similar to: Residential services

Hello all. I'm new to asterisk and have been using and testing it for about a week now. My initial hope has been to use it as a sip<->h323 gateway to tie SIP & H323 based ip phones together with my Cisco AS5300 and Lucent MaxTNT/MVAM networks. I am currently running Asterisk 0.5.0 under Redhat 9 on a single PIII 800 with 256megs RAM. I have tried a couple CVS version from the past

Hello all, I have a cisco AS5300 which is register with a gatekeeper and a Asterisk server also register with the gatekeeper. PSTN ---->AS5300 ---->Gatekeeper ---->Asterisk I set up a conference room on the Asterisk sever (Room No 1234). I try to call from PSTN to AS5300, The AS5300 will call the Asterisk server through the gatekeeper. I manage to get to the start of the conference

Hello, I am new to this list and to asterisk and going through the archive file I did not find an answer to my problem. I have a VoIP network working fine with multiple gateways registered to a Cisco H.323 Gatekeeper. I have successfully registered Asterisk as a GW in that network and also successfully registered two X-Lite SIP Client to asterisk that call to each other. I want to connect to

Hello folks, I'm trying to get an 8x8 DTA-310 running mgcp to work. I get no dialtone & can't get it to ring. My mgcp.conf says: ; ; MGCP Configuration for Asterisk ; [general] port = 2427 bindaddr = 0.0.0.0 [172.16.2.25] host = 172.16.2.25 context = default line => aaln/1 And here's the interesting bits of extensions.conf: [globals] ... TRUNK=H323/BYEXTENSION@pstn_gw ...

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec

hello, my situation is h323gw - gatekeeper - asterisk - SIP client my problem is, that I can't make call from h323gw, when this GW is Micronet (sp5004). A ----------- CUT ----------- -- Executing Wait("H323/ip$62.152.225.18:52434/20702", "1") in new stack == Spawn extension (postel, 169, 1) exited non-zero on 'H323/ip$62.152.225.18:52434/20702' -----------

Hi, First at alll, I beg your pardon because maybe I explained bad my questions (because my low level english) I have asterisk 0.5.0, asterisk-oh323-0.5.6, openh323-1.12.2 and pwlib 1.5.2 compiled and installed. I have modules alsa 0.9.8 compiled and installed My PC has an audio card ac97 chipset intel i810 in its motherboard. I want to use asterisk in this way: |PC linux | --ethernet--

I am experimenting with oh323 channels and h.323 gateways and a Cisco CallManager. I am not using a gatekeeper at this time. Is it possible to place calls coming into Asterisk from specific peers into specific contexts? In iax.conf eaxh peer has a context in which I can specify the context an inbound call will be placed in. I don't see anything like this in the oh323.conf file or the oh323

Dear List, Can anyone recommend a sip phone for residential use? (asterisk home pbx) Thanks!!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040819/7b107ebc/attachment.htm

Hello, I have 5 digium's g.729 codecs and succesfully register with asterisk, I have incomming call from my cisco AS5300 to Asterisk through IP. But Asterisk always use g711 ulaw instead of g.729. When I disable all other codecs other than g.729 in both cisco and asterisk, calls get dropped once connected. The codec list show on my cisco AS5300 for g.729 are: g729r8 g729br8 I suspect that

Good time of day all! 1) I am trying to use as5300 and asterisk. As5300 sends calls to me. I get the following in * console: -- IAX2/magrathea/6 is making progress passing it to OH323/R27464 Sep 8 10:57:59 NOTICE[1140046640]: chan_oh323.c:1159 oh323_indicate: Ignoring PROGRESS indication. As5300 user does not hear anything, just silense instead of dial tones. My config is oh323.conf

Hello List. I just installed a2billing with asterisk 1.6 and got it working. The only problem is that I'm trying to setup something to manage who's using the most minutes in the house. I noticed a2billing only works for callin cards setups, or maybe I didn't configure it correctly for what I want. Can I use a2billing for "?VoIP residential services"? if yes, how? if no,

Hi Now, my Cisco AS5300 sent call to my asterisk, but two problems: When i call the phone number, i have: [Oct 28 06:01:16] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension '0426000000' rejected because extension not found. [Oct 28 06:01:18] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension

Guys. I need some advice on some h323 issues. I need to test connectivity from Asterisk to a Cisco AS5300 that has PSTN lines and to cisco 3600 voip routers. H323 needs to be used here but I was wondering if anybody has linked Asterisk to these Cisco routers before? Thank you for any pointers.

Hi all, I realize this is OT. I just got a Cisco AS5300, and I need to configure it like such: Asterisk -----(H323/SIP)------> Cisco ----- (E1/PRI)------->Telco So calls originate from the Asterisk side (registered users on SIP or just ZAP phones), and they go out H323 or SIP to Cisco, where they go out PRI. I have the Asterisk side sorted :) (either H323 or SIP), I need help in the

I've done some reviewing of the archives for G729 and H323 experiences. The landscape of that query isn't pretty - lots of pleas for help, and nor do I see too many "answers." I have a pending bid that requires some data before I can implement * on this particular solution. My question is perhaps a slightly differently worded one than has been asked before, but it may be

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

Hello, We are working on implementing a solution for a medium service provider. They were previously using a Cisco AS5300 gateway with some PRI trunks to receive modem calls, then route them out the Internet. The Telco they were buying the trunks to discovered this configuration and restricted them due to legal conventions, and stated that in order to continue doing this, they would have to talk

Hello, I have a Cisco AS5300 connected to Asterisk (1.6.2.9) Between 15-16 minutes, the call is disconnected without reason. Here is what is displayed in the debug: Received an SDES from 10.4.0.10:17399 -- Got SIP response 420 "Bad Extension" back from 10.4.0.10 -- Stopped music on hold on SIP/as5300-1-0000004d == Spawn extension (dialin, 065939191, 2) exited non-zero on