similar to: two-stage dialing

Dear All, We sometimes have to replicate large "live" filesystems with many ( sometimes millions, up to few hundred millions ) files on them. ( Copying actively used files is of course a bad idea, but it really helps to keep the delta small, so one final transfer can later save the day. ) The problem, as one may guess, is that some files may disappear during the process, so rsync

Has anybody out there tried to use two different iconnecthere accounts with Asterisk? What I want to do is use a second account if the first is busy. I have tried the following: exten=>_91NXXNXXXXXX,1,StripMSD,1 exten=>_1NXXNXXXXXX,2,Dial,SIP/BYEXTENSION@iconnect ;iconnect is the first account exten=>_1NXXNXXXXXX,3,Dial,SIP/BYEXTENSION@iconnect2 ;iconnect2 is the second account But that

Hey I need another pair of eyes on this! I would like to add phones numbers to the blacklist from any handset so I did this: exten => _*66XXXXXXXXXX,1,StripMSD,3 exten => _XXXXXXXXXX,2,DBPut,blacklist/BYEXTENSION/1 exten => _XXXXXXXXXX,3,Hangup However what I get in the database is: /blacklist/BYEXTENSION : 1 And BYEXTENSION is not replaced with the actual number

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

Hello-- I'd like to do a little processing on external phone numbers from within the asterisk pbx. Fairly simple stuff, but... devilishly hard to make it work so far! 1. I'd like to dial 9 to get an outside line. 2. If the number dialed after the 9 is 754XXXX, I'd like it to go thru unmodified. It's the only local number available here. 3. I'd like all 1 XXX XXX XXXX numbers

Hello, I have som problems with my BRI/capi setup. I manage to call in to the system (some rows below). ---------------- -- Executing Dial("CAPI[contr1/16453]", "SIP/BYEXTENSION@janm|10") in new stack -- Called s@janm -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing -- SIP/janm-63f5 is ringing ---------------- But I can't make outgoing calls from

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec

I have a Pitney Bowes (USPS Postage) machine that connects via a USB modem to fill it. It connects but soon disconnects. It works fine through a standard analog phone line not connected to asterisk. I also have the 'd' option on the Dial command. exten => _1NXXNXXXXXX,1,Dial,Zap/47/BYEXTENSION||d Any ideas? John

I currently have two fax machines on my system. Both of them seem to send and receive very slowly. My end users are complaining; saying it was faster before we moved to * (Straight Analog Lines) Any help would be great. PS: I already have the d option on the Dial line. Both fax machines are in their own context: [faxes] exten => _9NXXXXXX,1,StripMSD,1 exten =>

hi, i installed asterisk and works very well, the only problem is that when i try to call a direct number of a company that has a normal PBX i got this error: to 10.8.210.153:5060 == Accepting call on 'SIP/a.sampietro-f7be' (a.sampietro) -- Executing Goto("SIP/a.sampietro-f7be", "doisdn|BYEXTENSION|1") in new stack -- Goto (doisdn,00115601992,1) --

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

Hi, I am lost trying to figure out how to enable overlap dialing for calls coming in and coing out on a pri span. DISA looked promising at first, but does not seem to support overlap dialing. Just picking up a call by and trying to dial out does not seem the way to do it either. I tried: [dialincontext] exten => 12341234,1,Goto(dialoutcontext,s,1) [dialoutcontext] exten => s,1,Wait,1

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

Hello, we have a PRI (E1) to a carrier and a second one to a legacy PBX: DTAG ---pri---- * ------ Hicmo (PSTN) | | Sip and more Many normal inbound calls are direcly routed to the hicom. Outbound calls from the Hicom go through LCR and then to PSTN. Inbound faxes are working, but outbound faxes from hicom to pstn are

Hi folks, The obligatory newbie disclaimer: "Hi, I'm new to Asterisk and I have a couple questions..." OK, now that that's over with: I've just started working for a small CLEC, and I'm trying to sell * to my boss as a replacement for some expensive/inflexible/closed-source software he's been using to provide residential dialtone with for a couple years now.

I am having a really hard time getting gnophone working with asterisk. Gnophone tries to register with my server but there is no response. I can direct incoming calls to gnophone but if gnophone answers them, asterisk does not recognize it. Here is my configuration: iax.conf [jambo] type=user host=dynamic defaultip=136.159.99.100 permit=136.159.99.100 username=jambo secret=fubar

For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of

I need to be able to dial a long distance provider that uses an access number and an auth code. I would like to be able to program this so that the user can dial 8 and then the long distance number, asterisk will hopefully do everything in the middle. The sequence to accessing the provider is on my traditional phone speed dial as: * Dial local access number * Wait 5 seconds * Dial the auth

Hi all, I am having a problem with ChanIsAvail. It always returns the same result, regardless of whether an extension is available or not. It always returns 0 Unknown Status. This is my dialplan. exten => _2XX,1,ChanIsAvail(SIP/winsor_${EXTEN}|s) exten => _2XX,2,Verbose(0, ${AVAILSTATUS}) exten => _2XX,3,GoToIf($[${AVAILSTATUS} = "1"]?4:5) exten =>

Hello: I am testing Asterisk with oh323. My question is: can Asterisk route some calls thru a second h323 gateway (a h323 <-> PSTN gw)? - Asterisk ip: 192.168.1.10 - h323<->PSTN gw: 192.168.1.20 I've tried: exten => _9XXXXXXXX,1,Dial(OH323/192.1.1.20) or exten => _9XXXXXXXX,1,Dial(OH323/BYEXTENSION@192.1.1.20) but it does not work at all. If my h323 client