similar to: scsi tape drive problems

I have an external HP SureStore DLT VS80 with a SCSI LVD 68 pin interface and an external HP SureStore DAT24 with a SCSI Centronics 50 pin Narrow SE interface. The cable for the DAT has a Centronics connector at one end and a 68 Pin Wide to Narrow terminated connector at the other. The cable for the DLT has a LVD/SE 68 pin connector at both ends. I have terminator blocks for both devices.

I have a function: myplot <- function (X) { d <- plotCounts(dds2, gene=X, intgroup="condition", returnData=TRUE) png(paste("img/", X, ".png", sep="")) ggplot(d, aes(x=condition, y=count, color=condition)) + geom_point(position=position_jitter(w=0.1,h=0)) + scale_y_log10(breaks=c(25,100,400)) + ggtitle(X) +

> On Nov 2, 2017, at 9:27 AM, Ed Siefker <ebs15242 at gmail.com> wrote: > > I have a function: > > myplot <- function (X) { > d <- plotCounts(dds2, gene=X, intgroup="condition", returnData=TRUE) > png(paste("img/", X, ".png", sep="")) > ggplot(d, aes(x=condition, y=count, color=condition)) + >

I don't really understand. I mean, I understand the solution is print(ggplot(...)). But why is that required in a function and not at the console? Shouldn't I be able to rely on what I do at the console working in a script? Is this inconsistent behavior by design? On Thu, Nov 2, 2017 at 11:54 AM, David Winsemius <dwinsemius at comcast.net> wrote: > >> On Nov 2, 2017,

I need to install an HP Surestore dlt on a Centos 4 machine and I am at a loss as to how to proceed. Can someone either provide or point me to an online reference on how to proceed to add and configure a SCSI adapter and tape drive. I have read, but not really understood, the man page entry for st. Does kudzu handle this? Regards, Jim I am a digest subscriber so the favour of an

I'm looking for a well-supported ExpressCard or PCMCIA/CardBus SCSI card that can do at least FastSCSI (Narrow, Wide not necessary) that is supported by CentOS 7. I have an Adaptec SlimSCSI 1460D, but it doesn't seem to be supported (it's previously supported by the aha152x driver). Any ideas are welcomed, other than 'just use a desktop.' I am not sure a USB or Firewire

I have an IDE based PC running Linux/CentOS4 to which I wish to attach a scsi dlt. The host controller is an Adaptec AHA3940 something that lspci reports as: SCSI storage controller: Initio Corporation 360P (rev 02). I would like to have the system load the driver for this adapter at boot but I have two problems: 1. I am not sure which driver to use; and 2. I do not know how to force

I have an Adaptec 392320 Ultra320 SCSI adapter. I am running x86_64 SLES9 SP3. When I build x86_64 Xen with just the 2.6-xen kernel + initrd, I am getting the following error on the module load. But if I go back to building separate xenU and xen0 kernels without initrd the device works without any issues. Any idea what is going wrong here? Am I leaving something out of my initrd? Here is the

I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie

I have a question regarding the building of the unified xen kernel (linux-2.6-xen) and the use of initrd. In the past I built both xen0 and xenU kernels; the xen0 default configurations had SCSI and Fusion MPT support compiled into the kernel. Now, they are built as modules. The problem is that I am unable to boot the xen kernel built that way, even though I am building an initrd. I have

Hi all, after an uprade to new kernel 2.4.21-15.0.4.EL on my server appears a lot of these messages: EXT3-fs error (device sd(8,17)): ext3_free_blocks: bit already cleared for block 19268224 EXT3-fs error (device sd(8,17)): ext3_free_blocks: bit already cleared for block 19268225 EXT3-fs error (device sd(8,17)): ext3_free_blocks: bit already cleared for block 19268226 I try to rebuild array but

Thanks Don MacQueen for this reply to my initial query - please SEE MY REPLIES TO THESE IDEAS AND FURTHER INFORMATION BELOW >From: Don MacQueen [macq at llnl.gov] >Sent: 23 February 2010 21:25 >To: Jonathan Williams; r-help at r-project.org > >Subject: Re: [R] Problem with strptime generating missing values where none appear to exist > >What happens if you do all that NA

hi all We have a rh linux server connected to two HP SAN controllers, one an HSV200 (on the way out), the other an HSV400 (on the way in). (Via a Qlogic HBA). /etc/multipath.conf contains this : device { vendor "(COMPAQ|HP)" product "HSV1[01]1|HSV2[01]0|HSV300|HSV4[05]0" getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

I've got an i386 server running centos 4.2 with 3 3ware controllers in it -- an 8006-2 for the system disks and 2 7500-8s. On the 7500s, I'm running an all software RAID50. This morning I came in to find the system hung. Turns out a disk went overnight on one of the 7500s, and rather than a graceful failover I got this: Jan 6 01:03:58 $SERVER kernel: 3w-xxxx: scsi2: Command

I have backup problem of redhat 7.2 with ext3 file system. I'm using dump for backup. The problem is one of the filesystem (/proj) Incremantal backup is not happening. The command used is dump -u1a -f /dev/st0 /dev/md0 Daily its taking the entire file system backup eventhough i tried incremental. This is happening only for /proj and proj1 is working fine. Filesystem Size

Hello, I've been using ext3 on some of my production servers, I am now having some serious issues. I'm not sure where to pin point this to. 1. I have success using this with a Mylex Raid controller and have no problem. setup as RAID 1. 2. I have success using this with a standalone at all levels single ended SCSI, IDE Drives. 3. "" This is where my problem starts

Hi All, Two and three-node clusters with SC3.2 and S10u3 (120011-14). If a node is rebooted when using SCSI3-PGR the node is not able to take the zpool by HAStoragePlus due to reservation conflict. SCSI2-PGRE is okay. Using the same SAN-LUN:s in a metaset (SVM) and HAStoragePlus works okay with PGR and PGRE. (both SMI and EFI-labled disks) If using scshutdown and restart all nodes then it will

Hi *, I try to install Xen 3.0.0 on a IBM x342 with a ServeRAID 4Lx controller. The box boots with "plain" 2.6.12.6 (aic7xx- and serveraid-support included). It does not with a similar configuration of 2.6.12.6-xen0. Any hints, boot options? by Töns -- There is no safe distance. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

(lspci-output added at the end of this mail!) Hi specialists, I''m trying to pass an HP Surestore USB-drive to a domU. I''m hiding the pci-device in the dom0, and capturing it in the domU. Although this works fine I receive the following lines in /var/log/syslog of the dom0 after a reboot ======================================================================= Aug 8

I'm having trouble getting my iPod working under Centos 4. I was hoping someone else using their iPod with Centos 4 could shed some light on this. When I attach my iPod via USB, I get these messages: 19:36:44 brahma kernel: usb 1-8: new high speed USB device using address 2 19:36:45 brahma kernel: Initializing USB Mass Storage driver... 19:36:45 brahma kernel: scsi2 : SCSI emulation for USB