8000;

Hello all, Today I tried speex echo cancellation on my VoIP application running on a windows mobile based PDA (OMAP1510 168MHz). The result is disappointing: it takes 150-250 ms to do echo cancellation (by calling speex_echo_capture() ) for a 20 ms frame! I've defined the FIXED_POINT macro. Is there anyway to do some optimization? Nick

Our asterisk server has been up and running for over a year and it works great. I have emails going to my account as an attachment and I can listen to them on the desktop and it works fine. I just got a T-Mobile MDA that runs Windows Pocket (or whatever they call it) and it can check email. If I have it download the email, it gets the attachment, but it can't seem to play it (it CAN

Hi I'm new with ogg and also with using third party libraries. I'm making a C++ PocketPC program and I need a simple wav->ogg encoder function. But as I have tried to use ogg vorbis libraries I don't know what or how to use them. I think that best way would be to use libogg 1.1.3 and libvorbis 1.1.2. Do I even need both of them, since I only need to have capability of

> Well, I thought about it as well but up to now didn't try. Via which > way do you intend to have e.g. a line-in to the iPaq with reasonable > quality. Would be really interesting to figure out such things ... > and then use a WLAN-cradle to transport data to the internet *g* The main use would be covering events at sports fields, auditoriums, etc. that are away from the

Hi Jeremy, all, Sorry this took so long, spent last week in Japan at OSDL conf then netconf. After several false starts, I ended up with a very simple implementation, which clashes significantly with your work since then 8(. I've pushed the patches anyway, but it's going to be significant work for me to re-merge them, so I wanted your feedback first. The first patch simply changes

Hi Jeremy, all, Sorry this took so long, spent last week in Japan at OSDL conf then netconf. After several false starts, I ended up with a very simple implementation, which clashes significantly with your work since then 8(. I've pushed the patches anyway, but it's going to be significant work for me to re-merge them, so I wanted your feedback first. The first patch simply changes

Does anyone know if SIP will/is support on handheld PCs such as the iPaq or Axiom? With their integrated 802.11b and Bluetooth it seems like a solution to provide a wireless based sip phone for any user would be possible. Handoff between access points might be problematic but most users I know would be using their PDA phone in an airport with free wireless or at the local cafe, etc, etc... Can

I would like to capture the lat/lon coordinates from a GPS-enabled cell phone or PDA. Is this possible? Must I subscribe to this information from the cellphone network provider, or can I capture it without charge? What devices will broadcast the coordinates? Is there a device that will broadcast its position inband that can be captured by Asterisk? Can an SMS message include coordinates?