similar to: R2 or E&M for E1 CAS pbx to pbx link

Hi folks, where can I find the R2 beta code for Asterisk? Best, PauloHM -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030806/9c7a0660/attachment.htm

Hi, I try to find some information about CAS E1 signalling and how it's handled by Asterisk. My customer wants to connect to a BT ITS Netrix by CAS E1 E&M. The system is intended to take the channels and mix them (meetme / confbridge) and send the audio back mixed to each. The layout: BT ITS Netrix: CAS E1 E&M <-> MUX - WAN - MUX <-> Digium TE220, Asterisk I've

Hello All I need to use Asterisk with an E1 sangoma card with CAS R2 signalling for Vietnam what is difference between libr2 of CVS and libmfc2 of soft-switch.org ? how to compile chan_unicall.c on asterisk. asterisk update CVS-head- May 27 2005. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I'm trying to make my asterisk box to act as a telco, in order to reproduce a US environment in europe. Our telco provider is giving us those settings: ESF B8ZF Inbound = E&M Immediate Outbound sig =Wink Start Yield to Glare = Yes Those trunks are using CAS for signaling. I have tried many configs/combinations in zaptel.conf and zapata-channels.conf In zaptel.conf, when having

Ok, I'm about to take the plunge, and am trying to decide between Channelized T1 E&M and PRI. I'm getting an "Integrated T1" which will have data and voice capability, all plugged directly into my digium single T1 card. In either case the data piece looks pretty straighforward, just setup the channel properly, hand it off to the linux hdlc layer, and route away.... the

I need to create a couple of tie lines between a legacy system and an Asterisk system. I was told that the tie lines are E4 Superframe E&M. I have done E&M wink but have no idea about E4 Superframe E&M and Google is not helping me here. Does anyone know about this type of signaling and if Asterisk can handle it? Thanks, Steve

I am an Asterisk newby, and I cannot seem to get Caller ID information from our T1 line. When calls appear at the phones, they say the call came from "asterisk" and unknown number. I know how Caller ID information is passed on an analog phone line (between the rings) but with a T1 line, I don't know technically how it is done. I don't see the caller's number in the

Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. "cas

Hi, I'm testing an E1 with E&M signaling. Some of the problems I'm running into are the following: 1) if I try to configure any channel above channel 15, I start getting a "multiframe alignment error" on my telco test equipment. So I have my zaptel file only configured for 15 channels, like this span=1,1,0,cas,hdb3 e&m=1-15 2) When the test equipment tries to send me

hello, I have been searching the mailing list for info on R2 signalling support in * The best I came up with was a post by Steve as far back as 18 Jul 2003. This post indicates that some work was being done on it. Has anyone got any info if the current cvs does have support for R2 on E100P as yet? Thank you. Anthony

We have an old Telrad 128KSU PBX to which I am trying to connect asterisk in the following manner: Current Setup: Telco-> T1->PBX Desired Setup: Telco-> T1-> Asterisk-> T1-> PBX. I am first trying to setup the Asterisk -> T1->PBX part without disturbing existing setup so I can get asterisk to forward calls to PBX and once that is done, I would try to move the telco

hi! What's the libr2 status for Asterisk ? I've got R2 E1 delivered to my * box. I have TE410P digium quad card with newest CVS. How much % is completed with libr2 ? what's completed ? & What's missing ? Thanks, bit123.

The last thing that I read about it was: Steve Underwood [steveu@coppice.org] wrote on Sep 3: >> Is E&M designed to work with the E1 driver code? I think probably not. I >> had to fix some things to get proper access to the CAS signaling bits >> when I implemented MFC/R2... So, apparently he implemented it. I was trying to contact Steve, but he isn't answering me. Does

I want to replace a custom PBX, that is infront on a IVR system based on OLD NMS AG-E1 Card. The Cards is configurated with CAS Digitalmode, someone can give me some info about Digim Cards CAS configuration i need a conversion Table? I wanto to don't touch configuration on winbox, i want only replace HWPBX box with asterisk. Diagram Telco E1 ===>Proprietary PBX========(CAS)===>IVR

I just came across libr2 anyone using it in its current state. Specifically someone from India or around India using it. Also does it work with the digium e1 cards or only the Dialogic cards. http://digium-cvs.netmonks.ca/viewcvs.cgi/libr2/ -- regards Vikram (http://www.vicramresearch.com)

I'm trying to implement E&M type V over a T1 and have not had much luck. Type V sends 1's when on-hook and 0's when off-hook (for a little background) which is the reverse of type II, which is what the e&m keyword in zaptel.conf gives. The closest I have gotten is to set the channels to cas or user in zaptel.conf (cas = 42-71:1111) which will send all 1's on-hook, but I

According to CarrierAccess, the Adit 600 uses CAS for voice signalling. What is this? This should not be a problem for Asterisk? Does the Asterisk server need to reencode CAS into aLaw when going to Euro ISDN? BR Daniel Nystr?m

Hi CAS is a centralized authentication service, and the cas_auth filter can be installed to automatically make your web application authenticate against a CAS server. The SVN path to the plugin is http://svn.ki.se/rails/plugins/cas_auth and a homepage with some information can be found at http://opensource.ki.se/casauth.html For use, just install the plugin in your application and set

Hi, Could some one explain what are the 4 bits we should define after cas setup (zapata.com) ("CAS Signalling requires idle definition in the form ':xxxx' "? Thanks in advance, Daniel