similar to: SIP gateway question

Product Review Mediatrix 1204 4-Port SIP FXO Gateway Firmware: v2.4.10.69 - US Version US Retail: ~$750, Street Price: ~$450. The Mediatrix 1204 SIP FXO gateway is equipped with four RJ11 pstn jacks and one RJ45 Ethernet jack on its rear panel. It terminates the four pstn lines in either Loop Start or Ground Start mode, handles incoming CallerID, and generates either Dial Tone (back towards the

pstn -> sip gw -> * -> C7960 When I dial into * via the pstn, I hear the ivr menu just fine (good quality). I press 3000 (valid extn), and I begin to hear ringing however the ring back is very very choppy. I answer the C7960, and speech is clear in both directions. Place the C7960 extn on hold, and the MOH is very choppy. Checking 'sip show channels' indicates both the sip gw

Hello guys, I need your help related to a mediatrix 1204 configuration. I read some of the messages that you posted in the asterisk users mailing list about the mediatrix 1204 and decided to contact you. I know that the community is not related to Mediatrix devices, but so far I have not found any other group that has work as much as you with them. I bought the mediatrix in Mexico and my provider

I'm having a brain fart.... What's the proper syntax for dialing out via a sip g/w (Mediatrix)? Been trying stuff similar to: exten => _6X.,1,Dial(SIP/3091@205.22.93.1/${EXTEN-1}) where 3091 is alias for the port on the Mediatrix. Sniffer indicates * did even try the IP. Rich

Anyone had any good/bad/otherwise experience with the Mediatrix 1204 Sip FXO 4-port gateway? The archives tend to suggest the box is not very straight forward, and possibly lacks some basic pstn interaction features. Thinking about trying one in place of a pair of x100p's (functioning fine now). CallerId, etc, supported on this gateway? Rich

I have 4 sparc based sun boxes I am about to pay money so I can get rid of them. They are running older versions of Solaris. You should be able to load Solaris 10 and play around with * on them. Time to clean the office: 3 Ultra 5 1 Sparcstation 5 I also have a box full of Sun keyboards and mice. Contact me offline if you want them. I've had many good years of development on them and it

Sure would like to hear experiences using various FXO to VoIP gateways with *. It seems that any thread that has anything to do with problematic FXO interfaces goes on forever with speculation about everything under the sun. Unless there is someone out there with the engineering experience to build a better one it is a waste of time, let Digium deal with it. If the TDM400P can ever be made 99.99%

Possible Mediatrix 1204 fxo sip gateway workaround Need some feedback from experienced * users relative to this workaround please please please. Problem: The mediatrix 4-port fxo gateway does not provide any mechanism for * to select which "port" an outbound pstn call will use. (See lots of previous posts over the past four days for more detail if needed.) Our reseller has been

Many thanks for that info! > Peter > > One thing to consider if you only have 3 PSTN lines is the Sipura > SPA-3000 (you would need 3 of them, one for each line) > > We have 2 PSTN lines at our scout campsite, and they work very well, as > well as providing a simple power outage solution. > > They retail about ?80 + the VAT > > I can supply more information

I've been looking around for a small external sip fxo gateway, sending emails to possible vendors, etc, and can not seem to come up with anything that fits. Suggestions anyone? (No channel bank & T1 card suggestions, please. I've also just completed an eval of the Mediatrix 1204 which does not support the requirements.) The market between two fxo pstn lines (pair of x100p's) and

Hello! We are located in the UK, and we are planning to replace our old pbx with an asterisk based pbx. For outgoing calls our present pbx is connected to three PSTN lines which all have the same number. Internally, the pbx caters for quite a few extensions, and each extension can make outbound phone calls. Only very rarely does our call volume exceed three simultaneous connections (inside to

Hi List, Here is the config ext 2601 is a GS BT-101 phone ext 2062 is a SNOM 200 latest public firmware on both asterisk is Asterisk CVS-11/14/03-22:55:45 Make a call from 2601 -> 2602 life good, call works have 2602 place call on hold. The music on 2601 IS NOT my music on hold. It seems its a MOH server SNOM has. take call off of hold on 2602 and 2601 still trys to play parts

I have one system that went totally crazy on me. It went into an infinite loop rotating * message and log files. From the asterisk console I kept seeing the message about re-loading logger.conf over and over and it just kept creating more and more files. I baby set many different * boxes all running the same script without this problem. Here is my cron script: /var/log/asterisk/cdr-csv/*csv {

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0

Hi there, I was wondering if anyone has successfully used Asterisk as a dedicated Analog PSTN gateway to take the place of, for example, a Mediatrix 1204 or an 8 port model? Basically, I am thinking of using a Linksys SPA9000 as the PBX and just need an Analog PSTN gateway for 4 to 8 FXO lines. It does not sound like the Mediatrix 1204 does a very good job and I figure I can build a much more

I have multiple locations running * where all the phone are on their own lan and all the data is on a separate lan. The problem is they are sharing the same dsl connection. The locations are IAX2 trunked together, but it only takes one data down/up load to just kill the voice. What I am looking for is a small switch with QoS that I can stick in ahead of the dsl modem. Plug in one connection from

I'm having a problem getting outbound trunking to work using asterisk and an external SIP FXO. 7 digit dialing produces the following output: -- Executing Dial("SIP/mitel-fe17", "SIP/5925660@mediatrix-1204") in new stack -- Called 5925660@mediatrix-1204 -- SIP/mediatrix-1204-645e answered SIP/mitel-fe17 -- Attempting native bridge of SIP/mitel-fe17 and

Gonzalo, I have an APA III-4FXO and I tried using your configurations, I received the message below: -- Executing Dial("SIP/2010-edfc", "SIP/2217008@Mediatrix") in new stack Sep 6 16:54:51 WARNING[1192491824]: chan_sip.c:590 __sip_xmit: sip_xmit of 0x814bf0c (len 774) to 192.168.199.5 returned -1: Operation not permitted -- Called 2217008@Mediatrix Sep 6 16:54:54

I added those lines to my configuration, and i just see with ethereal that my client dial and the 1204 led turn on and they started to interchange packets, im newbie with asterisk i have been trying another sip server with mediatrix that work so well, but i dont know how to set it up? could u send me all the configuration i need step by step? ----- Original Message ----- From: "Wojciech

I have an * setup with sip phones and sip fxo gateway. When a sip phone places a sip/fxo call on hold, MOH is very choppy. It looks like RTP has a real problem with timing if it is not receiving RTP packets. If the outside call that is placed on hold is not generating any audio, the sip/fxo gateway does not send * RTP packets. Is this valid? Is this a problem with the sip/fxo gateway or a problem