similar to: CPU load

Hi! Probably another newbie question. Is it possible to run * on one processor and MySql on the other in a double cpu server? Anders -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050923/6e3590b5/attachment.htm

I have a problem. Incoming calls work without problem but I cant call out. Using AAH.Gets a busy tone Anyone who can see a mistake in Outgoing settings context=from-pstn host=ipkund1.rixtelecom.se insecure=very nat=yes secret=xxxxxxxxxxx type=peer username=0406082250 Regards Anders Svensson -------------- next part -------------- An HTML attachment was scrubbed... URL:

I know this issue has been covered with at least 2 different patches, and probably a dozen different discussions, however I'm a bit unclear as to what my options are. I have a DSL line coming in with 8 IP addresses going to an OpenBSD firewall doing 1:1 NAT for machines behind the firewall. My asterisk box is one of these machines, and I'd like to allow foreign SIP clients

Hi! Is there a simple way for an * newbie to force * to use different sip-trunks for different calls. I have 2 siptrunks, one for inland calls and one for international calls. All in country numbers starts with 0 and all international starts with 00. This I have configured in the outbound routing. But * always use the incountry trunk because the 0. dialpattern is also true for international

Hi I tried to install the * in my Radhat 7.3 machine. The "gmake" and "gmake install" went fine, but "gmake sample" gave me errors of "configs/*.adsi", "sounds/demo-*" and "sounds/*.mp3" errors. I created a dummy.adsi in the configs folder and commented out the "sounds/demo-*" and "sounds/*.mp3" in the Makefile to

Hello, Does asterisk do transcoding when the call goes through the system, codecs are the same but signaling protocol is changed. example: SIP with GSM ---> IAX with GSM What quality destruction happen when I use transcoding? I know this is not a concrete/precise question, but I would like to know how is it in general. What CPU performance is needed for transcoding 30 channels e.g. from

It does not look like Nufone is still in business, judging from the content on their site, which is very little. There is not even a configuration document to download, to connect to their network. The rates file is only for US/Canada calling. No international rates on this rates.csv file. I have signed up with a $5.00 account with them way back in November 2004. After signup, I havent received

On 09/04/2017 10:00 AM, Ingard Mev?g wrote: > Hi > > I'm seeing quite high cpu sys utilisation and an increased system load > the past few days on my servers. It appears it doesn't start at exactly > the same time for the different servers, but I've not (yet) been able to > pin the cpu usage to a specific task or entries in the logs. > > The cluster is

We are currently running CentOS 5 update 4 on a Dell R910 server 16 cores/32 hyperthreaded with 64GB of memory. It is our main Oracle 11g DB server for one of our customers and is attached to an MD 3000 storage array. We are having a load averaging around 5 but see no swap in use, CPUs are pretty much idle and no I/O wait. We have Oracle dataguard turned on in transactional mode. I've checked

All the calls are using ulaw. The files that I am playing are gsm. I suppose doing a file convert with sox to .ulaw may help but it should be able to do 500 calls without an issue. Can it possibly be a bug? if not how do I profile which call(s) can be causing the spike? On Wed, Apr 22, 2020 at 2:21 PM Telium Technical Support <support at telium.io> wrote: > Could some calls be arriving

Hi, I've been getting regular CPU usage spikes(50%-80%), due to asterisk (according to top). I never noticed this on 1.4, and I have top running in the background pretty much all the time. In between those spikes Asterisk stays under 10% CPU usage (I have a transcoder card, which helps). It's very regular, never any missed spike, or any spike in between the regular spikes. I

I've made some modifications to zttest in order to use it as a frame clock accuracy tester / slip detector. I'm not certain if that was it's original purpose, but it seems that a lot of folks try to use it that way. The result is something that I'm calling ztclock for now to help avoid confusion. I'm including the source at the end of this post. You can compile it by placing

Hi, Since I upgraded from Asterisk 1.2.18 to 1.4.17 I've been experiencing high CPU utilization from the chan_sip module. I've notice the more sip peers I have loaded, the higher the CPU load goes when there are no active calls. I am currently using a Pentium 4 3.0Ghz with CentOS 4 Kernel 2.6.9-42.0.2.EL. I currently have 1558 sip peers loaded in Asterisk and the current CPU load is

Hi.. I am setting up a new server (2GHz CPU, Ubuntu 8.10) and am using dovecot for an IMAP server. I have installed dovecot 1.1.4 and Squirrelmail 1.4.15. sudo dovecot -n shows this: # 1.1.4: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_process_per_connection: no

Hi All, I have a problem (at least I think it's a problem) where the wcfxs module causes constant CPU usage spikes. The card being used is a Digium Wildcard TDM400P with 3 FXO modules and 1 FXS (TDM31B). Monitoring my otherwise idle asterisk box (with top) I see once every 3-5 seconds hi (hardware interrupt) spike to 30%-40% and then drop back to 0 again. This is the case wtih both asterisk

I need to reopen this discussion because it's impossible to run spandsp (and VoIP) under these circumstances. With zaptel unloaded, I see the following "vmstat 1" output: no swapping, an occasional disk output, +/- 1003 interrupts/sec., less than 10 context switches/sec., CPU idle 100%. A very quiet system. I load modules zaptel and wcfxo, and the system utilization stays the

Hi, I have an Asterisk box which has an IVR that plays random gsm files. The box has SSD's and two CPU E5-2695 v2 cpus with 64GB ram. The Asterisk CPU usage along with the load seems to jump around. With about 500 callers it hovers between 250-400% CPU (so 2.5 to 4 cores) which seems reasonable. Every so often the load average spikes. The idle never drops below 85%. When the load average

Hello all, I hope someone can help me, I have been testing out Dovecot to switch from popa3d which I use at the moment. When I get several users connecting and disconnection multiple times, the Dovecot process with command Auth uses 50-90% of the CPU for the period which they are connecting. I am wondering if there is something that I may have misconfigured, or if there is something that I can

I am trying to figure out why winbind is using 100% CPU on my file server. I am using Samba version 4.0.4. Everything is fine for a few minutes when I start winbind, however after a while it begins using 100% CPU. I haven't been able to narrow down what triggers this CPU usage spike, but I did attach the GNU debugger to find out what's going on in the process. The backtrace revealed this

Hello, I have a 3 server asterisk configuration where one asterisk (say A) (v 1.4.25) has a digiuim card connected to E1 from which calls are routed to another asterisk server (B) (1.6.0.9) over IAX trunk from which calls get routed to third server (C) (1.6.0.9) again via IAX trunk. SIP clients are connected to third server. A is the PSTN termination server, B runs the menu and AGI and C is