similar to: centos 4 installed on P4 won't boot on P3

Is this because the mirrors are busy? I did update to CentOS 4.2 yesterday but now... [root at srv1 file-4.15]# yum install php-devel php-imap Setting up Install Process Setting up repositories dag 100% |=========================| 1.1 kB 00:00 Cannot open/read repomd.xml file for repository: update failure: repodata/repomd.xml from update: [Errno 256] No more mirrors to try.

Hello, I have: CentOS4.1 x86_64 directly-attached Infortrend 9TB array QLogic HBA seen as sdb GPT label created in parted I want one single 9TB ext3 partition. I am experiencing crazy behavior from mke2fs / mkfs.ext3 (tried both). If I create partitions in parted up to approx 4,100,000 MB in parted, mkfs.ext3 works great. It lists the right number of blocks and creates a filesystem that fills

Hi all, I have 2 CentOS 3.5 boxes & i do backups on the LAN Recently, I always get FTP timout error with large files "700 MB and more" . i tried to log and do manual backup with FTP command and i also got the same result "FTP timeout" i tried to google and i did # modprobe ip_conntrack_ftp but still get the same timeout message Any one can help??? Hameed

Hello all, I'm having unusual difficulty configuring teaming with Centos 4.2. The 2 NIC's are Broadcom. The HW is HP DL360 and there is no teaming driver for RHEL4 since it comes with package (says HP). Since there is no teaming driver from centos (as far as I know), I tried the Broadcom Driver, configured the team file, but the team just wont come up. A Virtual Interface should be up

I saw this on the SuSE AMD64 list & decided to pass it along, since it seems like a sneaky problem. Later posts confirm it is *NOT* AMD64-specific, nor SuSE 9.3 specific .... -- William A. Mahaffey III --------------------------------------------------------------------- Remember, ignorance is bliss, but willful ignorance is LIBERALISM !!!! -------------- next part -------------- An

Since this is National Kernel Day, I have a question. No, 2 questions: I'm running an Asus A7N8X Deluxe ver 2 m/b with an AMD processor: [root at mavis ~]# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 2600+ stepping : 0 cpu MHz : 1912.933

First of all, I just want to say *again* how happy I am with CentOS. Across our boxes and our clients boxes, we're running it on more than 20 machines at the moment and it's by far the most painless OS to administer in detail that I've ever used. (Of course, I'm an old Slak hat, but ...) Thanks so much to the community and the maintainers. We've recently run into a problem

A bit off topic, but I keep looking for an answer to this question and coming up with nothing... so I thought I would go to the gurus. :-) Can anyone recommend a good package for pinging other devices and sending an email/alert when they go down? I'm aware of all kinds of more complex things with GUIs and a zillion other bells and whistles we aren't looking for, but we just want a simple

I found this article about Microsoft SFU being built into the new Windows 2003 Server R2 very interesting. http://news.com.com/Microsoft+makes+Unix+changes/2100-1016_3-5845790.html?tag=cd.top What does this signify? Is Windows ready to really co-exist with Unix / Linux ... or are they going to try and provide similar functionality because they recognize it is better technology moving forward?

I've got an odd problem. My server will not shutdown normally because the AoE driver is not being shut down properly. While investigating the problem, I found that the aoe script is apparently not being called for shutdown. I have been able to duplicate this with a brand new test script. My test script is just a simple file that echos back the start or stop command: #!/bin/bash #

.... does anyone onlist have any 1st-hand experience (good or bad) w/ DirectDial.com for procuring computer components ? Thanks in advance :-). I am interested in them as a potential source for parts to build an Opteron box running Linux, probably CentOS, to bring this slightly on topic .... -- William A. Mahaffey III ---------------------------------------------------------------------

Hot on the heels of the success of getting sound to work with FireFox, I am on to getting Java applets to run. When I go to a page with a Java applet, I get the little Rubik's cube- like icon that says I can click to download. So I do, but FireFox says it can't find it, so I have to install manually. I click on Manual install and I'm taken to a page that allows me to download the RPM

.... I am new to this list (got referred here from the fedora list, COLD ....) and have a few questions. I poked around CentOS.org & couldn't figure these out, so here goes: 1. What is the correspondence, if any, betwixt RHEL, err, I mean LNAELV version #'s and CentOS version #'s ? 2. Does CentOS plan to branch permanently away from LNAELV distribution, or periodically

.... I just installed CentOS 4.4 yesterday P.M., on my 2.4 GHz P4 box, Foxconn i865 mbd, 2 GB DDR400 RAM (4 X 512 MB), 1 X 20 GB HDD (hda), 1 X 160 GB HDD (hdb), 1 X LG GSA H22N DVD reader/burner (hdc), 1 X 400 GB HDD (hdd), Coolmax CP500-T PSU. I wiped SuSE 9.2 off of the 20 GB drive & installed CentOS. The other 2 drives were already ext3 FS & will be mounted as /home & /work

Does anyone here use a multi-button (as in more than 2) mouse with Linux? How well supported are they? I've had to get one recently for work. I was diagnosed with CTS and I now wear braces and use a wireless Intellimouse. Works great at work with Windows, but I'm unsure how much, if any support there is for Linux. Anyone have experience with this? Preston

Hi All, Please for some advice. I have Linux router that do traffic control with HTB , routing and traffic counting. currently machine is with P4 2.2GHZ 1GB RAM. I plan to migrate to dual core CPU. I know well P4 dual core but is it anybody has experience with AMD64 dual core / or single core / for traffic control . I use Deban Linux for my router. Can I expect problems with HTB and iproute 2

Hello Does anyone know of any possible concerns in moving a "production" CentOS 4 install from one machine to another where the "only" difference is that the processor changes from a 1.8 Intel P4 "without" Hyper-Threading to a 3.0 Intel P4 "with" Hyper-Threading ? I am guessing not, yet I "have to" ask. Regards, - rh

No, just no. You do not use goto to skip a code block. You do not return an obvious variable from a singly-inlined function and give the function a return value. You don't put unexplained comments about kmalloc in code which doesn't do dynamic allocation. And you don't leave stray warnings around for no good reason. Also, when possible, it is better to use block scoped variables

No, just no. You do not use goto to skip a code block. You do not return an obvious variable from a singly-inlined function and give the function a return value. You don't put unexplained comments about kmalloc in code which doesn't do dynamic allocation. And you don't leave stray warnings around for no good reason. Also, when possible, it is better to use block scoped variables

Did you restart the crontab service after the change ? If not, crontab wont be aware of the changes. Nassri > rado wrote: > > for some reason, crontab is not picking up a job here > listed. I, for > > one see nothing wrong w/it as I have been running approx the same > > basic crontab for well over a year now. I have just put this box on > > line about a week