similar to: G.729 Licenses from Digium

I've just setup a new asterisk server, and I need to have G.729 working on this system. The problem is I don't have any IDE drives (and therefore no /dev/hda etc), but only /dev/sda.   Is there really *no* way to license G.729 on a SCSI-only system? IMHO it's really stupid to replace an entire server because of a licensing issue. There *must* be a solution.   Anyone, please? Or at

Asterisk G.729 -------------- Digium is pleased to announce that we now have the G.729 Codec available. This industry standard allows you to stuff more calls in a limited bandwidth to utilize IP voice in more cost effective ways. A typical call consumes 64Kbps of voice bandwidth. G.729 reduces the call to 8Kbps (of course normal IP overhead adds to this number). Many people are using Asterisk

Hello, I'm trying to find out if Asterisk will support plain G729 or G729b. I've read all over that it supports G729, but I can't seem to find any explicit remarks regarding the specific versions of the codec Asterisk will support. I noticed that Digium allows Asterisk users to register and download G729a, but refers to it as G729 on it's pages. I also noticed that on

Hi all, We have already bought 30 Digium G.729 licenses to install in several machines, but Digium only has provided on key to use in registration. We suspect that the registration has assigned the whole 30 licenses to the same server. Do anyone know how to distribute the licenses among several servers? Thanks in advance. -- Arturo D?az Contact me on FWD: 870436 Skype: arturo.diaz.almagro

I am looking for a large number (probably about 100 or so) low-cost phones that I can hang on the wall. I need the phones to use PoE. Do the Uniden phones support wall-mounting? These phones are not going to be high-usage; they simply need to be there in case of an emergency. Another question, along the same kind of lines, has anyone figured out how to keep the SoundPoint IP 600 receiver

Seeing that many people here hit problems with activating their G.729 licenses, I decided to post my opinion. I have purchased two G.729 licenses, for my private use. I did this even though VoiceAge makes G.729 free for private use, as Windows libraries. I guess a sufficiently motivated person could take the COFF libraries, run them through objcopy on cygwin (producing ELF .o files) and link them

> -----Original Message----- > From: Richard Lyman [mailto:pchammer@dynx.net] > Sent: Wednesday, December 20, 2006 4:29 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Re: Match a Numer - then continue with, > dialplan > > > Douglas Garstang wrote: > >> -----Original Message----- > >> From: David

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

I own a G729b codec from voiceage which I had from Digium a couple of months ago , I friend of mine had the new Digium G729 codec which registers in the asterisk as a Annex A/B codec, the problem that we saw is that the call goes thru find but we cannot here any sound. Asterisk is showing this : -- SIP/10.10.1.1-babc is ringing -- SIP/10.10.1.1-babc answered

> -----Original Message----- > From: David Gomillion [mailto:dgomillion@eyecarenow.com] > Sent: Wednesday, December 20, 2006 10:27 AM > To: asterisk-users@lists.digium.com > Subject: [asterisk-users] Re: Match a Numer - then continue with, > dialplan > > > I think you're making it far too difficult. > > What I do is something like this: > > [outgoing]

Problem: Polycom SoundPoint IP phones (running SIP) ceases to send DTMF that Asterisk can detect and use. It worked in 1.0.5, but has not worked since. This has been verified on SoundPoint IP 300's and SoundPoint IP 600's. Workaround: It used to be that for DTMF to work, I had to set the mode in sip.conf to "inband". Without making any configuration changes on the

Hi, Does the G.729 module support adding more licences??

I have multiple voiceage g729 licenses installed on a RH9 box, and have a remote C7960 configured to use it (low bandwidth). In calls like: Remote C7960 -> g729 -> asterisk -> g711 -> C7960 the audio is oftentimes rather choppy. Changing the remote 7960 to use g711 seems to eliminate/reduce the choppyness. Any ideas on what might be behind this?

Hi there, im having some problems with my asterisk box, it seems codec is the principal cause of it. Reading in some forums i found that i can get the new codec_g729 from ftp://ftp.digium.com/pub/telephony/asterisk/g729/new_codec_binary/codec_g729b.so i checked it but the directory new_codec_binary doesnt exist. Anybody knows where can i found it?? Thanks for your help. Carlos Andres Medina

Hello, You can use ZapBarge as an extension in your dialplan to listen in on conversations going on in Zap channels(Zaptel device channels) As for recording you can use the Manager interface command StartMonitor to start recording of a Zap channel and StopMonitor to stop it. Zap channels are pretty much the only ones right now that you can directly monitor and record through Asterisk. If

Sorry that got accidentally sent incompleted, here's the full post: OK, here is the long drawn out description of how I am using Zap Barge and Monitor: Zapbarge(listen in on live calls): Very simple actually I just added this to my dial plan(extensions.conf): ; barge monitoring extension exten => 8159,1,ZapBarge exten => 8159,2,Hangup Then when you dial 8159 on

Having purchased a license for 5 g729 channels on Digium's web shop I thought registration and installation would be a snap. NOT. I followed registration instructions to the letter but it failed with that message: ERROR! Your Internet connection is probably behind a proxy and the Registration program can't communicate with our server Which is stupid as my * box is a firewall and sits

Hi, i have a problem trying to register the codec G729, my licence is valid but when i try to Register i got the following error: "Registration unsuccessful... Error code: 110 ERROR! Your Internet connection is probably behind a proxy and the Registration program can't communicate with our server, however it has created the file: /var/lib/va-infoclient

I Purchased 4 licences for my SCSI only machine. I do have a CDROM - with a mounted CD. The Registration binary gives me a 'Segmentation Fault'. Is this like telling me I can't register the licence? Unfortunately - I only seriously scanned the mailing list after buying the keys.... Seems like the licence insists on using an IDE drive to create some sort of unique serial number.. Has

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 2730 bytes Desc: image001.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040113/2fec80ee/attachment.gif