similar to: Large scale e.g. university

Hi everyone, We have been working with Asterisk for a while now and would really like to expand its capabilities by fully integrating it with our Definity g3si and are wondering about other peoples experiences with similar setups. Thus far we have only been able to achieve a partial 1 way integration, but ultimately would love to route inbound voip calls to the asterisk out of the lucent.

Calling all Definity admins, Got a few questions about Definity -> Asterisk interoperability. 1) What are the options for integration? Can I hand off extensions from the Definity and vice versa? 2) Anybody have any working configs they would like to post? I've found and read the legacy integration on the wiki about the two systems. I've also googled and found a few threads that were

Does Asterisk work with Lucent or any other PBX phone systems????

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

AS a proof of concept experiment, I want to try and integrate Asterisk with my Lucent Definity G3 switch. I don?t have an available T1 port on the G3 but I can round up 4 analog ports off the G3. What I thought I could do is create a ?Hunt group? on the G3. Let?s say I configure 5610 ? 5613 as a hunt group. I know I would need a 4 port FXO card to install in the Asterisk server. Two configuration

Hi guys, I'm interconnecting an Asterisk box with a Lucent Definity PBX by means of FXO/FXS ports on a TDM2400 card. Everything works well, except for one little thing. Every now and then somebody (from an Asterisk extension) will call another extension on the Lucent Definity PBX and they hit their voicemail. They caller leaves their message (or not) and hangup, BUT the Lucent sometimes

Hi Everyone, So I have been further exploring the integration of our asterisk server and our lucent definity g3si system. I took the suggestion of setting up an isdn-pri line added the two way tie trunk and the signalling group, but can't seem to get the PRI signalling working on the asterisk correctly. I've set pri type to network on the lucent, and pri_cpe in zapata on the asterisk, but

I don't know if there is some fault in compiling or a bug of the new R-1.7.0 version: cl.pam.2 <- pam(as.dist(1-cor(mel.data)),2) plot(cl.pam.2) perform a right partitioning and silhouette plot on the old R-1.6.2 instead "Error in clusplot.default(x$diss,...... ; x is not numeric" is the output on the new R-1.7.0. Same platform: RH8.0 i686. Some suggestions? A.S.

Does anyone know how to monitor * to see if they are receiving timing slips on a span connected to a T100P card? I am seeing b-channel restarts quite often and also getting "No D-channels available" warnings from time to time. Yesterday I had all the b-channels crash during a MeetMe Conference. Not good! This PRI is connected to an Avaya Definity PBX that is onsite and located in the

I've read the wiki and other resources on how to connect Vonage / Voicepulse and all these other services to Asterisk... We are attempting a connection to a Lucent iMerge. Lucent has told us that it won't work - but we feel confident that it will. Has anyone worked with the Lucent iMerge - or would be willing to help lend a hand? It is capable of H323 / MGCP. Even if I could make the

Hi, I just got a T1 interface for a AT&T (became Lucent) System75 (uses same cards as Definity). I would take a crack at making a cable but can't determine the pinout for a cable and it is not apparent from the board. Asking you guys makes sense as one of you may have one of these systems. The cable has a amphenol male D50 connector on one end and probably a rj45 on the other. I also

Anyone know how to get app_queue to send logs to MySQL or any other sql server. I found info for cdr's and even configs but nothing on queue_log. If sql is not supported in the current app_queue I will be willing to pay someone to add it. John Bittner Simlab.net

Is anybody else out there using VoicePulse Connect and having problems this morning? I just noticed that they have absolutely no contact information in their website.. just want to make sure I didn't break something in my asterisk configs. -fedl

Anyone know how to disable DNS in asterisk so PJSIP still works when the internet goes down. I tried a few things but nothing is working. I even installed BIND on the asterisk box ...that didn't even work. Once I pull the plug on the internet, I cant dial anything. John Bittner CTO [xaccellogoemail] 380 US Highway 46, Suite 500 Totowa, NJ 07512 Phone: 201.806.2602 x2405 Fax:

Hello all, i am new to shorewall and i already have a question ;) i am running a mailserver in my dmz (or actually this will be when = evertything will be working fine with shorewall) with public ip = addresses.. i have a subnet of 8 ip addresses (255.255.255.248 mask) and = i was planning of the classic 3 nic (eth0-2) setup... the dmz should = work with proxy-arping...=20 now my quesion is

Checking the earlier mails, it stated that the phones were $75 (100) & $85 (102) ref :- http://lists.digium.com/pipermail/asterisk-users/2003-June/013483.html Well, I just called Ovislink/dgtimes and was quoted $90 & $100 and the person said there was no price change. Anyone on this list actually bought them at the $75 & $85 rate ??? Regards...Martin -- Too much is just enough.

I have a couple of live T1s sitting around and they are not ISDN(like most of the people that are using Asterisk seem to be using), they are regular old 24 channel, robbed-bit, E&M wink start, D4AMI T1 circuits. Can I get these T1s to work with a T100P Digium card and asterisk? Searching through the lists and the documentation I haven't seen any examples of how to configure this kind

This is a minor release of Shorewall which rolls up a number of bug fixes. New features include: 1. A NEWNOTSYN option has been added to shorewall.conf. This option determines whether Shorewall accepts TCP packets which are not part of an established connection and that are not ''SYN'' packets (SYN flag on and ACK flag off). 2. The need for the

First of all - Many, many thanks to Mark for his troubleshooting and fix of bug 1320 (FXO_KS signalled Zap Channels on Adtran 750 Channel Bank Stuck in Rsrvd State). I have heard complaints that once every couple weeks, when a user picks up their analog phone (t1 span off of a TE410P into an Adtran 750 with 6 FXS cards), they don't get dialtone, but instead, hear another conversation.

Guys, I have a customer that heavily uses modems, the problem they don't work reliably with some of the carriers I have used like Level3. This is somewhat expected due to the limits in VoIP so I need a better solution. If I set up an asterisk system on customer premise with an FXS card in it and have calls sent to another asterisk box with a PRI can I get this to be more reliable and better